共找到 284 条与 热处理 相关的标准,共 19 页
本标准规定了钢制零件渗碳及碳氮共渗淬火硬化层深度的含义及其测定方法。 本标准适用于渗碳和碳氮共渗淬火硬化层;并经最终热处理后,距表面3倍于淬火硬化层深度处硬度值小于450HV的零件。 不能满足上述条件的钢件,应根据专门协议确定硬化层深度。 对于距表面3倍于淬硬层处硬度值高于450HV的钢件,本标准仍然有效,前提条件是选择硬度值大于550HV(以25HV为一级)的某一特定值作为界限硬度。
Steels-Determination and verification of the depth of carburized and hardened cases
本标准规定了钢制零件经过感应淬火或火焰淬火后有效硬化层深度的(DS)的含义及其测定方法。 本标准适用于感应淬火或火焰淬火后有效硬化层深度大于0.3mm的零件。
Determination of effective depth of hardening after induction or flame hardening of steel
本标准规定了热处理生产过程中安全、卫生的通用技术要求。 本标准适用于热处理生产和为热处理生产提供生产装置以及与热处理生产有关的新技术和新产品开发、技术引进、长远规划、工厂设计和技术改造。 本标准中的卫生系指热处理生产过程中的卫生工程技术和组织管理。 本标准中的热处理系指对金属或合金及其制品进行热处理。
Requirements for the safety and health in production process of metal heat treatment
本标准规定了热处理炉有效加热区的测定方法。 本标准适用于评定热处理炉内满足热处理工艺规定的加热温度及保温精度的有效加热区。不适用于连续加热炉中没有固定的工艺规定加热温度或不要求保温精度的加热区。
Testing method for work zone of heat treatment furnace
本标准规定了与热处理有关的加热介质、淬火冷却介质、化学热处理渗剂、热处理保护涂料等热处理工艺材料主要名词术语、定义及英文对照。 ’ 本标准适用于热处理专业技术相关标准及技术文件等。
The terminology of technological materials for heat treatment
本标准规定了钢件在含氨气氛中加热的气体渗氮工艺、设备、检验及安全要求等。 本标准适用于优质碳素结构钢、合金结构钢、合金工具钢、不锈钢及耐热钢等的气体渗氮。
Gas nitriding of steel parts
本标准规定了金属热处理工艺主要术语的定义及英文对照。 本标准适用于金属热处理工艺技术标准及技术文件等。
Terminology of metal heat treatment
本标准规定了炉中加热的钢件淬火与回火技术要求及方法。
Quenching and tempering of steel parts
本标准规定了炉中加热的钢件正火与退火的技术要求及方法。
Normalizing and annealing of steel parts
本标准规定了热处理生产过程中安全、卫生的通用技术要求。 本标准适用于热处理生产和为热处理生产提供生产装置以及与热处理生产有关的新技术和新产品开发、技术引进、长远规划、工厂设计和技术改造。 本标准中的卫生,系指热处理生产过程中的卫生工程技术和组织管理。 本标准中的热处理,系指对金属或合金及其制品进行热处理。
Requirements for the safety and health in production process of metal heat treatment
本标准规定了金属材料热处理工艺的分类方法及工艺代号的表示方法。 本标准适用于机械制造行业。铝合金热处理工艺代号可参照本标准执行。
Classification and designation on metal heat treatment
本标准规定了钢铁零件表面渗氮层深度的测定方法和渗氮前后金相组织的评定级别。 本标准适用于气体渗氮、离子渗氮、氮碳共渗(软氮化)处理后的钢铁零件表面渗氮层深度、脆性、疏松、及脉状氮化物的测定与评定。
Steel-iron parts--Determination of nitrided case depth and metallographic examination of nitriding structure
本标准规定了钢制零件薄表面总硬化层深度或有效硬化层深度的含义及其测定方法。 本标准适用于: a.表面总硬化层深度或有效硬化层深度小于或等于0.3mm的钢制零件。 b.钢制零件表面硬化层一般用下列方法获得:机械处理(喷丸强化、滚轧强化、喷镀等)、化学热处理(渗碳淬火、碳氮共渗、氮碳共渗、渗氮处理等)、热处理(感应淬火或火焰淬火等)。 c.本标准不适用于硬化层与基体金属之间无过渡区的零件。
Determination of total or effective thickness of thin surface hardened layers of steel parts
本标准规定了钢制零件渗碳及碳氮共渗淬火有效硬化层深度的含义及其测定方法。 本标准适用于: a.渗碳和碳氮共渗有效硬化层(DC)深度大于0.3mm的零件。 b.经热处理至最终硬度值后,离表面三倍于有效硬化层处硬度小于450HV的零件。
Determination and verification of the effective depth of carburized and hardened cases of steel parts
This document specifies the manner of presenting and indicating the final condition of heat-treated ferrous parts in technical drawings.
Technical product documentation - Heat-treated ferrous parts - Presentation and indications (ISO 15787:2016)
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions
Thermal spraying - Determination of tensile adhesive strength
Thermal spraying - Terminology@ classification
Oil-based quenching media for heat treatment
Polyalkylene glycol (PAG) water-soluble quenching medium for heat treatment
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号