J55 磨床 标准查询与下载

JB/T 4065.1-2014 滚刀铲磨床 第1部分:型式与参数

JB/T 4065的本部分规定了滚刀铲磨机床的型式和参数。 本部分适用于最大工件直径63 mm~500 mm、工作台移动式普通精度级的滚刀铲磨床（以下简称机床）。

Hob relieving grinding machines.Part 1: Types and parameters

JB/T 4065.3-2014 滚刀铲磨床 第3部分:精度检验

JB/T 4065的本部分规定了一般用途，普通精度级滚刀铲磨床的几何精度、工作精度检验方法以及相应的公差。 本部分适用于最大工件直径63 mm~250 mm，工作台移动式普通精度级的滚刀铲磨床（以下简称机床）。

Hob relieving grinding machines.Part 3: Testing of the accuracy

JB/T 4145.2-2014 落地导轨磨床 第2部分:技术条件

JB/T 4145的本部分规定了落地导轨磨床的制造与验收的要求。 本部分适用于最大磨削宽度800 mm~1 600 mm、最大磨削长度3 000 mm~14 000 mm的落地导轨磨床。

Floor-type surface grinding machines for grinding slideways.Part 2: Specifications

JB/T 6340.5-2014 轧辊磨床 第5部分:砂轮架移动式重型机床 精度检验

JB/T 6340的本部分规定了重型砂轮架移动式轧辊磨床的几何精度、工作精度和轴线的定位精度、重复定位精度的检验方法及相应的公差。 本部分适用于最大磨削直径1 000 mm~3 150 mm，最大工件长度5 000 mm~20 000 mm、最大工件重量100 000 kg~300 000 kg的重型普通精度的砂轮架移动式轧辊磨床（以下简称机床）。

Roll grinding machines.Part 5: Heavy duty machine tools with wheelhead carriage longitudinal travel.Testing of the accuracy

JB/T 7418.4-2014 外圆磨床 第4部分:砂轮架移动式机床 精度检验

JB/T 7418的本部分规定了一般用途、普通精度的砂轮架移动式外圆磨床的几何精度、工作精度和轴线的定位精度、重复定位精度的检验方法以及相应的公差。 本部分适用于最大磨削直径500 mm~2 000 mm、最大工件长度3 000 mm~10 000 mm的普通精度的砂轮架移动式外圆磨床。

External cylindrical grinding machines.Part 4: Machines with a movable wheelhead.Test of the accuracy

JB/T 7422.2-2014 立式内圆珩磨机 第2部分:精度检验

JB/T 7422的本部分规定了立式内圆珩磨机的几何精度和工作精度检验的要求和检验方法。 本部分适用于珩孔直径25 mm~1 000 mm的一般用途的立式内圆珩磨机。

Vertical internal cylindrical honing machines.Part 2: Testing of the accuracy

JB/T 9924-2014 磨削表面波纹度

本标准规定了磨削表面波纹度的评定方法和原则。 本标准适用于磨削加工的圆柱面、圆锥面和以圆周磨削方式加工的平面。对于磨削加工的轴承滚道面、齿轮齿面、螺纹螺旋面和以端面磨削方式加工的平面及其他磨削表面，也可参照选用。

Grinding surface waviness

JB/T 7422.4-2013 立式内圆珩磨机 第4部分 :珩磨头 参数

JB/T 7422的本部分规定了立式内圆珩磨机用的珩磨头的参数。本部分适用于新设计的普通型、半自动型及数控型立式内圆珩磨机用的珩磨头。

Vertical internal cylindrical honing machines.Part 4: Honing tool parameters

JB/T 7422.1-2013 立式内圆珩磨机 第1部分:型式与参数

JB/T 7422的本部分规定了立式内圆珩磨机的型式与参数。本部分适用于新设计的普通型、半自动型及数控型立式内圆珩磨机。

Vertical internal cylindrical honing machines.Part 1: Types and parameters

KS B ISO 3875:2013 机床.外圆无心磨床试验条件.精度检验

External cylindrical centerless grinding machines-Testing of the accuracy

DIN EN ISO 11148-7:2013 手持式非电动工具.安全性要求.第7部分:螺纹磨床(ISO 11148-7-2012).德文版本EN ISO 11148-7-2012

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter "grinders") intended for grinding and cutting-off with abrasive products,for use on all kinds of materials. The grinders can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands,with or without a suspension,e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012); German version EN ISO 11148-7:2012

KS B ISO 1986-1:2012 水平轴4角矩台型平面磨床.精度检验.第1部分:台长为1600mm以下的磨床

이 표준은 KS B ISO 230-1을 기초로 하여 보통 정확정밀도를 가진 범용으로 사용하

Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1: Machines with a table length of up to 1600 mm

KS B ISO 2407:2012 水平轴内圆筒磨床机检查条件.术语及准确精密度试验

이 표준은 KS B ISO 230-1에 기초하여 단면 연삭 숫돌 헤드 유무에 관계 없이 일

Test conditions for internal cylindrical grinding machines with horizontal spindle-Testing of the accuracy

KS B ISO 2433:2012 机床.工作台移动式万能外圆磨床检验条件.精度检验

이 표준은 KS B ISO 230-1 및 KS B ISO 230-2에 기초하여 일반적인 정

Machine tools-Test conditions for external cylindrical and universal grinding machines with a movable table-Testing of the accuracy

KS B ISO 8636-1:2012 机床工具.桥型磨床的试验条件.精度试验.第1部分:固定桥(门架形)机器

이 표준은 KS B ISO 230-1과 KS B ISO 230-2에 기초하여 일반적인 정확

Machine tools-Test conditions for bridge-type milling machines-Testing of the accuracy-Part 1:Fixed bridge(portal-type) machines

ISO 11148-7:2012 手持非电动工具.安全性要求.第7部分:螺纹磨床

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “grinders”) intended for grinding and cutting-off with abrasive products, for use on all kinds of materials. The grinders can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer. NOTE 1 At the time of publication, no grinders driven by internal combustion engines are known (other than cuttingoff machines within the scope of ISO 19432). Once these are identified, it is intended to amend this part of ISO 11148 to include such power tools. This part of ISO 11148 is applicable to grinders used with: — abrasive products with a peripheral operating speed less than or equal to 80 m/s; — cutting-off wheels with a peripheral operating speed less than or equal to 100 m/s; — abrasive products with an outside nominal diameter less than or equal to 230 mm; — cutting-off wheels with an outside nominal diameter less than or equal to 250 mm; — wire brushes; — diamond and reinforced (segmented) wheels with an outside nominal diameter less than or equal to 450 mm; — flap discs and flap wheels. NOTE 2 For examples of grinders, see Annex B. NOTE 3 Typical abrasive products used together with hand-held grinders are listed in Annex D. This part of ISO 11148 does not cover special requirements and modifications of grinders for the purpose of mounting them in fixtures. This part of ISO 11148 is not applicable to: — die grinders with collets, which are treated in ISO 11148-9; — polishers and sanders (i.e. tools used with coated abrasives except flap discs and flap wheels), which are treated in ISO 11148-8; — cutting-off machines which are driven by internal combustion engines and are used for cutting construction materials, which are treated in ISO 19432; — shaft-mounted wire brushes, which are treated in ISO 11148-9. 1 This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of grinders in potentially explosive atmospheres. NOTE 4 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

DIN EN ISO 11148-9:2012 非电动手持工具.第9部分:安全要求.冲压磨床

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011); German version EN ISO 11148-9:2011

ISO 666:2012 机床.轮毂式法兰平面磨轮的安装

This International Standard specifies the essential requirements, especially the dimensions, for hub flanges for plain grinding wheels according to ISO 603-1, ISO 603-2, ISO 603-4, ISO 603-6, ISO 603-7 and ISO 603-8, with a ratio of the bore diameter to the outside diameter H/D > 0,2. It is also applicable to super abrasives with vitrified or metal core having the same diameters as the grinding wheels in accordance with the according to the aforementioned parts of ISO 603, independently from the material of the core. It applies to grinding wheels with peripheral speeds up to 50 m/s and driving powers of the wheel spindle up to 30 kW. It is not applicable to mounting devices for cutting-off wheels.

Machine tools - Mounting of grinding wheels by means of hub flanges

BS EN ISO 11148-8:2011 手持非电动工具.安全性要求.砂轮机和抛光机

Hand-held non-electric power tools. Safety requirements. Sanders and polishers

BS EN ISO 11148-9:2011 手持式非电动工具.安全性要求.冲压磨床

Hand-held non-electric power tools. Safety requirements. Die grinders