J65 木工机床及机用工具 标准查询与下载

GB/T 13569-1992 木工平刨床 精度

本标准规定了木工平刨床的几何精度和工作精度。 本标准适用于木工平刨床。

Woodworking machines--Surface planing machines with cutterblock for one side dressing--Accuracy tests

GB/T 13568-1992 细木工带锯机 精度

本标准规定了细木工带锯机的几何精度和工作精度。 本标准适用于细木工带锯机。

Woodworking machines Table bandsawing machines Accuracy tests

GB/T 13572-1992 二、三、四面木工刨床 精度

本标准规定了二、三、四面木工刨床的几何精度和工作精度。 本标准适用于一般用途的二、三、四面木工刨床。

Woodworking machines--planing machines for two,three or four-side dresing--Accuracy test

GB/T 13573-1992 木工圆锯片

本标准规定了木工圆锯片的型式和尺寸，技术要求，检验规则，标志、包装、运输和贮存的基本要求。 本标准适用于木工圆锯机上纵剖或横截木材用的木工圆锯片（以下简称锯片）。

Circular saw blades for woodworking

GB/T 12448-1990 木工机床型号编制方法

本标准规定了木工机床的类、组、系的划分及其型号表示方法。 本标准适用于各类木工机床。

Woodworking machines--Technical classification of woodworking machines and auxiliary machines for woodwooking

GB/T 10961-1989 木工机床操作指示形象化符号

本标准规定了木工机床操作指示标牌和控制系统上的一些形象化符号。 本标准适用于所有木工机床的操作指示标牌、操作面板和标志。

Symbols for indications appearing on woodworking machinery

GB/T 10959-1989 带移动工作台木工锯板机 精度

本标准规定了最大加工长度大于等于2000mm的带移动工作台木工锯板机的精度。 本标准适用于最大加工长度大于等于2000mm带移动工作台木工锯板机。

Woodworking machines--Single blade circular sawing machines with travelling table--Accuracy tests

GB/T 10960-1989 锯片往复木工锯板机 精度

本标准规定了最大加工长度大于等于2000mm的锯片往复木工锯板机的精度。 本标准适用于最大加工长度大于等于2000mm的锯片往复木工锯板机。

Woodworking machines--Single blade stroke circular sawing machines--Accuracy tests

GB 3770-1983 木工机床噪声声功率级的测定

Determination of sound power level of noise from woodworking machine tools

GB/T 3770-1983 木工机床噪声声功率级的测定

本标准适用于各类木工机床噪声的测量。 本标准规定了一种在包络木工机床的假想测量表面上测量声压级并通过计算求得其声功率级的工程法，测量A声功率级的标准偏差不大于2dB。 本标准是参照国家标准GB3767-83《噪声源声功率级的测定--工程法及准工程法》制定的。

Determination of sound power level for noise emitted by wood working machinery

BS EN ISO 19085-17:2021 木工机械 安全 链条封边机

Woodworking machines. Safety. Edge banding machines fed by chains

ISO 19085-17:2021 木工机械. 安全. 第17部分: 链式送料边缘铁条打捆机

Woodworking machines - Safety - Part 17: Edge banding machines fed by chains

DIN 8816:2021 木材加工机械用带螺纹的刀夹. 刀柄和轴端

This document specifies dimensions and technical delivery conditions for threaded tool adaptors for stationary and portable wood working machines.

Threaded tool adaptors for wood working machines; tool shanks and spindle ends

ISO 19085-1:2021 木工机械. 安全. 第1部分: 通用要求

This document gives the safety requirements and measures to reduce risks arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping, related to woodworking machines capable of continuous production use, hereinafter referred as “machines”. These safety requirements and measures are those common to most of the machines, when they are used as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. The machines are designed to process solid wood and material with similar physical characteristics to wood, with hand feed or integrated feed. This document is intended to be used in conjunction with the other parts of the ISO 19085 series, applicable to specific machine types. The extent to which all significant hazards of a specific machine type are covered is indicated in the specific part of the ISO 19085 series relevant to that machine type. The hazards covered, at least partly, by the requirements of this document, are listed in Annex A. It is not applicable to machines intended for use in potential explosive atmospheres or to machines manufactured prior to the date of its publication.

Woodworking machines - Safety - Part 1: Common requirements

DIN 7489:2021 木工钻. 塞刀

This document specifies dimensions and technical delivery conditions for hollow augers for woodworking for form A and form B. For hollow augers not covered by this document (e. g. drawing based ones) the application of this document may be subject of agreement between customer an

Wood bits - Plug cutter

DIN 6442:2020 木工钻. 榫眼(扭曲版)

This document specifies dimensions and technical delivery conditions for straight flute bits (straight flute drills) for wood. For straight flute bits for wood not covered by this document (e. g. drawing based ones) the application of this document may be subject of agreement bet

Wood bits - Mortise bit (twisted version)

JB/T 13934.1-2020 数控木工五面多轴钻床 第1部分：参数

CNC Woodworking Five-Side Multi-Axis Drilling Machine Part 1: Parameters

JB/T 13931.2-2020 木工复合加工中心 第2部分：精度

Woodworking Composite Machining Centers Part 2: Precision

JB/T 13931.3-2020 木工复合加工中心 第3部分：技术条件

Woodworking composite processing center Part 3: Technical conditions

JB/T 13934.3-2020 数控木工五面多轴钻床 第3部分：技术条件

CNC Woodworking Five-Side Multi-Axis Drilling Machine Part 3: Technical Conditions