J65 木工机床及机用工具 标准查询与下载

DIN EN ISO 19085-5:2018 木工机械.安全.第5部分:维度锯(ISO 19085-5-2017);德文版本EN ISO 19085-5-2017

This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable dimensions saws, designed to cut wood and material with similar physical characteristics to wood, when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017); German version EN ISO 19085-5:2017

DIN EN ISO 19085-1:2018 木工机械.安全.第1部分:通用要求(ISO 19085-1-2017);德文版本EN ISO 19085-1-2017

This International Standard is applicable to woodworking machines with cutting tools and/or sanding tools as defined in 3.1 when they are used as intended and under the conditions foreseen by the manufacturer. This document contains the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping: those that are common to most of such machines.

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017); German version EN ISO 19085-1:2017

DIN EN 1870-6:2018 木材加工机械的安全性.圆形锯床.第6部分:柴火加工用圆形锯床;德文版本EN 1870-6-2017

This document deals with all significant hazards, hazardous situations and events which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading, designed to cut solid wood. On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine for firewood is covered by this European Standard.

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood; German version EN 1870-6:2017

ISO 19085-4:2018 木工机械.安全.第4部分:立式圆盘锯机

This document gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as “machines”. NOTE 1 In manual loading, the operator puts the work-piece directly onto the work-piece support, with no intermediate loading device to receive and transfer the work-piece from the operator to the cutting position. In manual unloading, the operator removes the work-piece directly from the work-piece support, with no intermediate unloading device to transfer the work-piece from the cutting position to the operator. It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — an integrated feed device; — a device for scoring; — an angle cutting device; — a middle support device; — programmable end stops for parallel vertical cuts; — a device for grooving with a width of at most 20 mm in one pass by using a milling tool; and — a panel pusher. The machines are designed for cutting panels consisting of: a) solid wood; c) composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy; e) gypsum boards, gypsum bounded fibreboards. b) material with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2); d) polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; and This document does not apply to machines — with pressure beam and saw unit mounted behind the work-piece support;  1  — where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel; — designed to cut in vertical direction only; — which are displaceable; — automatically performing two or more cutting cycles in sequence; — intended for use in potentially explosive atmosphere; and — manufactured before the date of its publication.

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines

DIN EN 847-1:2018 木工加工工具.安全性要求.第1部分:铣刀和圆盘锯条.德文版本EN 847-1-2017

This European Standard specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This European Standard deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades. This European Standard does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 4. This European Standard does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards. This European Standard is not applicable for shanks of tools according to this scope, which are manufactured before the date of its publication as EN.

Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades; German version EN 847-1:2017

ISO 19085-8:2017 木工机械. 安全性. 第8部分：直工件砂带打磨校准机

This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as “machines”. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. NOTE 1 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — transversal sanding unit; — cleaning brushing unit; — satining roller unit; — disk brushing unit; — texturing brushing roller unit; — texturing brushing belt unit; — cutterblock unit; — texturing band saw unit; — spiked roller unit; — antistatic bars; — conveyor directly controlled by the machine; — additional work piece vacuum clamping device. The machines are designed to calibrate and/or sand work pieces, in shape of panels or beams, consisting of: a) solid wood; c) gypsum boards, gypsum bounded fibreboards; b) material with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2); d) composite materials with core consisting of e.g. polyurethane or mineral material;  1  e) f) composite boards made from the materials listed above; all materials listed above, also already lacquered. This document does not deal with hazards related to: — specific devices other than those listed above; — access through in-feed and out-feed openings of machines with a work piece height capacity greater than 550 mm; — systems for automatic loading and/or unloading of the work piece to/from a single machine; NOTE 2 Loading the machine manually includes manually placing the work piece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the work piece from a conveyor directly controlled by the machine. — interfacing of the machine with any other machine. It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to the date of its publication.

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces

ISO 19085-3:2017 木工机械.安全要求.第3部分:数控（NC）镗铣机

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines

BS EN ISO 19085-5:2017 木工机械.安全.维度锯

Woodworking machines. Safety. Dimension saws

BS EN ISO 19085-1:2017 木工机械.安全.通用要求

Woodworking machines. Safety. Common requirements

ISO 19085-1:2017 木工机械.安全.第1部分:通用要求

Woodworking machines - Safety - Part 1: Common requirements

ISO 19085-2:2017 木工机械.安全.第2部分:水平梁板圆锯机

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines

ISO 19085-5:2017 木工机械.安全.第5部分:维度锯

This document gives the safety requirements and measures for stationary and displaceable dimension saws, hereinafter referred to as “machines”, designed to cut wood and material with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — device for the main saw blade and scoring saw blade to be raised and lowered; — device to tilt the main saw blade and scoring saw blade for angled cutting; — device for scoring; — device for grooving with milling tool with a width not exceeding 20 mm; — demountable power feed unit; — post-formed edge pre-cutting unit; — power-operated sliding table; — workpiece clamping. NOTE 3 Dimension saws are used for ripping, cross cutting, dimensioning and grooving. It is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

Woodworking machines - Safety - Part 5: Dimension saws

DIN EN 50632-3-1:2017 电动操作工具.粉尘测量规程.第3-1部分:移动式锯床的特殊要求;德文版本EN 50632-3-1-2016

Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws; German version EN 50632-3-1:2016

BS EN 50632-3-1:2016 电动操作工具. 粉尘测量规程. 移动式锯床的特殊要求

Electric motor-operated tools. Dust measurement procedure. Particular requirements for transportable table saws

SN/T 3193.7-2016 进口轻工业成套设备检验技术要求 第7部分：木材加工设备

Technical requirements for inspection of imported light industry complete sets of equipment Part 7: Wood processing equipment

DIN EN 12779:2016 木材加工机械安全性.带固定装置的碎片和灰尘排出系统.安全要求.德文版本EN 12779-2015

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements; German version EN 12779:2015

DIN EN ISO 18217:2015 木工机械的安全.链式送料边缘铁条打捆机,(ISO 18217-2015);德文版本EN ISO 18217-2015

Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015); German version EN ISO 18217:2015

BS EN 12779:2015 木工机械安全性.带固定装置的除碎屑及吸尘装置.安全要求

Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements

NF E64-608-4:2015 木工机床的安全性.链式送料边缘胶粘带捆包机

Safety of woodworking machines - Edge-banding machines fed by chain(s)

JB/T 12569.2-2015 原木双侧多锯片木工圆锯机 第2部分:技术条件

JB/T 12569的本部分规定了原木双侧多锯片木工圆锯机(以下简称机床)的一般要求、主要参数、性能、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本部分适用于原木双侧多锯片木工圆锯机。

Log bilateral multi-blade saw machine of woodworking.Part 2: Technology conditions