共找到 116 条与 热处理设备 相关的标准,共 8 页
이 규격은 직립 드릴링 머신, 레이디얼 드릴링 머신 및 다축 드릴링 머신에 사용하는 주축
Spindle noses for drilling machines
Dryers and ovens, in which flammable substances are released - Safety requirements; German version EN 1539:2000, Corrigenda to DIN EN 1539:2000-03
A-A-59375, dated 27 June 2000, has been reviewed and determined to be valid for use in acquisition.
FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE
Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design
Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design
이 규격은 설치 장소에 옮겨지기 전에 완전히 조립되어 자유롭게 세울 수 있고, 가정용 붙
Solid fuelled heaters-Test method for determining allowable clearances from combustible surfaces
本标准规定了金属合金制件在液态介质中实行淬火冷却设备的技术条件。 本标准适用于铁和非铁合金淬火和固溶处理冷却用的水、油、无机盐、碱水溶液、有机聚合物水溶液等的浸入式冷却设备。
Technological requirements of liquid quenching apparatus
Ammonia-Water Absorption Heat and Mass Transfer in Microchannel Absorbers with Visual Confirmation
Ammonia-Water Absorption Heat and Mass Transfer in Microchannel Absorbers with Visual Confirmation
Natural Convection Heat Transfer for Fin-Tube Heat Exchangers
Natural Convection Heat Transfer for Fin-Tube Heat Exchangers
이 규격은 플라스틱용 금형(사출, 압축 성형 및 트랜스퍼 성형)에서 사용하는 이젝터 핀 중
Main plates for moulds for plastics
이 규격은 주로 플라스틱과 고무 사출용 몰드 금형에 사용하는 스프루 부시(이하 스프루 부시
Tools for moulding-Sprue bushes-Dimensions
The document gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. The limits of the equipment will include any transportation equipment which is located wholly or partially in the bath.#,,#
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; German version EN 746-5:2000
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; German version EN 746-8:2000
이 규격은 일반적으로 사용하는 플라스틱 성형을 위한 수평형 사출 성형기(이하 사출 성형기라
Horizontal type injection plastic moulding machines
This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Quenching Equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not cover specific hazards and safety requirements for Salt Bath bath equipment used as a quenching means (see EN 746-5:2000). This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the quenching media and processed material outside the limits of the equipment. This part of EN 746 standard applies not only to the normal operation of the equipment but also to the safety of personnel and property when foreseeable faults occur in them. Examples of quenching equipment are shown in Fig. 1 and Fig. 2. NOTE: There are many variations in the design of quenching equipment. Only two examples of the various types are given in this text.
Industrial thermoprocessing equipment - Particular safety requirements for quenching equipment
This part of EN 746 gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. The limits of the equipment will include any transportation equipment which is located wholly or partially in the bath. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the salts and processed material outside the limits of the equipment. This part of EN 746 applies not only to the normal operation of the equipment but also to the safety of personnel and property when foreseeable faults occur. Examples of salt bath furnace set-ups are shown in Fig. 1, Fig. 2, Fig. 3 and Fig. 4. NOTE: There are many variations in the design of salt bath equipment. Only three examples of the various types are given in this text.
Industrial thermoprocessing equipment - Particular safety requirements for salt bath thermoprocessing equipment
The document applies to indirectly heated and internally electrically heated heat treatment furnaces for treatment of metallic materials.
Heat treatment furnaces - Part 1: Requirements for temperature uniformity
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE [Superseded: DLA MIL-F-80258 A CANC NOTICE 1, DLA MIL-F-80258 A, DLA MIL-F-80258]
이 규격은 플라스틱용 금형에 사용하는 센터링 슬리브에 대하여 규정한다.
Centring sleeves of moulds for plastics
이 규격은 플라스틱용 금형에 사용하는 테이퍼 로크에 대하여 규정한다.
Taper lock of moulds for plastics
이 규격은 플라스틱용 금형에 사용하는 이젝터 가이드 핀에 대하여 규정한다.
Ejector guide pins of moulds for plastics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号