K23 直流电机 标准查询与下载

JB/T 10690-2007 无槽无刷永磁直流电动机通用技术条件

本标准规定了无槽无刷永磁直流电动机的安装型式、基本参数、要求、试验方法、容差、检验规则，质量保证期以及标志、包装和贮存的要求。 本标准适用于无槽无刷永磁直流电动机（以下简称为电动机）

Slotless permanent-magnet brushless DC motor. General specification

JB/T 6316-2006 Z4系列直流电动机技术条件(机座号100-450)

本标准规定了Z4系列直流电动机的型式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期等内容。 本标准适用于由静止电力变流器供电的Z4系列直流电动机（机座号100～450）（以下简称电动机）。凡属本系列电动机所派生的各种电动机也可参照执行。

Specification for series Z4 direct current motor (frame sizes 100 ～450)

JB/T 7595-2006 ZSL4系列(IP23S)直流电动机技术条件(机座号100-160)

本标准规定了ZSL4系列（E23S）直流电动机的型式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期等内容。 本标准适用于由静止电力变流器供电的ZSL4系列（E23S）直流电动机（机座号100～160）（以下简称电动机）。凡属本系列所派生的各种电动机也可参照执行。

Specificationfor series ZSL4 (IP23S) direct current mortor (frame size 100～160)

JB/T 7592-2006 ZBL4系列(IP44)直流电动机技术条件(机座号100～180)

本标准规定了ZBL4系列直流电动机的型式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期等内容。 本标准适用于由静止电力变流器供电的ZBL4系列（IP44）直流电动机（机座号100～180）（以下简称电动机）。凡属本系列所派生的各种电动机也可参照执行。

Specification for series ZBL4 (IP44) direct current motor (frame size 100～180)

JB/T 6518-2005 轧机用大型直流电机基本技术条件

本标准规定了轧机用大型直流电机的结构型式、性能要求、试验方法、检验规则、标志和包装。 本标准适用于传动轧辊用的每个电枢大于4kW/(r/min)的直流电动机，电动机可以用静止整流电源，也可以用直流发电机组供电。本标准也适用于为其供电的1500kW以上的直流发电机。小于4kW/(r/min)的类似工况的直流电动机及其电源发电机可参照执行本技术条件。 本标准中未规定事项均应符合GB 755中的有关规定。

Fundamental technical specification of large DC machine used in rolling mill

DIN EN 61076-2-103:2005 电子设备连接器.第2-103部分:圆形连接器.一系列多极连接器的详细规范(XLR型)

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type "XLR") (IEC 61076-2-103:2004); German version EN 61076-2-103:2004

SJ 53146/1-2002 DP系列稳速直流电动机详细规范

Motors D.C.stabilized speed,series DP,detail specification for

SJ 52821/1-2002 J110SY241型永磁直流伺服电动机详细规范

Servo motor,d.c.permanent magnet,type J110SY241,detail specification for

SJ 20344/1-2002 J230LWX01型无刷直流力矩电动机.详细规范

Torque motor,brushless direct current,type J230LWX01,detail specification for

SJ 50971/7-2002 J250LYX系列永磁式直流力矩.电动机详细规范

Torque motor,d.c.permanent magnet,series J250LYX,specification for

ASTM F922-01(2011) 电动喷头的电动机寿命评估的标准试验方法

The test results provide an indication of the motor life of an electric motorized nozzle. End of motor life will be judged in accordance with Section 3.1.1 This test method covers the motorized nozzle used with household or commercial vacuum cleaner systems, that is, combination cleaners. 1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle. 1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration. 1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

ASTM F922-01(2006) 家用电动喷头的电动机寿命评估的标准试验方法

The test results provide an indication of the motor life of an electric motorized nozzle. End of motor life will be judged in accordance with Section 3.1.1 This test method covers the motorized nozzle used with household or commercial vacuum cleaner systems, that is, combination cleaners.1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle.1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration.1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle.1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

SJ 50971/6-2000 J25LYX01型永磁式直流力矩电动机详细规范

Permanent magnet d.c.torque motor,type J25LYX01,detail specification for

SJ 50971/5-2000 J250LYX01型和J250LYX02型永磁式直流力矩电动机详细规范

Torque motor,d.c.permanent magnet,Type J250LYX01 and J250LYX02,detail specification for

JB/T 9577-1999 Z系列中型直流电动机.技术条件

本标准规定了Z系列中型直流电动机的规格范围、结构型式、性能要求、试验方法和验收规则。 本标准适用于中心高为355 mm～710 mm端盖式Z系列中型直流电动机，也适用于由本系列直流电动机派生而成的其他结构型式直流电动机。本标准未规定事宜符合GB 755规定。

Technical requirements for the Z series of medium size direct current motor

JB/T 8993-1999 大型发电机寿命管理数据库.导则

本标准适用于容量300 MW及以上的汽轮发电机。对其它大容量发电机也可参照执行。

Data for large generator life management guide

JB/T 8163-1999 轧机辅传动直流电动机

本标准适用于轧机辅传动直流电动机，也适用于起重用直流电动机。本标准对底脚安装用于繁重工作的电动机规定了机械和电气方面的要求和安装尺寸。

Specification for mill auxiliary DC motors

JB/T 9617-1999 直流电机电枢绕组匝间绝缘试验规范

本规范规定了直流电机电枢绕组匝间绝缘试验方法及试验限值。 本规范适用于额定电压为110V及以上的直流电机电枢绕组匝间绝缘耐电压试验。其他直流电机除另有要求外，亦应参照使用。 本规范不适用于微型电机。

Test specification of the interture insulation on armature winding for DC machines

SJ 50971/2-1998 J250LYX12A型永磁式直流力矩电动机详细规范

Torque motor,d.c.Permanent magnet types J250LYX12A,detail specification for

SJ 50971/3-1998 J80LYX01、J130LYX11型永磁式直流力矩电动机详细规范

Torque motor,d.c.Permanent magnet types J80LYX01,J139LYX11,detail specification for