K23 直流电机 标准查询与下载

SJ 50971/4-1998 J250LYX16型永磁式直流力矩电动机详细规范

Torque motor,d.c.permanent magnet types J250LYX16,detail specification for

SJ 50971/1-1995 J320LYX03G型永磁式直流力矩电动机详细规范

Type J320LYX03G torque motors,d.c.permanent magnet,detail specification for

DIN 14685:1996 5KVA和5KVA便携式发电机

The document contains dimensions and requirements for portable generator set 5 kVA and 8 kVA.

Portable generating set 5 kVA and 8 kVA

SANS 60034-19:1995 旋转电机．第19部分：在常规和整流器供电中直流电机的特定试验方法

Applies to d.c. machines of 1 kW rated output power and above on conventional and rectifier-fed supplies except those covered by other IEC standards. Establishes methods for determining characteristic quantities for conventional and rectifier-fed d.c. ma

Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

IEC 60034-19:1995 旋转电机.第19部分:普通电源或整流电源供电直流电机的专门试验方法

Deals with specific test methods for conventional and rectifier-fed rotating d.c. machines.

Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

CSA C22.2 No.77-95-1995 电机的内过热保护.第7版.通用指令第1号.

Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to judge its suitability for his particular purpose.

Motors with Inherent Overheating Protection General Instruction No 1

ASTM F922-95 家用电动喷头的电动机寿命评估的标准试验方法

1.1 This test method covers the motorized nozzle used with household or commercial vacuum cleaner systems, that is, combination cleaners.1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle.1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration.1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle.1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

JB/T 7595-1994 ZSL4系列（IP23S）直流电动机技术条件（机座号100～160）

本标准规定了ZSL4系列(IP23S)直流电动机的型式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期等内容。 本标准适用于ZSL4系列(IP23S)直流电动机(机座号100～160)。凡属本系列所派生的各种电动机也可参照执行。

ZSL4 series (IP23S) DC motor technical conditions (frame size 100~160)

JB/T 7592-1994 ZBL4系列（IP44）直流电动机技术条件（机座号100～180）

本标准规定了ZBL4系列直流电动机的型式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期内容。 本标准适用于ZBL4系列(IP44)直流电动机(机座号100～180)。凡属本系列所派生的各种电动机也可参照执行。

Technical conditions of ZBL4 series (IP44) DC motors (frame size 100~180)

SJ 20345-1993 J110LWX01型和J110LWX01A型无刷直流力矩电动机详细规范

Brushless D.C.torque motors,Type J110LWX01 and J110LWX01A,detail specification for

JB/T 6518-1992 轧机用大型直流电机基本技术条件

　　本标准规定了轧机用大型直流电机的结构型式、性能要求、试验方法和验收规则。 　　本标准适用于传动轧辊用的每个电枢大于4kW/(r/min)的直流电动机，电动机可以用静止流电源，也可以用直流发电机组供电。本标准也适用于为其供电的1500kW以上的直流发电机。 　　本标准中未作规定者，均应符合GB 755中的有关规定。 　　注：小于4kW/(r/min)的类似工况的直流电动机及其电源发电机可参照执行本技术条件。

Basic technical specifications of large DC motors for rolling mills

JB/T 6316-1992 Z4系列直流电动机技术条件（机座号100～355）

本标准规定了Z4系列直流电动机的形式、基本参数与尺寸、技术要求、检验规则以及标志、包装和保用期等内容。 本标准适用于由静止电力变流器供电的Z4系列直流电动机(机座号100～355)。凡属本系列电动机所派生的各种电动机也可参照执行。

Technical conditions of Z4 series DC motors (frame size 100~355)

JB/T 5276-1991 小功率直流电动机 通用技术条件

General technical requirements for small power DC motors

JB/T 5335-1991 蓄电池车辆用直流电动机.基本技术条件

本标准参照采用国际电工委员会（IEC）出版物785（1984年）电动道路车辆用旋转电机。 本标准规定了蓄电池车辆用直流电动机产品的基本技术要求。 本标准适用于主牵引蓄电池供电的电动工业车辆和电动汽车用的直流电动机（牵引电动机和辅助电动机）。 若用于特殊环境条件时电动机还应符合相应标准或规程的规定。

DC motors intended to be used in battery-driven vehicles Basic technical conditions

BS 1727:1987 电瓶驱动的车辆用电机规范

Classification and performance of motors forming part of the electrical equipment of battery operated trucks, tractors and road vehicles. Rail vehicle motors are excluded.

Specification for motors for battery operated vehicles

JIS B 8036:1976 点火永磁发电机试验方法

Testing methods for ignition magnetos

JIS B 8034:1976 飞轮式永磁发电机

Flywheel magnetos