K44 高电压设备成套装置 标准查询与下载

NB/T 42043-2014 高压静止同步补偿装置

本标准规定了高压静止同步补偿装置的型号命名与产品分类、组成设备、使用条件、技术要求、试验方法、检验规则以及标志、包装、运输、贮存要求。 本标准适用于标称电压1kV以上、频率50Hz的交流电力系统中，用于提高电网稳定性、改善电能质量和功率因数的链式静止同步补偿装置(以下简称装置)。其他结构形式的装置可参考此标准执行。

High voltage static synchronous compensation installations

DL/T 1216-2013 配电网静止同步补偿装置技术规范

本标准规庵了配电 静1二同步补偿装置 (简称装置) 的产品分类、 技术要求、 试验、 检验规则、 标 志、 包装、 运输与贮存等“ 本标准适用于并联连接于频率 50Hz、 额定电压 35kv及以下交流电力系统中，用于改善配电网功率 数及电能质量的静止百步养 偿装苴。

Technical Specifications for Static Synchronous Compensation Devices for Distribution Networks

IEC 61954:2013 静止无功补偿器(SVC).晶闸管阀的试验

This International Standard defines type, production and optional tests on thyristor valves used in thyristor controlled reactors (TCR), thyristor switched reactors (TSR) and thyristor switched capacitors (TSC) forming part of static VAR compensators (SVC) for power system applications. The requirements of the standard apply both to single valve units (one phase) and to multiple valve units (several phases).

Static VAR compensators (SVC) - Testing of thyristor valves

DL/T 1182-2012 lOOOkV变电站 llOkV并联电容器装置技术规范

本标准规定了 l000kv变电站 110kV 并联电容器装置的使用条件、 性能要求、 设备配置、 试验等方 面的要求。 本标准适用于 1000kV变电站 110kV 严联电容器装置”

Technical specification of 110 kV shunt capacitor installations in 1,000 kV substations

DL/T 1183-2012 lOOOkV 非接触式验电器

本标准规定了 1000kv 非接触式验电器的技术要求、试验方法及检验规则等。 本标准适用于额定电压 1000kV 特高压交流输电线路和变电站使用的非接触式验电器。

1,000 kV non-contact electroscope

DL/T 1168-2012 高压直流输电系统保护运行评价规程

本标准规定了接入电网运行的±120kV及以上高压直流输电系统保护(以下简称“直流系统保护”)的运行评价原则和方法。本标准适用于接入电网运行的±120kV及以上直流系统保护的运行评价，±120kV以下直流系统保护参照执行。

Evaluation code of protection equipment of high-voltage direct current (HVDC) transmission system

IEEE Std C37.118.1-2011 电力系统相位同步器测量

Synchrophasor Measurements for Power Systems

ANSI/IEEE 1303:2011 静止无功补偿器现场试验指南

Guide for Static Var Compensator Field Tests

DB32/T 1702-2010 电力用户变电所运行规程

Operating procedures for power user substations

BS EN 61975:2010 高压直流(HVDC)装置.系统测试

This International Standard applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The test requirements and acceptance criteria should be agreed for back-to-back installations, while multi-terminal systems and voltage sourced converters are not included in this standard. For monopolar HVDC installations, the standard applies except for bipolar tests. For the special functions or performances that are claimed by specific projects, some extra test items not included in this standard should be added according to the technical specification requirements. This standard only serves as a guideline to system tests for high-voltage direct current (HVDC) installations. The standard gives potential users guidance, regarding how to plan commissioning activities. The tests described in the guide may not be applicable to all projects, but represent a range of possible tests which should be considered.

High-voltage direct current (HVDC) installations. System tests

DB32/T 1701-2010 高压电气装置规程

Regulations for High Voltage Electrical Installations

EN 12621:2006+A1:2010 压力下覆层材料的供应和循环用机器.安全要求

This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure - in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e. g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: pump units; pressure vessels; non-pressurised containers; interconnecting pipes and hoses flanges, nozzles, couplings, supports, lifting equipment etc.; agitators; filters; pulsation damping devices; all safety devices (e. g. level monitoring equipment); equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. This European Standard excludes: pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment. This European Standard does not apply to: machinery for processing of foodstuffs and pharmaceuticals; design and construction of pipes and hoses; design and construction of coating presses (see 3.23); machinery for the supply of powder coating material. This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN.

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

DL/T 360-2010 7.2kV～12kV预装式户外开关站运行及维护规程

本标准规定了7.2kV～12kV预装式户外开关站(以下简称户外开关站)的运行条件、操作、巡视检查、预防性试验、缺陷管理和资料管理。 本标准适用于在配电网中运行的户外开关站的运行及维护。与户外开关站结构和功能相似的其他配电设备可参考本标准。

Code of operation and maintenance for 7.2kV to 12kV outdoor prefabricated switch stations

DL/T 5242-2010 35kV～220kV变电站无功补偿装置设计技术规定

本标准规定了35kV～220kV变电站中的无功补偿装置，包括 10kv～66kV的并联电容器装置、并联电抗器装置、静止无功补偿器装置、静止无功发生器装置的工程设计。 本标准适用于35kV～220kV新建变电站，改扩建工程可参照 执行。

Technical rules for designing of reactive power compensation equipment in 35kV~220kV substations

DL/T 5426-2009 ±800kV高压直流输电系统成套设计规程

本标准规定了±800kV 高压直流输电系统设计和设备成套的工作范围、程序、技术要求和深度规定。 本标准适用于±800kV高压直流输电系统成套设计,不包括直流线路和接地极线路设计的内容。对于某些工程特殊的要求,可根据具体的功能规范在此标准的基础上进一步研究确定。 其他电压等级的直流输电工程和背靠背直流联网工程可参照本标准执行。

System design standard for ±800kV HVDC system

IEEE Std C62.21/COR 1-2008 1000V及更大电压的交流旋转电机电涌电压保护设备应用的IEEE指南

Errors identified in IEEE Std C62.21-2003 are addressed.

IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater Corrigendum 1:Correct Table 2,A.1,and A.2

NRS 039-1-2008 配电系统用防过载放电器.第1部分:无间隙金属氧化物防过载放电器应用指南

Covers the selection and application of gapless metal-oxide surge arresters for use in medium-voltage distribution systems to protect electrical equipment connected to these systems. The choice of the arrester and its application depend upon the basic i

Surge arresters for use in distribution systems Part 1: Guide for the application of gapless metal-oxide surge arresters

NRS 039-2-2008 配电系统用防过载放电器.第2部分:分布类别、无间隙金属氧化物防过载放电器

Sets out preferred requirements, for application in the Electricity Supply Industry, for the testing, supply and delivery of distribution class, non-linear metal oxide surge arresters without spark gaps, for installation in distribution types of medium v

Surge arresters for use in distribution systems Part 2: Distribution class, gapless metal-oxide surge arresters

DIN EN 50397-1:2007 交流额定电压＞1kV和≤36kV的高架电力线和相关配件用包覆导线.第1部分:包覆导线

Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 1: Covered conductors; German version EN 50397-1:2006

JB/T 10695-2007 低压无功功率动态补偿装置

本标准规定了低压无功功率动态补偿装置的术语和定义、分类与基本参数、正常使用条件、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于额定电压交流不超过1000V，频率不超过1000Hz，投切时间不大于２s的低压无功功率动态补偿装置（以下简称装置）。

Low-voltage reactive power dynamic compensation equipments