K52 发电机组 标准查询与下载

JB/T 10304-2001 工频汽油发电机组技术条件

　　本标准规定了往复式内燃(RIC)发动机、交流(a.c.)发电机、控制装置和辅助设备组成的工频汽油发电机组的技术要求、试验方法、检验规则、标志、包装及贮运要求。 　　本标准适用于额定频率为50Hz、发动机为汽油机的发电机组。 　　60Hz的机组可参照使用。

Gasoline generating sets of 50Hz technical conditions for

JB/T 10303-2001 工频柴油发电机组技术条件

　　本标准规定了往复式内燃(RIC)发动机、交流(a.c.)发电机、控制装置和辅助设备组成的工频柴油发电机组的技术要求、试验方法、检验规则、标志、包装及贮运要求。 　　本标准适用于0.5kV～3150kW、额定频率为50Hz、发动机为柴油机的发电机组。 　　60Hz的机组可参照使用。

Diesel generating sets of 50Hz technical conditions for

ARMY MIL-STD-1332 B NOTICE 2-2001 国防部移动电力发电机组的分类的公用事业用语.准确的最佳的战术定义

MIL-STD-1332B, dated 13 March 1973, is hereby reactivated and may be used for either new or existing design acquisitions.

DEFINITIONS OF TACTICAL, PRIME, PRECISE, AND UTILITY TERMINOLOGIES FOR CLASSIFICATION OF THE DOD MOBILE ELECTRIC POWER ENGINE GENERATOR SET FAMILY

DL/T 717-2000 汽轮发电机组转子中心孔检验技术导则

Technical guide for the nondestructive testing of turbine-generator rotor bores

JB/T 50134.2-1999 移动电站产品质量分等 试验方法

本标准对下列类型用内燃机为原动机的0.3～1250kW移动电站（含汽车电站、挂车电站、移动式发电机组，以下简称电站）产品质量分等规定试验方法： a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的型式）。 本标准适用于按GB/T 2819-1995《移动电站通用技术条件》生产的电站，供对其质量监督与抽查、质量等级的评定、评选优质产品和认证用。

Quality grading test method for mobile power station products

JB/T 50134.1-1999 移动电站产品质量分等 质量要求

本标准规定了下列类型用内燃机为原动机的0.3～1250kW移动电站（含汽车电站、挂车电站、移动式发电机组，以下简称电站）产品质量分等的质量要求: a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的型式）。 本标准适用于按GB/T 2819-1995《移动电站通用技术条件》生产的电站，供对其质量监督与抽查、质量等级的评定、评选优质产品和认证用。

Quality requirements for mobile power station product quality grading

JB/T 50134.3-1999 移动电站产品质量分等 判定规则

本标准对下列类型用内燃机为原动机的0.3～1250kW移动电站（含汽车电站、挂车电站、移动式发电机组，以下简称电站）产品质量分等规定判定规则： a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的型式）。 本标准适用于按GB/T 2819-1995《移动电站通用技术条件》生产的电站，供对其质量监督与抽查、质量等级的评定、评选优质产品和认证用。

Judgment rules for quality grading of mobile power station products

JB/T 8186-1999 工频柴油发电机组.额定功率、电压及转速

　　本标准规定了用柴油机驱动工频交流发电机的柴油发电机组的额定功率、额定电压和额定转速等级。 本标准适用于频率为50Hz，单相机组功率因数为0.9(滞后)或1.0，三相机组功率因数为0.8(滞后)的交流单相和三相的机组。 60Hz机组可参照使用。

Rated output、voltage and speed for diesel generating sets of 50 Hz

JB/T 1403-1999 移动电站.产品名称和型号编制规则

　　本标准规定了由内燃机驱动交流工频(50Hz)、中频(400Hz)、双频(50Hz、400Hz)和直流发电机的移动电站(含汽车电站、挂车电站、移动式发电机组)产品名称和型号的编制规则。 本标准适用于0.5～3150kW的电站。 60Hz电站可参照使用。

Compilation rules for title and model of movable power plant

JB/T 2729-1999 交流移动电站用三相四极插头插座

　　本标准规定了用内燃机驱动交流工频(50Hz)、中频(400Hz)、双频(50Hz、400Hz)发电机的内燃机电站(含汽车电站、挂车电站、发电机组，以下简称电站)用三相四极插头插座的型式、技术要求、试验方法、检验规则等。 本标准适用于额定电压不高于400V，额定频率为50Hz和400Hz的电站用三相四极插头插座。60Hz电站用插头插座可参照使用。

3 phases 4 wires plug & socket for AC movable power plant

JB/T 8182-1999 交流移动电站用控制屏.通用技术条件

　　本标准规定了用内燃机驱动交流工频(50Hz)、中频(400Hz)、双频(50Hz、400Hz)发电机的内燃机电站(含汽车电站、挂车电站、移动式发电机组、固定式发电机组)用控制屏的技术要求、试验方法、检验规则、标志及储运要求等。 本标准适用于额定电压不高于500V，额定频率不大于1200kW的电站用控制屏。 60Hz电站用控制屏可参照使用。

General technical conditions for control panel of AC movable power plant

JB/T 9583.2-1999 气体燃料发电机组.额定功率、电压及转速

　　本标准规定了燃烧气体燃料的工频交流发电机组的额定功率、额定电压和额定转速的等级。 本标准适用于频率为50Hz，单相机组功率因数为0.9(滞后)或1.0、三相机组功率因数为0.8(滞后)，燃烧天然气、沼气、发生炉煤气、城市煤气的交流单相机组。 60Hz机组可参照使用。

Rated output, voltage and speed for gas fuel generating sets

JB/T 9583.1-1999 气体燃料发电机组.通用技术条件

　　本标准规定了气体燃料发电机组的技术要求、试验方法、检验规则、标志、包装及贮运等要求。 本标准适用于0.5～800kW燃烧天然气、煤气、沼气等气体及其与柴油混合燃烧的内燃机驱动交流工频发电机的发电机组。

General technical conditions for gas fuel generating sets

BS 7698-10:1999 往复式内燃机驱动交流发电机组.用包络表面法对空气中噪音进行测定

This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528. The essential noise emission characteristic value is the sound power level. The results of measurement taken in accordance with this part of ISO 8528 are classified as either accuracy grade 2 or grade 3 depending on which acoustic measurement conditions are complied with. Accuracy grade 2 (i. e., engineering method in accordance with ISO 3744) requires the measuring area to be a substantially acoustic-free field over a reflecting plane (with an environmental correction K2A ≤ 2 dB) and with negligible background noise level (background noise correction K1A ≤1,3 dB). Accuracy grade 3 (i.e. survey method in accordance with ISO 3746) requires the environmental correction K2A to be less or equal than 7 dB, and the background noise correction K1A to be less or equal than 3 dB. For the operation of a generating set under steady conditions this part of ISO 8528 allows for the calculation of the A-weighted sound power level as well as appropriate octave or one third octave sound power level for the appropriate accuracy grade. This part of ISO 8528 applies to RIC engine driven AC generating sets for fixed and mobile applications with rigid or flexible mountings. It is applicable for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. NOTE 1 This part of ISO 8528 has been developed for RIC engine driven AC generating sets, but it can also be applied to RIC engine driven DC generating sets. NOTE 2 For some specific applications (e. g. essential hospital supplies, high rise buildings, etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis. NOTE 3 True comparisons can only be made between generating sets when the measurement are classified in the same accuracy grade.

Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method

DIN ISO 8528-9:1999 往复式内燃机驱动的交流发电机组.第9部分:机械振动的测量和评估

Reciprocating internal combustion engines driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:1995)

ISO 8528-10:1998 往复式内燃交流发电机组 第10部分:包络面法测量空气噪声

This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528. The essential noise emission characteristic value is the sound power level. The results of measurement taken in accordance with this part of ISO 8528 are classified as either accuracy grade 2 or grade 3 depending on which acoustic measurement conditions are complied with. Accuracy grade 2 (i. e., engineering method in accordance with ISO 3744) requires the measuring area to be a substantially acoustic-free field over a reflecting plane (with an environmental correction K2A≤ 2 dB) and with negligible background noise level (background noise correction K1A = 1,3dB). Accuracy grade 3 (i.e. survey method in accordance with ISO 3746) requires the environmental correction K2A to be less or equal than 7 dB, and the background noise correction K1A to be less or equal than 3 dB. For the operation of a generating set under steady conditions this part of ISO 8528 allows for the calculation of the A-weighted sound power level as well as appropriate octave or one third octave sound power level for the appropriate accuracy grade. This part of ISO 8528 applies to RIC engine driven AC generating sets for fixed and mobile applications with rigid or flexible mountings. It is applicable for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. NOTE 1 This part of ISO 8528 has been developed for RIC engine driven AC generating sets, but it can also be applied to RIC engine driven DC generating sets. NOTE 2 For some specific applications (e. g. essential hospital supplies, high rise buildings, etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis. NOTE 3 True comparisons can only be made between generating sets when the measurement are classified in the same accuracy grade.

Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method

DL/T 651-1998 氢冷发电机氢气湿度的技术要求

Requirements for hydrogen humidity of generators using hydrogen as a coolant

BS 7698-12:1998 往复式内燃机驱动交流发电设备.安全装置的应急供电

This part of ISO 8528 applies to generating sets driven by reciprocating internal-combustion (RIC) engines for emergency power supply to safety services. It applies, for example, to safety equipments in hospitals, high-rise buildings, public gathering places etc. This part of ISO 8528 establishes the special requirements for the performance, design and maintenance of power generators used in the applications referred to above and taking into account the provisions of ISO 8528-1 to ISO 8528-6 and ISO 8528-10.

Reciprocating internal combustion engine driven alternating current generating sets - Emergency power supply to safety devices

DIN ISO 8528-7:1997 往复式内燃交流发电机组.第7部分:设计规范和技术说明

The document specifies the requirements and paramters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specifics applications (for example, essential hospital supplies, high rise buildings, etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis.#,,#

Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design (ISO 8528-7:1994)

ISO 8528-12:1997 往复式内燃交流发电机组 第12部分:应急发电设备

This part of ISO 8528 applies to generating sets driven by reciprocating internal-combustion (RIC) engines for emergency power supply to safety services. It applies, for example, to safety equipments in hospitals, high-rise buildings, public gathering places etc. This part of ISO 8528 establishes the special requirements for the performance, design and maintenance of power generators used in the applications referred to above and taking into account the provisions of ISO 8528-1 to ISO 8528-6 and ISO 8528-10.

Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services