K61 工业电热设备 标准查询与下载

GB 5959.1-1986 电热设备的安全 第1部分:通用要求

本标准适用于各类工业电热设备，例如：直接电弧炉、埋弧炉、其他电弧加热设备、电渣重熔炉、等离子加热设备、感应熔炼炉、感应加热设备、电阻炉、红外辐射加热设备、高频介质加热设备、具有电子枪的电热设备、微波加热设备和激光加热设备。 本标准不适用于家用烹调和加热用电气用具、焊接设备和取暖加热系统。对电热设备的安全要求，包括适用于所有电热设备的《通用要求》和分别适用于各类电热设备的《特殊要求》。本标准只是适用于所有电热设备的《通用要求》。 这些标准不仅适用于电热设备的正常运行状态，也考虑到在误操作和设备发生故障时，能确保人身安全。

Safety in electroheat installations--Part 1: General requirements

JB/T 14461-2023 炼钢电弧炉工业节能评估技术要求

Technical requirements for industrial energy conservation assessment of steelmaking electric arc furnaces

UL 499-2021 电热器具的UL安全标准 (第十四版)

UL Standard for Safety Electric Heating Appliances (Fourteenth Edition; Reprint with Revisions Through and Including February 23@ 2017)

DIN EN IEC 60519-8:2021 电热和电磁工艺安装的安全. 第8部分: 对电渣重熔炉的特殊要求(IEC 60519-8-2020); 德文版本EN IEC 60519-8-2020

This part of IEC 60519 specifies safety requirements applicable to mainly electroheating installations for remelting and, in some cases, for refining processes of metals through direct resistance heating of a conductive slag.

Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslag remelting furnaces (IEC 60519-8:2020); German version EN IEC 60519-8:2020

DIN EN IEC 60519-1:2020 电热、电磁装置的安全性. 第1部分: 通用要求(IEC 60519-1-2020); 德文版本EN IEC 60519-1-2020

This part of IEC 60519 specifies the general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM).

Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (IEC 60519-1:2020); German version EN IEC 60519-1:2020

NB/T 10474-2020 家用和类似用途插座用塑料件

Plastic parts for sockets for household and similar purposes

DB65/T 4329-2020 商用电馕坑安全通用要求

General requirements for the safety of commercial electric pits

UL 1278-2020 可移动式和壁式或者顶吊的电房间加热器的UL安全标准 (第四版)

UL Standard for Safety Movable and Wall- or Ceiling-Hung Electric Room Heaters (Fourth Edition; Reprint with revisions through and including August 20@ 2018)

DIN EN IEC 60519-12:2018 电热和电磁加工使用装置安全. 第12部分: 红外电热的详细要求 (IEC 60519-12-2016); 德文版本 EN IEC 60519-12-2018

This part of IEC 60519 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation, usually generated by infrared emitters, is significantly dominating over heat convection or heat conduction as means of energy transfer to the material to be treated.

Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating (IEC 60519-12:2016); German version EN IEC 60519-12:2018

IEC TS 62997:2017 工业电加热和电磁处理设备.1Hz至6MHz的近场磁场引起的危害评估

This IEC technical specification specifies the characteristics of external magnetic nearfields, computations of and requirements on induced electric fields in body tissues in the frequency range from 1 Hz to 6 MHz with respect to induced electric shock phenomena, for electroheating (EH) based treatment technologies and for electromagnetic processing of materials (EPM). The phenomena include specific absorption rates with time integration. NOTE The overall safety requirements for the various types of equipment and installations for electroheating or electromagnetic processing in general result from the joint application of the General Requirements specified in IEC 60519-1:2015 and Particular Requirements covering specific types of installations or equipment. This technical specification complements the General Requirements and applies to internal frequency converters for creating high or low DC voltages, and to processing frequencies. Induced electric shock phenomena dealt with in this technical specification are caused by the alternating magnetic nearfield external to a current-carrying conductor or permeable object, inducing an electric field in a part of the body in the vicinity of the conductor. Relaxed criteria compared with the general basic restrictions for exposure apply. Simplified hazard assessment procedures apply for situations when only fingers, hands and/or extremities are in the magnetic nearfield. This technical specification does not apply to equipment within the scope of IEC 60519-9. i.e. equipment or installations for high frequency dielectric heating.

Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz

DIN EN 60519-1:2017 电热、电磁装置的安全性.第1部分:通用要求(IEC 60519-1-2015);德文版本EN 60519-1-2015

Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (IEC 60519-1:2015); German version EN 60519-1:2015

IEC 60519-12:2016 电热和电磁加工使用装置安全. 第12部分: 红外电热的详细要求

This clause of Part 1 is replaced by the following. Replacement: This part of IEC 60519 specifies safety requirements for industrial electroheating equipment and installations in which infrared radiation ?C usually generated by infrared emitters ?C is significantly dominating over heat convection or heat conduction as means of energy transfer to the workload. A further limitation of the scope is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum@ and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs. IEC 60519-1:2015 defines infrared as radiation within the frequency range between 400 THz and 300 GHz. This corresponds to a wavelength range between 780 nm and 10 ?? in vacuum. Industrial infrared heating commonly uses thermal infrared sources with rated temperatures between 500 ??and 3 000 ?? the emitted radiation from these sources dominates in the wavelength range between 780 nm and 10 ??. Since substantial emission of thermal emitters can extend either to wavelengths below 780 nm or above 3 000 nm@ the safety aspects of emitted visible light and emission at wavelengths longer than 3 000 nm are also considered in this document. This standard is not applicable to: infrared installations with lasers or light-emitting diodes (LEDs) as main sources ?C they are covered by IEC 62471:2006 and IEC 60825-1:2014; appliances for use by the general public; appliances for laboratory use ?C they are covered by IEC 61010-1:2010; electroheating installations where resistance heated bare wires@ tubes or bars are used as heating elements@ and infrared radiation is not a dominant side effect of the intended use@ covered by IEC 60519-2:2006; infrared heating equipment with a nominal combined electrical power of the infrared emitters of less than 250 W; handheld infrared equipment. Industrial infrared electroheating equipment under the scope of this standard typically uses the Joule effect for the conversion of electric energy into infrared radiation by one or several sources. Radiation is then emitted from one or several elements onto the material to be treated. Such infrared heating elements are in particular: thermal infrared emitters in the form of tubular@ plate-like or otherwise shaped ceramics with a resistive element inside; infrared quartz glass tube or halogen lamp emitters with a hot filament as a source; non insulated elements made from molybdenum disilicide@ silicon carbide@ graphite@ ironchromium- aluminium alloys@ refractory metals or comparable materials; wide-spectrum arc lamps. Object This clause of Part 1 is applicable.

Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating

ISO 13577-3:2016 工业炉及相关加工设备. 安全. 第3部分: 保护和反应性环境气体的生成和使用

Industrial furnaces and associated processing equipment - Safety - Part 3: Generation and use of protective and reactive atmosphere gases

JB/T 2379-2016 金属管状电热元件

本标准规定了对金属管状电热元件的各项要求，包括产品分类、技术要求、试验方法、检验规则及其订购和供货等。 本标准适用于按第3.1、4.1、和4.2条要求设计制造，工作电压不超过440V，以金属管作为外壳的管状电热元件。 本标准不适用于日用和类似用途的管状电热元件。 对在真空中或绝对压力超过1MPa的介质中使用以及有特殊要求的元件，除应符合本标准外还应符合相应的特殊要求的特殊要求标准。

Metal tubular electric heating elements

JB/T 12815-2016 小型熔断器 贴片式熔断体

本标准规定了贴片式熔断体的术语和定义、一般要求、标准额定值、标志、试验的一般说明、尺寸和结构、电气要求、标准规格单。 本标准适用于贴片式熔断体(以下简称熔断体)。 本标准不适用于GB/T 9364.4规定的通用模件熔断体。

Miniature fuses.Chip fuses

DIN EN 60398:2016 电热和电磁加工用装置.通用性能试验方法(IEC 60398-2015);德文版本EN 60398-2015

Installations for electroheating and electromagnetic processing - General performance test methods (IEC 60398:2015); German version EN 60398:2015

GOST R 56973-2016 电弧炉的石墨电极. 开采

Graphite electrodes for electric arc furnaces. Exploitation

ASTM A1100-16 感应热处理鉴定与控制指南

4.1 This guide helps purchasers assess induction processes including the critical parameters that can affect product quality. It guides the evaluation of heat-treating vendor performance and capabilities to ensure higher and more consistent product quality. 4.2 Refer to Appendix X1 for a flow chart for the use of this guide. 1.1 This guide covers the process control and product properties verification of continuous heat treating of material using a quench and temper induction process (surface hardening, surface heat treating, and batch heat-treated products using induction are not considered in this guide). Examples of products covered by this guide may include products covered by API Specifications 20E, 5L, and 5CT. 1.2 This guide indicates some features of induction heat treating compared to furnace heat treating. Induction heat treating processes typically operate at higher temperatures compared to furnace processes. 1.3 This guide addresses the features and requirements necessary for induction heating and ancillary equipment. However, induction equipment may be used in combination with convection heating equipment (for example, gas or electric furnaces). 1.4 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Qualification and Control of Induction Heat Treating

JB/T 12528-2015 大型可控气氛高温井式渗碳炉机组

本标准规定了对大型可控气氛高温井式渗碳炉机组的术语和定义、炉型分类和主要技术参数、技术要求、机组配套设施要求、可靠性要求、安全卫生和环境保护、试验方法、检验规则和技术分级、标志、包装、运输和贮存、订购和供货。 本标准适用于电加热大型可控气氛高温井式渗碳炉机组的设计、制造、检验和验收。

Large pit-type controlled atmosphere high temperature carburizing furnace unit

NF C79-631*NF EN 60519-1:2015 电热和电磁处理设施的安全. 第1部分: 通用要求

Safety in installations for electroheating and electromagnetic processing - Part 1 : general requirements