K81 交直流电源装置 标准查询与下载
共找到 168 条与 交直流电源装置 相关的标准，共 12 页
High-voltage direct current (HVDC) POWER transmission using voltage sourced converters (VSC)
- ICS
- 29.200;29.240.10;29.240.99
- CCS
- K81
- 发布
- 2013-07-01
- 实施
La présente partie de la CEI 62477 s'applique aux matériels et aux systèmes électroniques de conversion de puissance (SECP), à leurs composants pour la conversion de puissance électronique et la commande (ouverture et fermeture) électronique de puissance, y compris les moyens de commande, de protection, de surveillance et de mesure, ayant pour principale fonction la conversion de puissance électrique, d'une tension système assignée ne dépassant pas 1 000 V c.a. ou 1 500 V c.c.Le présent document peut également être utilisé comme norme de référence par les comités de produits qui élaborent des normes de produits applicables aux : systèmes d'entraînement élec
Safety requirements for power electronic converter systems and equipment - Part 1: general
- ICS
- 29.200;31.080.99
- CCS
- K81
- 发布
- 2013-02-02
- 实施
- 2013-02-02
IEC/TS 62578, Ed. 2: Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz
- ICS
- 29.200
- CCS
- K81
- 发布
- 2013-02
- 实施
이 표준은 정밀도 등급 0.000 1…0.1인(1 ppm…1 000 ppm)(1×10-6…
Direct-current potentiometers
- ICS
- 17.220.20
- CCS
- K81
- 发布
- 2013-01-22
- 实施
- 2013-01-22
이 표준은 저항 측정을 위한 직류 브리지에 적용한다. 브리지에 내장된 보조 장치에도 적용한
D.C. bridges for measuring resistance
- ICS
- 17.220.20
- CCS
- K81
- 发布
- 2013-01-22
- 实施
- 2013-01-22
이 표준은 고정비를 갖는 직류 저항 볼트 비율 박스에 적용되며, 최대 1.5 kV까지의 정
Direct-current resistive volt ratio boxes
- ICS
- 17.220.20
- CCS
- K81
- 发布
- 2013-01-22
- 实施
- 2013-01-22
Safety requirements for power electronic converter systems and equipment. General
- ICS
- 29.200;31.080.99
- CCS
- K81
- 发布
- 2012-10-31
- 实施
- 2012-10-31
High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) (IEC/TR 62543:2011)
- ICS
- 29.200;29.240.10
- CCS
- K81
- 发布
- 2012-06-01
- 实施
Terminal markings for valve device stacks and assemblies and for power conversion equipment
- ICS
- 29.200
- CCS
- K81
- 发布
- 2012-02-29
- 实施
- 2012-02-29
Provides a guide to the design, construction, and installation of electrical and electrical power conversion, control equipment, and systems.
AC Power Conversion Equipment and Systems
- ICS
- 29.200
- CCS
- K81
- 发布
- 2012
- 实施
Safety of power converters for use in photovoltaic power systems. Particular requirements for inverters
- ICS
- 27.160;29.200
- CCS
- K81
- 发布
- 2011-10-31
- 实施
- 2011-10-31
本指导技术文件规定胃电动汽车非车载充放电机的基本构成、基本功能、要求、试验方法、标志与标识和安装要求。本指导性技术适用于电动汽车非车载充放电机的设计、制造、检验和安装。
Electric vehicle electric energy supply and guarantee technical specification Off-vehicle charging and discharging machine
- ICS
- 29.200
- CCS
- K81
- 发布
- 2011/08/09
- 实施
- 2011/08/09
本标准规定了锂离子蓄电池充电设备接口和通讯协议的术语和定义、拓扑结构和接口、通讯协议、数据格式和状态转换。 本标准适用于由大于或等于6A•h的锂离子蓄电池组成的锂离子蓄电池模块或锂离子蓄电池总成的充电设备，也可用于镍基蓄电池及铅酸蓄电池模块和总成的充电设备以及采用电缆与蓄电池模块或总成连接，交流额定电压不超过660V、直流额定电压不超过1000V的充电设备。
Interface and communication protocol of charge equipment of lithium-ion battery
- ICS
- 29.220
- CCS
- K81
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了锂离子蓄电池充电设备的术语和定义、型号和基本参数、技术要求、试验、标志、包装、运输和贮存。 本标准适用于由大于或等于6A•h的锂离子蓄电池组成的锂离子蓄电池模块或锂离子蓄电池总成的充电设备，也可用于镍基蓄电池及铅酸蓄电池模块和总成的充电设备。 本标准适用于采用电缆与蓄电池模块或总成连接，交流额定电压不超过660 V、直流额定电压不超过1 000 V的充电设备。
General requirement of charging equipments of lithium-ion battery
- ICS
- 29.220
- CCS
- K81
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了锂离子蓄电池总成的术语和定义、分类与型号、要求、试验方法、检验、标志、包装、运输和贮存。 本标准适用于容量大于或等于6A•h的锂离子蓄电池组成的系统。
General requirement of lithium-ion battery assembly
- ICS
- 29.220
- CCS
- K81
- 发布
- 2011-05-18
- 实施
- 2011-08-01
High-voltage direct current (HVDC) transmission using voltage sourced converters (VSC)
- ICS
- 29.200;29.240.10;29.240.99
- CCS
- K81
- 发布
- 2011-03
- 实施
Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
- ICS
- 29.200
- CCS
- K81
- 发布
- 2011-03
- 实施
This part of IEC 62109 applies to the power conversion equipment (PCE) for use in Photovoltaic (PV) systems where a uniform technical level with respect to safety is necessary. This standard defines the minimum requirements for the design and manufacture of PCE for protection against electric shock, energy, fire, mechanical and other hazards. This standard provides general requirements applicable to all types of PV PCE. There are additional parts of this standard that provide specific requirements for the different types of power converters, such as Part 2 - inverters. Additional parts may be published as new products and technologies are commercialised.
Safety of power converters for use in photovoltaic power systems. Part 1: General requirements
- ICS
- 27.160
- CCS
- K81
- 发布
- 2010-08-31
- 实施
- 2010-08-31
本规范规定了电动汽车非车载充电机监控单元(以下简称充电机)与电池管理系统(Battery Management System,以下简称BMS)之间的通信协议。本规范适用于采用传导式充电方式的电动汽车用非车载充电机。
Communication protocols between off-board charger monitoring unit and battery management system for electric vehicle
- ICS
- 29.200
- CCS
- K81
- 发布
- 2010-05-24
- 实施
- 2010-10-01
本标准规定了电动汽车用非车载传导式充电机(以下简称充电机)的基本构成、功能要求、技术要求、试验方法、检验规则及标识。本标准适用于采用传导式充电方式的电动汽车用非车载充电机。
Specification for electric vehicle off-board conductive charger
- ICS
- 29.200
- CCS
- K81
- 发布
- 2010-05-24
- 实施
- 2010-10-01
