K81 交直流电源装置 标准查询与下载

NB/T 33002-2010 电动汽车交流充电桩技术条件

本标准规定了电动汽车交流充电桩(以下简称充电桩)基本构成、功能要求、技术要求、试验项目、产品资料等方面的要求。本标准适用于采用传导式充电的充电桩选型、配置和检验。

Specification for electric vehicle A.C charging point

ANSI/UL 508Cb-2010 电力转换设备安全性标准

Standard for Safety for Power Conversion Equipment

BS EN 62040-1:2008 不间断电源设备(UPS).UPS设备的一般要求和安全要求

This part of IEC 62040 applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is used with IEC 60950-1, which is referred to in this standard as "RD" (reference document). NOTE UPS applications generally make use of a chemical battery as the energy storage device. Alternative devices may be suitable, and as such, where “battery” appears in the text of this standard, where applicable, this may be understood as “energy storage device”. When a clause is referred to by the phrase "The definitions or the provisions of item/RD apply", this phrase is intended to mean that the definitions or provisions in that clause of IEC 60950-1 apply, except any which are clearly inapplicable to uninterruptible power systems. National requirements additional to those in IEC 60950-1 apply and are found as notes under relevant clauses of the RD. The primary function of the UPS covered by this standard is to ensure continuity of an alternating power source. The UPS may also serve to improve the quality of the power source by keeping it within specified characteristics. This standard is applicable to UPS which are movable, stationary, fixed or for building-in, for use in low-voltage distribution systems and intended to be installed in any operator accessible area or in restricted access locations as applicable. It specifies requirements to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for the service person. This standard is intended to ensure the safety of installed UPS, both as a single UPS unit or as a system of interconnected UPS units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. This standard does not cover UPS based on rotating machines. Electromagnetic compatibility (EMC) requirements and definitions are given in IEC 62040-2.

Uninterruptible power systems (UPS) - General and safety requirements for UPS

MT/T 334-2007 煤矿铅酸蓄电池防爆特殊型电源装置

Coal mine lead-acid battery explosion-proof special power supply device

UL 508C BULLETIN-2008 功率转换设备的UL安全标准

This bulletin announces the availability of the Outline of Investigation for Medium Voltage Power Conversion Controllers, Subject 347A

UL Standard for Safety Power Conversion Equipment

IEC PAS 62543:2008 用电压电源整流器的直流电传输

The object of this PAS is to describe the VSC transmission technology, with a particular view to the issues to be considered when it is applied at voltages above 100 kVdc, and power in excess of 100 MW. It provides information about the equipment included in a VSC transmission scheme, as well as the characteristics and performance that can be expected.

DC transmission using voltage sourced converters

DLA MIL-DTL-45068 E-2006 24伏直流电车用圆屋顶灯

This specification covers one type of dome light used in military vehicles equipped with nominal 24 volt (V) direct current (dc) electrical systems. The dome light contains a white and a blue lamp (see 6.1).

LIGHT, DOME, VEHICULAR, 24 VOLT DC

DLA A-A-59533 A-2006 交流或直流电125瓦特 5安培 总括的镕线座的表面安装

This commercial item description (CID) covers the general requirements for a surface mount, fuseholder block. Fuseholder blocks covered by this CID are intended for commercial/industrial applications

FUSEHOLDER, BLOCK, 5 AMPERE (A), 125 VOLTS (V) AC/DC, SURFACE MOUNT (SM), GENERAL REQUIREMENTS FOR

DLA A-A-59454 VALID NOTICE 1-2006 内燃机驱动恒定电流发电机交流电/直流电弧形焊接机

A-A-59454, dated 24 January 2000, has been reviewed and determined to be valid for use in acquisition.

WELDING MACHINES, ARC, AC/DC, GENERATOR, CONSTANT CURRENT, INTERNAL COMBUSTION ENGINE DRIVEN

DLA A-A-59397 VALID NOTICE 1-2006 内燃机驱动恒定电流发电机直流电弧形焊接机

A-A-59397, dated 24 January 2000, has been reviewed and determined to be valid for use in acquisition.

WELDING MACHINES, ARC, DC, GENERATOR, CONSTANT CURRENT, INTERNAL COMBUSTION ENGINE DRIVEN

UL 458-2006 陆上车辆和船用电源变换器及其系统

These requirements cover fixed and stationary power converters, power-converter systems, and accessories having a rated nominal input of 120, 120/240, or 240 V, alternating current and a nominal output of 24 V or less, direct current. These converters are intended for use within land vehicles where not directly exposed to outdoor conditions, and are intended to be employed in accordance with the National Electrical Code, NFPA 70. These requirements also cover fixed, stationary and portable power inverters and power-inverter systems having a dc input and a 120 or 240 V ac output. These inverters are intended for use within land vehicles where not directly exposed to outdoor conditions, and are intended to be employed in accordance with the National Electrical Code, NFPA 70. These requirements also cover converters/inverters that are additionally intended to charge batteries. Power converters covered by Part i of this standard are intended for connection to established 15- and 20-A branch circuits within a recreational vehicle. Power-inverters covered by Part i of this standard are intended for connection to a 12- or 24-V dc battery supply. Converters and inverters incorporating provisions for the connection of less than three line-voltage branch circuits are investigated under the requirements in Part i of this standard. A power-converter or power-inverter system is intended for direct connection to a power-supply assembly. A system for connection of three or less line-voltage branch circuits, not including the main disconnect, may optionally be evaluated in accordance with the requirements in Part ii of this standard, or with the applicable requirements for a Class CTL panelboard in the Standard for Panelboards, UL 67. Power converter systems and power inverter systems also employ circuitry as described in 1.4 and 1.5. A power-converter or power-inverter system provided with more than three line-voltage branch circuits, not including the main disconnect, is investigated to the applicable requirements for a Class CTL panelboard in the Standard for Panelboards, UL 67. Converters and inverters incorporating provisions for the connection of more than three line-voltage branch circuits are judged under the requirements in Part i of this standard and the applicable requirements for a Class CTL panelboard in accordance with the Standard for Panelboards, UL 67. Each pole of a multiple-pole circuit breaker is a separate circuit.

UL Standard for Safety Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts Fifth Edition; Reprint with revisions through and including December 14, 2007

DLA SMD-5962-02534 REV D-2006 单片硅线性微电路正极固定的2.5V低压降稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 2.5 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON

DLA SMD-5962-02535 REV D-2006 单片硅线性微电路正极固定的3.3V低压降稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.

MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 3.3 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON

ARMY MIL-PRF-32222-2006 车载间隔式加热万能燃烧器.24伏直流电.每小时输送热量15.000-30.000单位

This specification describes the performance requirements of the design, testing, manufacturing, and acceptance requirements for a forced air inlet personnel heater assembly.

HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR

DLA SMD-5962-02536 REV D-2006 单片硅线性微电路正极固定的 5V低压降稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.

MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 5 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON

KS C IEC 60634:2005 灯具热试验用热试验源(H.T.S)灯

이 규격은 대류뿐만 아니라 램프 캡을 통하여 전달된 열의 영향을 주로 조사하는 KS C

Heat test source(H.T.S.) lamps for carrying outheating tests on luminaires

DLA MS27403 VALID NOTICE 3-2005 28伏特直流起落架示位器

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

INDICATOR, POSITION, LANDING GEAR, 28 VOLT DC

BS EN 62040-1-1:2003 不间断电源系统(UPS).操作人员访问区使用的UPS的一般要求和安全要求

To be read in conjunction with BS EN 60950-1:2002

Uninterruptible power systems (UPS) - General and safety requirements for UPS used in operator access areas

BS EN 62040-1-2:2003 不间断电源系统(UPS).限制访问区使用的UPS的一般要求和安全要求

To be read in conjunction with BS EN 60950-1:2002

Uninterruptible power systems (UPS) - General and safety requirements for UPS used in restricted access locations

DLA A-A-59252 VALID NOTICE 1-2003 120伏特交流便携式电蚀器(被替代:NAVY MIL-E-3118 C 撤消通告 2,NAVY MIL-E-3118 C 有效通告 1,NAVY MIL-E-3118 C(1),NAVY MIL-E-3118 C,NAVY MIL-E-3118 B(1),NAVY MIL-E-3118 B,NAVY MIL-E-3118 A,NAVY MIL-E-3118)

A-A-59252, dated 16 June 1998, has been reviewed and determined to be valid for use in acquisition

ETCHERS, ELECTRIC, PORTABLE, 120-VOLT A.C. [Superseded: NAVY MIL-E-3118 C CANC NOTICE 2, NAVY MIL-E-3118 C VALID NOTICE 1, NAVY MIL-E-3118 C (1), NAVY MIL-E-3118 C, NAVY MIL-E-3118 B (1), NAVY MIL-E-3118 B, NAVY MIL-E-3118 A, NAVY MIL-E-3118]