K82 化学电源 标准查询与下载

BS EN 60086-1:2011 原电池.概述

This part of IEC 60086 is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. NOTE The requirements justifying the inclusion or the ongoing retention of batteries in the IEC 60086 series are given in Annex A. The object of IEC 60086-1 is to benefit primary battery users, device designers and battery manufacturers by ensuring that batteries from different manufacturers are interchangeable according to standard form, fit and function. Furthermore, to ensure compliance with the above, this part specifies standard test methods for testing primary cells and batteries.

Primary batteries. General

BS EN 60086-5:2011 原电池.水电解质电池的安全性

This part of IEC 60086 specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse.

Primary batteries. Safety of batteries with aqueous electrolyte

BS EN 60086-3:2011 原电池.手表电池

This part of IEC 60086 specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used.

Primary batteries. Watch batteries

BS EN 60086-2:2011 原电池.物理和电气规范

This part of IEC 60086 is applicable to primary batteries based on standardized electrochemical systems. It specifies − the physical dimensions, − the discharge test conditions and discharge performance requirements.

Primary batteries. Physical and electrical specifications

QB/T 2459.5-2011 碱性锌-二氧化锰电池零配件 第5部分：支撑片

本标准规定了碱性锌-二氧化锰电池支撑片的产品分类、型号命名、技术要求、检验方法、检验规则及标志、包装、运输、贮存。 本标准适用于LR20、LR14、LR6、LR03电池支撑片的生产、检测和验收。

Parts for alkaline zinc-manganese dioxide batteries.Part 5: support ring

QB/T 4173-2011 碱性锌-二氧化锰电池隔膜

本标准规定了碱性锌-二氧化锰电池隔膜的技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于电池隔膜的生产、检测和验收。

Separator for alkaline zinc-manganese dioxide batteries

QB/T 2459.1-2011 碱性锌-二氧化锰电池零配件 第1部分：正极钢壳

本标准规定了碱性锌-二氧化锰电池正极钢壳的产品分类、型号命名、技术要求、检验方法、检验规则及标志、包装、运输、贮存。 本标准适用于LR20、LR14、LR6、LR03电池钢壳的生产、检测和验收。

Parts for alkaline zinc-manganese dioxide batteries.Part 1: positive terminal steel can

QB/T 2459.2-2011 碱性锌-二氧化锰电池零配件 第2部分：负极底

本标准规定了碱性锌-二氧化锰电池负极底的产品分类、型号命名、技术要求、检验方法、检验规则及标志、包装、运输、贮存。 本标准适用于LR20、LR14、LR6、LR03电池负极底的生产、检测和验收。

Parts for alkaline zinc-manganese dioxide batteries.Part 2: Negative terminal plate

QB/T 2459.3-2011 碱性锌-二氧化锰电池零配件 第3部分：密封圈

本标准规定了碱性锌-二氧化锰电池密封圈的产品分类、型号命名、技术要求、检验方法、检验规则及标志、包装、运输、贮存。 本标准适用于LR20、LR14、LR6、LR03电池密封圈的生产、检测和验收。

Parts for alkaline zinc-manganese dioxide batteries.Part 3: sealing grommet

QB/T 2459.4-2011 碱性锌-二氧化锰电池零配件 第4部分：集流体

本标准规定了碱性锌-二氧化锰电池集流体的产品分类、型号命名、技术要求、检验方法、检验规则及标志、包装、运输、贮存。 本标准适用于LR20、LR14、LR6、LR03电池集流体的生产、检测和验收。

Parts for alkaline zinc-manganese dioxide batteries.Part 4: current collector

DB11/Z 800-2011 电动汽车电能供给与保障技术规范 商用车动力蓄电池包

本指导性技术文件规定了纯电动商用车和插电式电动商用车动力蓄电池包的要求、试验方法、标识与标志、包装、运输与储存的要求。本指导性技术文件适用于纯电动商用车和插电式电动商用车动力蓄电池包的设计、生产、检验以及包装、运输与储存。

Electric vehicle electric energy supply and guarantee technical specification commercial vehicle traction battery pack

IEC PAS 62282-6-150:2011 燃料电池技术 第6-150部分 微型燃料电池动力系统 安全性 间接式PEM燃料电池内水活性(UN分4.3)化合物

Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN devision 4.3) compounds in indirect PEM fuell cells

JIS C 8826:2011 网状互连的小聚合物电解液燃料电池动力系统的功率调节器用测试方法

Testing methods of power conditioner for grid interconnected small fuel cell power systems

DIN IEC/TS 62282-1:2011 燃料电池技术.第1部分:术语(IEC/TS 62282-1-2010)

Fuel cell technologies - Part 1: Terminology (IEC/TS 62282-1:2010)

IEC 60086-5:2011 原电池组.第5部分:电解质为水溶液的电池组的安全性

Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60086-2:2011 原电池.第2部分:物理和电气规格

This part of IEC 60086 is applicable to primary batteries based on standardized electrochemical systems. It specifies ?C the physical dimensions@ ?C the discharge test conditions and discharge performance requirements.

Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-1:2011 原电池.第1部分:总则

Primary batteries - Part 1: General

JIS C 8515:2011 原电池.物理和电器规范

Primary batteries -- Physical and electrical specifications

ASTM D7606-11 高压氢气和相关燃料电池原料气取样的标准操作规程

nbsp;nbsp;nbsp;Hydrogen is delivered to fuel cell powered automotive vehicles and stationary appliances at pressures up to 87.5 MPa. The quality of hydrogen delivered is a significant factor in maximizing fuel cell efficiency and life span. Contamination can arise during the production of fuel cell feed gases, storage containers, station tubing and fuel lines up to the nozzle used for fuel delivery. Collection of a representative fuel sample without the introduction of contamination even as low as parts-per-billion (ppb) per contaminant during collection is crucial for assessing the quality of fuel in real world applications. This practice is intended for application to high pressure, high purity hydrogen; however, the apparatus design and sampling techniques may be applicable to collection of other fuel cell supply gases. Many of the techniques used in this practice can be applied to lower pressure/lower purity gas streams.1.1 This practice describes a hydrogen quality sampling apparatus (HQSA) and a procedure for the sampling of high pressure hydrogen at fueling nozzles of 35 or 70 Mega Pascal (MPa) fueling stations. 1.2 This practice does not include the analysis of the acquired sample. Applicable ASTM standards include but are not limited to test methods referenced in Section 2 of this practice. 1.3 This practice is not intended for sampling and measuring particulate matter in high pressure hydrogen. For procedures on sampling and measuring particulate matter see ASTM D7650 and D7651. 1.4 The values stated in SI units are standard. The values stated in inch-pounds are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

QB/T 4080-2010 ZR6型碱性锌-羟基氧化镍电池

本标准规定了ZR6型碱性锌-羟基氧化镍的电池的术语和定义、型号命名、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于供数码相机、便携式音视频产品、电子器具、仪器仪表等电器具作电源的ZR6型碱性锌-羟基氧化镍电池的生产、检测和验收。

ZR6 alkaline zinc nickel oxy-hydroxide battery