L25 继电器、斩波器 标准查询与下载

DLA MS25455 REV H-2003 I型2 PDT,5安培火箭安装磁力锁密封电磁继电器

Socket pin terminals shall provide the operational, environmental, and interface characteristics to provide a reliable interconnect to gold-plated contacts. Terminals shall be gold plated. One system for gold plating that may be used is ASTM B488, type 3, class 1.25 with a nickel underplate of 50 to 150 microinches thick. The gold plating system shall enable the product to meet the performance requirements of this specification and shall be approved by the qualifying activity.

RELAYS, ELECTROMAGNETIC, 5 AMPERES, 2 PDT, TYPE I, MAGNETIC LATCH, SOCKET MOUNTED HERMETICALLY SEALED

NF C45-330:2002 带强力导向触点(机械链接)的继电器

Relays with forcibly guided (mechanically linked) contacts.

DIN EN 61811-51:2002 机电式有或无继电器.第51部分:空白详细规范:经质量评估的机电式有或无电信继电器.非标准化型和结构 (IEC 61811-51:2002); 德文版本 EN 61811-51:2002

Electromechanical all-or-nothing relays - Part 51: Blank detail specification; Electromechanical all-or-nothing telecom relays of assessed quality; Non-standardized types and construction (IEC 61811-51:2002); German version EN 61811-51:2002

DIN EN 61811-50:2002 机电式有或无继电器.第50部分:分规范:经质量评估的机电式有或无电信继电器 (IEC 61811-50:2002); 德文版本 EN 61811-50:2002

This standard selects from IEC 61810-7 and other sources the appropriate methods of test to be used in detail specifications derived from this specification, and contains basic test schedules to be used in the preparation of such specifications. Detailed test schedules are contained in the blank detail specifications supplementary to this specification.#,,#

Electromechanical all-or-nothing relays - Part 50: Sectional specification; Electromechanical all-or-nothing telecom relays of assessed quality (IEC 61811-50:2002); German version EN 61811-50:2002

DIN EN 61811-52:2002 机电式全或无继电器.第52部分:经评估质量的两组转换触点的20 mm x 10 mm base底座的机电式全或无电信继电器

This standard selects from IEC 61810-7 and other sources the appropriate methods of test to be used in detail specifications derived from this specification, and contains basic test schedules to be used in the preparation of such specifications in accordance with IEC 61811-1.#,,#

Electromechanical all-or-nothing relays - Part 52: Blank detail specification; Electromechanical all-or-nothing telecom relays of assessed quality; Two change-over contacts, 20 mm x 10 mm base (IEC 61811-52:2002); German version EN 61811-52:2002

SJ 51042/3-2002 JQX-40M型.小型大功率密封直流电磁继电器.详细规范

Detail specification for model JQX-40M,miniature,high power,hermetically sealed,d.c.,electromagnetic relays

SJ 20834-2002 气体和液体流量继电器总规范

Relays,air and liquid flow,general specification for

SJ 51042/2-2002 JMW-3M微型中功率密封磁保持继电器.详细规范

Detail specification for model JMW-3M,micro-miniature,Intermediate power,hermetically sealed,magnetic-latching relays

SJ 50065/10-2002 JRW-222M型有可靠性指标的TO-5密封直流电磁继电器详细规范

Detail specification for model JRW-222M,TO-5,hermetically sealed,d.c.electromagnetic relays,established reliability

SJ 51515/4-2002 JGX-0602M型密封直流固体继电器.详细规范

Relays,d.c.solid state,hermetically sealed,model JGX-0602M,detail specification for

SJ 50065/11-2002 JRW-110M型有可靠性指标的TO-5密封直流电磁继电器详细规范

Detail specification for model JRW-110M,TO-5,hermetically sealed,d.c.electromagnetic relays,established reliability

SJ 51515/5-2002 JGC-1MA型密封直流固体继电器.详细规范

Relays,d.c.solid state,hermetically sealed,model JGC-1MA,detail specification for

BS EN 60255-22-4:2002 电气继电器.测量继电器和保护设备的电气干扰试验.电器快速瞬间/短促消隐脉冲试验

This part of IEC 60255 is based on IEC 61000-4-4, referring to that publication where applicable, and specifies the general requirements for electrical fast transient immunity tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with these systems. The objective of the tests is to confirm that the equipment under test will operate correctly when energized and subjected to repetitive fast transients (bursts) such as those originating from interrupting of inductive loads, relay contact bounce, etc. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only.

Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test

BS EN 60255-22-5:2002 继电器.量值继电器和保护设备的的电干扰试验.抗浪涌干扰试验

This standard is based on IEC 61000-4-5, referring to that publication where applicable, and specifies the general requirements for surge tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems. The objective of the tests is to confirm that the equipment under test will operate correctly when energized and subjected to high-energy disturbances on the power and interconnection lines, caused by surge voltages from switching and lightning effects. This standard does not intend to test the capability of the insulation to withstand high-voltage stress. The insulation test is covered by IEC 60255-5. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only.

Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Surge immunity test

KS C IEC 60255-21-2:2002 继电器.第21部分:测量继电器和保护设备上的振动、冲击、碰撞和地震试验.第2节:冲击和碰撞试验

이 국제 규격은 출력 접점 존재 여부와 관계없이 유도형 및 정지형 보호 계전기 및 보호 기

Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section Two：Shock and bump tests

KS C IEC 60255-21-1:2002 继电器.第21部分:测量继电器和保护设备上的振动、冲击、碰撞和地震试验.第1节:振动试验(正弦波)

이 국제 규격은 보호 계전기와 보호 기기에 적용할 수 있는 진동, 충격, 충돌, 지진 요구

Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section One：Vibration test(sinusoidal)

DLA MIL-PRF-32085 (1)-2002 高性能最佳性直流27瓦特电磁继电器 常规

This amendment forms a part of MIL-PRF-32085 dated 16 July 2001, and is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, ELECTROMAGNETIC, 270 V DC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA MIL-PRF-28750 D (3)-2002 密封固态继电器 常规

This amendment forms a part of MIL-PRF-28750D dated 1 February 1999, and is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, SOLID-STATE, SEALED, GENERAL SPECIFICATION FOR

IEC 60255-22-4:2002 电气继电器.第22-4部分:量度继电器和保护装置的电气骚扰试验.快速瞬变/猝发骚扰试验

This part of IEC 60255 is based on IEC 61000-4-4, referring to that publication where applicable, and specifies the general requirements for electrical fast transient immunity tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with these systems. The objective of the tests is to confirm that the equipment under test will operate correctly when energized and subjected to repetitive fast transients (bursts) such as those originating from interrupting of inductive loads, relay contact bounce, etc. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only. The object of this standard is to state: · definitions of terms used; · test severity level; · test equipment; · test set-up; · test procedures; · criteria for acceptance; · test report requirements.

Electrical relays - Part 22-4: Electrical disturbance tests for measuring relays and protection equipment; Electrical fast transient/burst immunity test

IEC 60255-22-5:2002 继电器.第22-5部分:测量继电器和保护设备的电干扰试验.电流浪涌免疫性试验

This standard is based on IEC 61000-4-5, referring to that publication where applicable, and specifies the general requirements for surge tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems. The objective of the tests is to confirm that the equipment under test will operate correctly when energized and subjected to high-energy disturbances on the power and interconnection lines, caused by surge voltages from switching and lightning effects. This standard does not intend to test the capability of the insulation to withstand high-voltage stress. The insulation test is covered by IEC 60255-5. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only. The object of this standard is to define the: · terms used; · test severity levels; · test equipment; · test set-up; · test procedures; · criteria for acceptance; · test report.

Electrical relays - Part 22-5: Electrical disturbance tests for measuring relays and protection equipment; Surge immunity test