L25 继电器、斩波器 标准查询与下载

DLA MIL-R-83407 B-2003 水银池簧片继电器的一般规定

This specification establishes the general requirements for mercury wetted reed relays that perform the switching functions associated with ground control support equipment. These relays are not be used in shipboard or airborne applications.

RELAYS, REED (MERCURY WETTED), GENERAL SPECIFICATION FOR

NF C45-205-7:2003 继电器.第22-7部分:测量继电器和保护装置的电气干扰试验.电源频率抗扰试验

Electrical relays - Part 22-7 : electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests.

IEC 61810-1:2003 机电式元件继电器.第1部分:一般要求和安全要求

Electromechanical elementary relays - Part 1: General and safety requirements

DIN EN 61811-11:2003 经质量评定的机电式单元继电器.第11部分:空白详细规范.工业用继电器

This part of IEC 61811 is a blank detail sepcification applicable to electromechanical elementary (non-specified time all-or-nothing) relays of assessed quality for industrial application. It is based on the generic specification IEC 61811-1 and the sectional specification IEC 61811-10 and selects from from IEC 61810-7 the appropriate test and measurement procedures to be used in detail specifications derived from this specification. Moreover it contains a basic test schedule to be used in the preparation of such specifications.

Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification; Relays for industrial application (IEC 61811-11:2002); German version EN 61811-11:2003

DIN EN 61811-10:2003 经质量评定的机电式单元继电器.第10部分:分规范.工业用继电器

This part of IEC 61811 is a sectional specification applicable to electromechanical elementary (non-specified time all-or-nothing) relays of assessed quality for industrial application.

Electromechanical elementary relays of assessed quality - Part 10: Sectional specification; Relays for industrial application (IEC 61811-10:2002); German version EN 61811-10:2003

DLA MIL-PRF-6106 L (5)-2003 电磁继电器的一般规格

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR

DLA MS24166 REV J (1)-2003 非密封II型 1 PST(N.O.)50安培电磁继电器

This amendment forms a part of MS24166J, dated 15 April 2003, and is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST, (N.O.), TYPE II, NONHERMETICALLY SEALED

DLA MS24187 REV N (1)-2003 非密封II型 1 PST(N.O.)50/25 安培电磁继电器

This amendment forms a part of MS24187N, dated 15 April 2003, and is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, ELECTROMAGNETIC, 50/25 AMPERES, 1 PDT (N.O./N.C.), TYPE II, NON-HERMETICALLY SEALED

KS C IEC 60255-8:2003 继电器.第8部分:热敏继电器

이 규격은 보호 장비에 흐르는 전류의 측정으로 인한 전기적 열 손상으로부터 장비를 보호하기

Electrical relays-Part 8:Thermal electrical relays

DLA MS24183 REV L-2003 非密封I型 1 PST(N.O.)200安培电磁继电器

This specification is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED [Superseded: DLA MS25033 REV C CANC NOTICE 1, DLA MS25033 REV C (1), DLA MS25033 REV C, DLA MS25033 REV B VALID NOTICE 1, DLA MS25033 REV B, DLA MS25033 REV A, DLA MS2

DLA MS24179 REV N-2003 非密封III型 1 PST(N.O.)400安培电磁继电器

The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106.

RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N.O.), TYPE III, NON-HERMETICALLY SEALED

DLA MS24182 REV L-2003 非密封I型 1 PST(N.O.)100安培电磁继电器

Dimensions are in inches. Metric equivalents are given for general information only. Unless otherwise specified, tolerance is ±.031 (0.79 mm). This specification sheet takes precedence over documents referenced herein. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation form a part of this document to the extent specified herein. Coil and auxiliary terminals may use an additional flat washer for terminal seat. Cadmium or cadmium compounds are prohibited on external hardware. A transition period to non-cadmium hardware is authorized for up to 1 year from the date of this revision. Spring washer on drawing is a spring lock washer.

RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED

DLA MS24149 REV E-2003 密封I型 2 PDT 10安培电磁继电器

Dimensions are in inches. Metric equivalents are given for general information only.Unless otherwise specified, tolerance is ±.010 (0.25 MM).

RELAYS, ELECTROMAGNETIC, 2 PDT, 10 AMPERES, TYPE I, HERMETICALLY SEALED

DLA MS24142 REV N-2003 密封I型 1 PST(N.O.)200安培电磁继电器

This specification is approved for use by all Departments and Agencies of the Department of Defense.

RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED

DLA MS24152 REV J-2003 密封II型 3 PDT 25安培电磁继电器

Metric equivalents are given for general information only.

RELAYS, ELECTROMAGNETIC, 3 PDT, 25 AMPERES, TYPE II, NONHERMETICALLY SEALED (MECHANICALLY INTERLOCKED)

DLA MS24166 REV J-2003 非密封II型 1 PST(N.O.)50安培电磁继电器

This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106.

RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST, (N.O.), TYPE II, NONHERMETICALLY SEALED

DLA MIL-PRF-83536 B-2003 低于或等于25安培,可靠性指标的电磁继电器的一般规定

Scope. This specification covers the general requirements for electromagnetic, hermetically sealed relays for use in aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 25 amperes alternating current (ac) or direct current (dc). Specification sheets (see 3.1) specifying requirements for 25 ampere relays are for relays that have a maximum load rating of 25 amperes for resistive load only. All other load ratings (motor, inductive, lamp) are less than 25 amperes. The failure rate (FR) level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under the rated load conditions specified herein. For application and caution information, see 6.1.

RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR

DLA MS24185 REV M-2003 非密封II型 1 PST(N.O.)400安培电磁继电器

This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106.

RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N.O.), TYPE II, NONHERMETICALLY SEALED

DLA MS24141 REV K-2003 密封I型 1 PST(N.O.)100安培电磁继电器

The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106.

RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED

DLA MIL-PRF-83536 B SUPP 1-2003 低于或等于25安培,可靠性指标的电磁继电器的一般规定

This supplement forms a part of MIL-PRF-83536B, dated 15 April 2003.

RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR