L31 电声器件 标准查询与下载

BS EN 62489-2:2011 电声学.助听用音频感应环系统.用于评估人体照射限值指南符合性的,环发射低频磁场的计算和测量方法

This part of IEC 62489 applies to audio-frequency induction-loop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. The standard is intended for assessment of human exposure to low-frequency magnetic fields produced by the system, by calculation and by in-situ testing. This standard does not deal with other aspects of safety, for which IEC 60065 applies, or with EMC.

Electroacoustics. Audio-frequency induction loop systems for assisted hearing. Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure

BS DD IEC/TS 60318-7:2011 电声学.人的头和耳模拟器.助听器测量用头戴筒式模拟器

Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of hearing aids

NF C97-618-4*NF EN 60318-4:2011 电声学.人头和耳朵模拟器.第4部分:利用耳塞插入耳部耦合的耳机测量用耳塞咬合模拟器

Electroacoustics - Simulators of human head and ear - Part 4 : occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts.

IEC 60118-13:2011 电声学.助听器.第13部分:电磁兼容性(EMC)

"This part of IEC 60118 in principle covers all relevant EMC phenomena for hearing aids. EMC phenomena@ such as RF emission and electrostatic discharge@ are not currently known to be a significant problem in connection with hearing aids and are therefore not dealt with. Based on new knowledge@ they could be considered in connection with future revisions or extensions of this standard. Hearing aid immunity to high frequency electromagnetic fields originating from digital wireless devices operating in the frequency ranges 0@8 GHz to 0@96 GHz and 1@4 GHz to 2@48 GHz is currently identified as the only relevant EMC phenomenon regarding hearing aids. Future editions of this part of IEC 60118 may add tests for other frequency bands@ as they come into more common use. IEC 61000-4-3 is the basis for relevant EMC tests to be conducted on hearing aids. Measurement methods and acceptance levels are described in this part of IEC 60118. For the purpose of this part of IEC 60118@ two immunity classes of hearing aids are defined (see 3.1) related to their use. ""Bystander compatible"" ensures that a hearing aid is usable in environments where digital wireless devices are in operation in the proximity of the hearing aid wearer. ""User compatible"" hearing aids ensures that a hearing aid is usable when the wearer is using a digital wireless device at the wearer's own aided ear. Measurement methods for hearing aids with non-acoustic outputs and for hearing aids connected to other equipment by cables are not given in this standard."

Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC)

IEC TS 60318-7:2011 电声学.人类头部和耳朵的模拟器.第7部分:助听器测量用听觉的头部和躯干模拟器

Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for acoustic for the measurements of hearing aids

IEC 62489-2:2011 电声学.助听用音频电磁感应环路系统.第2部分:人暴露于辐射限值的评价一致性指南用环路低频电磁辐射的计算方法和测量

This part of IEC 62489 applies to audio-frequency induction-loop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. The standard is intended for assessment of human exposure to low-frequency magnetic fields produced by the system, by calculation and by in-situ testing. This standard does not deal with other aspects of safety, for which IEC 60065 applies, or with EMC.

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure

DIN EN 60318-4:2010 电声学.人的头和耳模拟器.第4部分:用耳塞耦合到人耳的耳机测量用塞耳模拟器(IEC 60318-4-2010);德文版本EN 60318-4-2010

Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts (IEC 60318-4:2010); German version EN 60318-4:2010

NF S99-800:2010 助听器专业人员提供的服务.

Services offered by hearing aid professionals.

DIN EN 62489-1:2010 电声学.助听用音频电磁感应环路系统.第1部分:系统组件性能的具体说明及测量方法(IEC 62489-1-2010).德文版本EN 62489-1-2010

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (IEC 62489-1:2010); German version EN 62489-1:2010

BS EN 15927:2010 助听器专业人员提供的服务

This European Standard applies to the services offered by hearing aid professionals in their efforts to provide benefit for their clients. This European Standard specifies the process of hearing aid provision from the first client contact to the long term follow-up. This European Standard also defines requirements for education, facilities, equipment and code of conduct. A quality management system with the overall objective of securing client satisfaction and covering the elements of the service is also an essential part of the requirements. This European Standard centres on the services offered to the majority of clients with hearing impairment. Certain groups of hearing impaired such as children, persons with other disabilities or persons with implantable devices may require services beyond what is covered in this European Standard.

Services offered by hearing aid professionals

BS EN 60318-4:2010 电声学.人头和耳模拟器.利用耳内插入物的咬合型耳模拟器测量耳机对耳朵耦合性

This part of IEC 60318 describes an occluded-ear simulator intended for the measurement of insert earphones in the frequency range from 100 Hz to 10 000 Hz. It is suitable for air conduction hearing aids and earphones, coupled to the ear by means of ear inserts e.g. ear moulds or similar devices. The occluded-ear simulator is also suitable as the basis for an extension intended to simulate the complete ear canal and the outer ear (for instance in head simulators). The occluded-ear simulator simulates the acoustic transfer impedance for the occluded normal adult human ear. However, it does not simulate the leakage between an earmould and a human ear canal; therefore, the results obtained with the occluded-ear simulator may deviate from the performance of an insert earphone on a real ear, especially at low frequencies. Moreover, large performance variations among individual ears will occur which should be considered when using the ear simulator. Above 10 kHz the device does not simulate a human ear, but can be used as an acoustic coupler at additional frequencies up to 16 kHz. Below 100 Hz, the device has not been verified to simulate a human ear, but can be used as an acoustic coupler at additional frequencies down to 20 Hz.

Electroacoustics - Simulators of human head and ear - Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts

DIN EN 60318-1:2010 电声学. 人脑和耳朵模拟器. 第1部分: 耳挂式和罩耳式耳机测量用耳朵模拟器（IEC 60318-1: 2009）; 德文版本EN 60318-1: 2009

Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones (IEC 60318-1:2009); German version EN 60318-1:2009

IEC 62537:2010 基于IEC 60958的带有数字输入信号的扩音器接口

This International Standard specifies the requirements for a digital loudspeaker interface based on the IEC 60958 series of standards and the MIDI specification. It maximizes flexibility and value by combining these previously separate standards. Together, the two standards provide a simple and flexible digital interface for loudspeakers. Examples for applications of the interface can be found in Annex C of this standard.

Interface for loudspeakers with digital input signals based on IEC 60958

BS EN 62489-1:2010 电声学.助听用音频电磁感应环路系统.系统组件性能的具体说明及测量方法

This part of the IEC 62489 series applies to the components of audio-frequency inductionloop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. This standard is intended to encourage accurate and uniform presentation of manufacturers' specifications, which can be verified by standardized methods of measurement. It is intended for type testing. The components considered are the following: – amplifiers; – microphones; – other components, such as playback equipment. This standard does not deal with safety, for which IEC 60065 applies. It also does not deal with EMC (Electromagnetic compatibility) and EMF (Electromagnetic fields, in the context of human exposure).

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Methods of measuring and specifying the performance of system components

IEC 29/716/DTS:2010 IEC/TS 60318-7:电声学.人类头部和耳朵的模拟.第7部分:空气传导助听器的声学测量用头部和躯干模拟器

IEC/TS 60318-7: Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for acoustic measurements of air-conduction hearing aids

BS EN 62080:2009 家用和类似用途用声音信号装置

This International Standard applies to sound signalling devices with integral enclosures or to sound signalling devices intended to be fitted into or supplied with enclosures according to IEC 60670 intended for household and similar purposes with rated voltages not exceeding 250 V a.c. or 250 V d.c. and with rated power inputs not exceeding 100 VA. In these sound signalling devices an indicating light having a rated input power not exceeding 10 VA may also be incorporated. These products are designated as "devices" throughout the remainder of the text. This standard applies to fixed, portable and plug-in devices for indoor or outdoor use.

Sound signalling devices for household and similar purposes

BS EN 60318-1:2009 电声学.人头和耳模拟器.超级听力和头戴护耳式耳机的测量用耳模拟器

This part of IEC 60318 specifies an ear simulator for the measurement of supra-aural and circumaural earphones (used for example in audiometry and telephonometry) applied to the ear without acoustical leakage, in the frequency range from 20 Hz to 10 kHz. The same device can be used as an acoustic coupler at additional frequencies up to 16 kHz.

Electroacoustics - Simulators of human head and ear - Ear simulator for the measurement of supra-aural and circumaural earphones

BS EN 60645-6:2010 电声学.听力测定设备.听觉发射的测量仪器

This part of IEC 60645 applies to instruments designed primarily for the measurement of otoacoustic emissions in the human external acoustic meatus evoked by acoustic probe pulses or tones. This standard defines the characteristics to be specified by the manufacturer, lays down performance specifications for two types of instruments 1 and specifies the functions to be provided on these types. This part of IEC 60645 describes methods of test to be used for approval testing and guidance on methods for undertaking routine calibration. The purpose of this part of IEC 60645 is to ensure that measurements made under comparable test conditions with different instruments complying with the standard will be consistent. Instruments which provide a measurement function not specifically within the scope of the standard shall still comply with any relevant requirements. This standard is not intended to restrict development or incorporation of new features, nor to discourage innovative approaches.

Electroacoustics. Audiometric equipment. Instruments for the measurement of otoacoustic emissions

IEC 62489-1:2010 电声学.助听用音频电磁感应环路系统.第1部分:系统组件性能的具体说明及测量方法

This part of the IEC 62489 series applies to the components of audio-frequency inductionloop systems for assisted hearing. It may also be applied to such systems used for other purposes@ as far as it is applicable. This standard is intended to encourage accurate and uniform presentation of manufacturers' specifications@ which can be verified by standardized methods of measurement. It is intended for type testing. The components considered are the following: ?C amplifiers; ?C microphones; ?C other components@ such as playback equipment. This standard does not deal with safety@ for which IEC 60065 applies. It also does not deal with EMC (Electromagnetic compatibility) and EMF (Electromagnetic fields@ in the context of human exposure).

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components

IEC 60318-4:2010 电声学 人的头部和耳朵模拟器 第4部分 借助耳塞连接耳朵的耳机测量用塞耳模拟器

Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts