L63 计算机外围设备 标准查询与下载

ASTM F1174-01(2006) 个人计算机打印机的检测仪使用的标准规程

This practice is intended to provide a means of evaluation of comparative image quality relative to paper, imaging system components, printer speeds, and printer models.1.1 This practice covers a standardized procedure utilizing a printer of the type normally associated with a personal computer as an imaging device when the performance properties of paper and imaging system components are measured. Both impact and nonimpact systems may be tested.1.2 Impact printer technologies include full character and dot matrix.1.3 Nonimpact printer technologies include laser printers, direct thermal printers, thermal transfer printers, and ink jet.1.4 Printers not included are those associated with large computer systems commonly known as high-speed printers. See Practice F 1175 for testing involving those systems.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Using a Personal Computer Printer as a Test Instrument

JIS B 3402:2000 机械工程的计算机辅助设计（CAD ）制图实施规程

この規格は，主として機械工業の分野においてCADによって行ぅ製図（以下，CAD製図という。）について規定する。

Drawing practices for mechanical engineering by CAD

IEC 61966-5:2000 多媒体系统与设备 色彩测量和管理 第5部分:使用等离子显示屏的设备

A series of methods and parameters for colour measurements and management for use in multimedia systems and equipment is applicable to the assessment of colour production and reproduction. This part of IEC 61966 deals with equipment using plasma display panels (PDP) to display colour images for use in multimedia applications. The methods of measurement standardized in this part of IEC 61966 are designed to make possible the objective performance assessment and characterization of colour reproduction of PDP displays which accept red - green - blue analogue or digital signals from electrical input terminals and output colour images on PDP display screens. For PDP displays to which analogue signals are applicable, the corresponding digital signals are taken into account. The measured results are intended to be used for the purpose of equipment specific colour control in order to attain colour management in open multimedia systems. This part of IEC 61966 defines input test signals, measurement conditions, methods of measurement and reporting of the measured data, so as to make possible the colour management and comprehensive comparison of the results of measurements. Colour control within equipment is outside the scope of this part of IEC 61966. It does not specify limiting values for various parameters.

Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels

DIN ISO/IEC 14473:2000 信息技术.办公室设备.规定图像扫描器的最少信息

Information technology - Office equipment - Minimum information to be specified for image scanners (ISO/IEC 14473:1998)

ASTM F2035-00(2011) 喷墨打印墨水稳定性测量标准规程

Dark stability of printed ink jet media for specified periods of time is pertinent to the end use of these materials. While natural aging is the most reliable method of assessing image stability, the length of time required makes this practice impractical for most materials. As a result, accelerated tests often are used. This practice is an accelerated short-term storage practice that simulates long-term storage but at elevated temperature. It provides faster results and is intended to identify problems that may occur over extended time periods. A room condition sample also is tracked to provide practical data. Because testing is done at a single set of conditions, it is not intended to be a long-term predictor as achieved through Arrhenius testing. Note 28212;The results from single accelerated tests can lead to inaccurate results. This procedure should be used only for early-screening information in side-by-side comparisons only. Arrhenius testing, which is based on mathematical extrapolation of a series of high temperature tests to room temperature, is a better predictor of a product's stability. Since the ability of an ink jet print to withstand color changes is a function of temperature and humidity, it is important that dark stability be assessed under the conditions appropriate to the end use application. While ink jet prints may be handled and displayed under a variety of conditions, this test practice is intended to produce the color changes that may occur in ink jet prints upon dark exposure in typical office environments. The accelerated procedure described in this test practice is intended to provide a means for the rapid evaluation of dark stability under laboratory conditions. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development. Color changes are not a linear function of duration of incubation. The preferred method of determining dark stability is to incubate the prints for a number of intervals, and to assess the exposure time required to obtain a specific color difference.1.1 This practice describes an accelerated procedure intended to determine the dark stability of ink jet prints. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Measuring the Dark Stability of Ink Jet Prints

ISO/IEC 15411:1999 信息技术 分开的键盘布局

This International Standard defines the differing requirements necessary when considering the various types of segmented keyboards. The scope of this International Standard encompasses the three-dimensional layout of segmented, traditional style keyboards classified as having: a. Adjustable alphanumeric segments; b. Fixed angle alphanumeric segments. This International Standard covers the following keyboard areas: - Alphanumeric area - Function area - Text editing area - Numeric area - Cursor control area

Information technology - Segmented keyboard layouts

BS ISO/IEC 13238-3:1999 信息技术.数据管理.IRDS输出/输入设备

This part of ISO/IEC 13238 enables the bulk transfer of all or part of the data contained in an Information Resource Dictionary (IRD) or in an Information Resource Dictionary Definition conforming to ISO/IEC 10728:1993 IRDS Services Interface. This part of ISO/IEC 13238 defines a format for such a transfer and also services to generate the export file and services to import the file. These services are additional to the existing services defined in the IRDS Services Interface. This version of this part of ISO/IEC 13238 defines a limited set of Export and Import services. It is expected that implementations will also provide more sophisticated services based on the use of the Transfer File structure defined in this part of ISO/IEC 13238. The physical way in which the transfer takes place is outside the scope of this part of ISO/IEC 13238. Each transfer may be effected in one of several ways including the physical transfer of the data using a transportable storage device.

Information technology - Data management - IRDS export/import facility

ANSI/ISO/IEC 10561:1999 信息技术.办公设备.打印机.被INCITS采用的1类和2类打印机生产量测量方法

This International Standard specifies a method for measuring the throughput of class 1 and class 2 printers, as defined in ISO/IEC 11160-1. This International Standard specifies three different test patterns: a standard business letter; a spreadsheet; a graphic pattern. In addition, this International Standard defines a method for a performance test and one for an endurance test.

Information technology Office equipment Printing devices Method for measuring throughput Class 1 and Class 2 printers Adopted by INCITS

DLA SMD-5962-95731 REV C-1999 高速抗辐射互补金属氧化物半导体同相八进制缓冲器或三状态输出行驱动器硅单片电路线型微电路

This drawing documents three product assurance class levels consisting of high reliability (device classes Q and M), space application (device class V) and for appropriate satellite and similar applications (device class T).

MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NON-INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

ISO/IEC 9995-3:1994/Amd 1:1999 信息技术.文本用键盘配置和办公系统.第3部分:字母数字段的字母数字区的互补布置.修改件1

Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section; Amendment 1

KS X 5202-1999 信息处理设备和办公设备的安全性

1.1.1This Korean Industrial Standard specifies the Information Technology Equipment (including business equipment and its associated equipment) where 110/220V dual sync or 220V only for a single phase and 220/380V dual sync or 380V only for thee-phase are applied. This standard specifies the requirements necessary for the safety of the users or general people who has a possibility to treat to these equipments, including maintenance workers if specified specially. This standard consists of the system of the interconnected equipment or individual equipment and aims to secure the safety of the equipment to be installed, operated and maintained in accordance with the means specified by the manufacturer. For the equipment to be put on vehicles, ships or aircrafts, the equipment to be used in the tropical zone or the equipment to be used in the area over 2000m above sea level, additional requirements may be demanded separately. For the equipment to be used in the area where water can penetrate, additional requirements may be demanded. Regarding to the requirements and related test of this case, see Appendix 9. The examples of the equipment to be applied to this standard, are as follows; Normative references: KS C 0102 Graphical symbols for electrical apparatus KS C 3004 Testing method of rubber and plastic insulated wires and cables KS C 3303 Rubber insulated flexible cords KS C 3304 Polyvinyl chloride insulated flexible cords KS C 4004 Classification of materials for insulation of electrical machinery and apparatus KS C 8305 Plugs and receptacles for domestic and similar general use Examples Data and document processor, personal computer, indicator, data creating unit, data terminal, data line longitudinal unit, typewriter, calculator, counter, book recorder, cash register, store terminal, paper reader & puncher, stapler, copy machine, eraser, letter disposer, magnetic tape disposer, electric papercrusher, micro film machine, paper money disposer, electric drafting instruments, paper disposer (cutter, sorter), paper sorter, mail fee cashier and telegram printer The equipments described above are not all included and other equipment can be included in the scope of this standard. The equipments which satisfies related requirements of this standard are regarded as those suitable to be used for Process Control Equipments, Auto Test Equipments and the System which needs data processing device. This standard does not include the function of equipment and the requirements related to the functional features. 1.1.2 The following cases may need other requirements except those specified in this standard (1) The equipment to be used in the place where has a high temperature, dust, moisture or excessive vibration, where has an inflammable gas, and/or where has a possibility of corrosion or explosion. (2) The medical equipment to be contacted directly to the patient 1.1.3 This standard does not apply to the following equipments (1) The attached equipments such as air conditioning facility, fire alarm, fire extinguishing system. Power supply such as electric generator or transformer which is not incorporated in the equipments.Indoor wiring (2) A stencil duplication machine including offset, lithographic press which mimeographs the paper over A3 size.

SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT

ANSI/INCITS 175-1999 信息技术.19-mm ID-1型记录仪器.数字卡型盒式磁带(代替NCITS 175-1999)

Establishes the format of information on 19-mm type ID-1 instrumentation digital cassettes. It specifies the dimensions and locations of the helical data, control, time code, and annotation tracks. Also, it defines the format and recording requirements of the data blocks forming the helical data record containing digital instrumentation and other associated data and specifies the content, format, and recording method for the control record. This standard also specifies the recording requirements for the longitudinal records contained in the annotation and the time code tracks.

Information Technology - 19-mm Type ID-1 Recorded Instrumentation - Digital Cassette Tape Format Replaces NCITS 175-1999

ASTM F1225-99(2008) 测量胶片和纤维盒的打印带出口力的标准试验方法

This test method can be used to evaluate the exit force for film or fabric typewriter ribbon and impact printer cartridges from one or more lots produced by one or several manufacturers. This test method may be applied to specification acceptance, manufacturing control, or research.1.1 This test method determines the exit force for typewriter and impact printer cartridges using film and fabric inked ribbons. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

ASTM F1225-99(2003) 测量胶片和纤维盒的打印带出口力的测试方法

This test method can be used to evaluate the exit force for film or fabric typewriter ribbon and impact printer cartridges from one or more lots produced by one or several manufacturers. This test method may be applied to specification acceptance, manufacturing control, or research.1.1 This test method determines the exit force for typewriter and impact printer cartridges using film and fabric inked ribbons.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

ASTM F1225-99 测量胶片和纤维盒的打印带出口力的测试方法

1.1 This test method determines the exit force for typewriter cartridges using film and fabric inked ribbons. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

KS C 9710-3-1998 可编程控制器.第3部分:编程语言

이 규격의 본 부는 ISO/IEC 646 문자 집합의 문자들을 사용하여, 이 규격의 제1부

Programmable controllers-Part3 : Programming languages

IEEE 1101.1-1998 使用IEC 603-2插头的微机机芯规范

The basic dimensions of a range of modular subracks conforming to 60297-3 (1984-01) and 60297-4 (1995-03) for mounting in equipment according to 60297-1 (1986-09) and 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensure mechanical function compatibility are provided. This standard offers total system integration guidelines with attendant advantages, such as reduction in design and development time, manufacturing cost savings, and distinct marketing advantages.

Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors IEEE Computer Society Document

ARMY MIL-DTL-62542 C-1998 滚珠丝杠直线驱动器

This specification covers a Ball Screw Linear Actuator(BSLA) for deployment of stabilizing outriggers for the M860Al Patriot Semitrailer(see 6.1).

BALL SCREW LINEAR ACTUATOR (BSLA)

JIS B 9527:1998 页式打印机的规范格式

Format of specification for page printers

ASTM F1944-98 测定由喷墨打印机产生的文本、行和实地版输出质量的标准操作规程

1.1 This practice describes a procedure that can be used to determine the image quality of text, line- and solid-fill images produced by ink jet printers. 1.2 This practice can be used to evaluate black, process-black and primary ink, single-color images produced by ink jet printers. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers