M80 邮政综合 标准查询与下载

NF Z17-007:2004 邮政服务.服务质量.利用跟踪系统进行挂号邮件和其他类型邮件丢失的测量

Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system.

BS DD CEN/TS 14441:2005 邮政设施.邮件总体.创建、处理和跟踪

Postal services - Mail aggregates - Creation, processing and tracking

BS DD CEN/TS 14567:2004 邮政服务.邮件的自动处理.地址块定位器

This Technical Specification defines a set of physical marks called Address Block Locators (ABLs). ABLs are marks, printed in the vicinity of addresses on postal items, that are intended to facilitate automatic recognition of address location and processing of the addresses on mail sorting and video-coding equipment. The Technical Specification describes two families of ABLs which may be printed on all types of postal items, including letters, flats and parcels. In the first family, address block locators take the form of pictograms which bear no other information than being a landmark for the address block. One such pictogram is defined herein for use in association with the delivery address block. It may be printed at the same time as the address or pre-printed on an envelope, an insert, or a label, with the address being printed, on the same physical support, at a later stage. The second family covers address block locators which contain an encoded specification of the address block type and location and which can also be used for encoding other data, not directly related to address block location. Such data may include addressee or postal item identifiers, routing data, non-delivery instructions, a return address and references or other data which are relevant for either the mailer or the addressee. It may also include address checking data which may be used to verify correct interpretation of the printed address by the OCR system. In this family, three types of ABL are defined: one based on a pattern of alphanumeric characters; one on a linear bar code and one based on two-dimensional symbologies. These locators can be applied to the delivery address block and to forwarding or return address blocks. They will normally be printed within the same process as the address itself. The Technical Specification is intended to be used by: ¾ mailers, during the production of mail; ¾ MLOCR and video-coding systems manufacturers, in the design of their systems; ¾ postal operators, in the specification of requirements for mail presentation and for the acquisition of mail processing systems. Adherence to the Technical Specification is voluntary. However: ¾ mailers should be aware that adoption of those aspects of the Technical Specification which are supported by their postal operator(s) should result in faster, more reliable, processing of their postal items, particularly where the addresses on these are printed on, or surrounded by, busy backgrounds; ¾ suppliers should be aware that support for the Technical Specification should enhance the performance of their systems, increasing their attractiveness to postal operators; ¾ postal operators should be aware that adoption of the Technical Specification, and promotion of its use by mailers, should result in faster, more reliable and more efficient processing and a reduction in video-coding volumes. The set of marks defined as ABLs in this Technical Specification is not intended to be exhaustive. In particular, individual postal operators may develop systems which use other marks, including facing marks and digital postage marks, to facilitate address block location. Where this is the case, it is recommended that such other marks be supported in addition to, rather than instead of, the ABLs defined herein.

Postal services - Automated processing of mail items - Address block locator

CSA C22.2 No.96.1-04-2004 矿用电力馈线电缆.第1版

This Standard specifies construction and testing of mine power feeder cables normally used for power distribution in stationary or semi-stationary applications that are covered by CAN/CSA-M421 and the Canadian Electrical Code, Part I. This Standard cove

Mine power feeder cables First Edition

YZ/Z 0048-2003 数字化邮资符志和安全要求

Digital postage mark and security requirements

BS EN 14534:2004 邮政.服务质量.大宗邮件全程服务的邮递时间测量

Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail

DD CEN/TS 14567:2004 邮政服务 邮件项目的自动处理 地址块定位器

This Technical Specification defines a set of physical marks called Address Block Locators (ABLs). ABLs are marks, printed in the vicinity of addresses on postal items, that are intended to facilitate automatic recognition of address location and processing of the addresses on mail sorting and video-coding equipment. The Technical Specification describes two families of ABLs which may be printed on all types of postal items, including letters, flats and parcels. In the first family, address block locators take the form of pictograms which bear no other information than being a landmark for the address block. One such pictogram is defined herein for use in association with the delivery address block. It may be printed at the same time as the address or pre-printed on an envelope, an insert, or a label, with the address being printed, on the same physical support, at a later stage. The second family covers address block locators which contain an encoded specification of the address block type and location and which can also be used for encoding other data, not directly related to address block location. Such data may include addressee or postal item identifiers, routing data, non-delivery instructions, a return address and references or other data which are relevant for either the mailer or the addressee. It may also include address checking data which may be used to verify correct interpretation of the printed address by the OCR system. In this family, three types of ABL are defined: one based on a pattern of alphanumeric characters; one on a linear bar code and one based on two-dimensional symbologies. These locators can be applied to the delivery address block and to forwarding or return address blocks. They will normally be printed within the same process as the address itself. The Technical Specification is intended to be used by: ¾ mailers, during the production of mail; ¾ MLOCR and video-coding systems manufacturers, in the design of their systems; ¾ postal operators, in the specification of requirements for mail presentation and for the acquisition of mail processing systems. Adherence to the Technical Specification is voluntary. However: ¾ mailers should be aware that adoption of those aspects of the Technical Specification which are supported by their postal operator(s) should result in faster, more reliable, processing of their postal items, particularly where the addresses on these are printed on, or surrounded by, busy backgrounds; ¾ suppliers should be aware that support for the Technical Specification should enhance the performance of their systems, increasing their attractiveness to postal operators; ¾ postal operators should be aware that adoption of the Technical Specification, and promotion of its use by mailers, should result in faster, more reliable and more efficient processing and a reduction in video-coding volumes. The set of marks defined as ABLs in this Technical Specification is not intended to be exhaustive. In particular, individual postal operators may develop systems which use other marks, including facing marks and digital postage marks, to facilitate address block location. Where this is the case, it is recommended that such other marks be supported in addition to, rather than instead of, the ABLs defined herein.

Postal services - Automated processing of mail items -Address block locator

DIN EN 14137:2004 邮政服务.服务质量.利用跟踪系统进行挂号邮件和其他类型邮件服务损失的测量

This European Standard specifies methods for measuring the level of loss and substantial delay of domestic and cross-border registered letter mail, collected, processed and delivered by postal service providers. The resulting overall figure for loss and substantial delay is expressed as a percentage of the total posted registered mail collected or received by the postal service providers. This European Standard is applicable only to those service providers which have a measurement system in place which - records each item as it is posted, - records each item as it is delivered, - can, by comparing these records, count the number of items which have been posted and not delivered.

Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system; German version EN 14137:2003

YZ/T 0099.5-2003 邮政服装.第5部分:外勤T恤衫

Postal dress Part 5:outworker T-shirt

YZ/T 0101.6-2003 邮政服饰.第6部分:腰带

Postal trappings Part 6:the strap

YZ/T 0101.5-2003 邮政服饰.第5部分:纽扣

Postal trappings Part5:the clasp

YZ/T 0101.4-2003 邮政服饰.第4部分:肩章

Postal trappings Part 4:shoulder board

YZ/T 0101.3-2003 邮政服饰.第3部分:领结

Postal trappings Part 3:the cravat

YZ/T 0101.2-2003 邮政服饰.第2部分:领带

Postal trappings Part 2:the tie

YZ/T 0101.1-2003 邮政服饰.第1部分:帽徽

Postal trappings Part 1:the cap logo

YZ/T 0100.2-2003 邮政帽子.第2部分:女帽

Postal cap Part 2:the office women' cap

YZ/T 0100.1-2003 邮政帽子.第1部分:大檐帽

Postal cap Part 1:the office cap

YZ/T 0099.13-2003 邮政服装.第13部分:内部作业女装

Postal dress Part 13:inner processing worker woman's clothing

YZ/T 0099.12-2003 邮政服装.第12部分:内部作业男装

Postal dress Part 12:inner processing worker man's clothing

YZ/T 0099.11-2003 邮政服装.第11部分:营业马甲

Postal dress Part 11:counter service waistcoat