N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

JJF 1336-2012 非自动秤（非自行指示秤）型式评价大纲

本大纲适用于国家依法管理的中准确度等级和普通准确度等级的非自动秤(非自行指示秤)(以下简称秤)的型式评价。

Program of Pattern Evaluation for Nonautomatic Weighing Instrument(Non-self-indicating Weighing Instrument)

JJF 1333-2012 数字指示轨道衡型式评价大纲

本大纲适用于符合JJG 781《数字指示轨道衡》和GB/T 15561《静态电子轨道衡》要求、标准轨距的数字指示轨道衡(以下简称轨道衡)的型式评价,其他非标准轨距轨道衡可参照采用。

Program of Pattern Evaluation for Digital Indication Rail-weighbridges

JJF 1335-2012 定角式雷达测速仪型式评价大纲

本规范适用于采用雷达多普勒频移原理的定角式非调制单频连续波定角式雷达测速仪（以下简称雷达测速仪），包括定角式雷达超速自动监测系统的雷达测速单元（以下简称雷达测速单元）的型式评价。

Program of Pattern Evaluation of Fixed-angle Rader Speed Measurement Devices

JJG 234-2012 自动轨道衡检定规程

本规程适用于自动轨道衡(以下简称“轨道衡”)的首次检定、后续检定和使用中检查。

Verification Regulation of Automatic Rail-weighbridges

JIS B 1757-1:2012 单个齿轮测量仪器的评价.第1部分:齿轮形状工艺方法

This Standard specifies the evaluation methods of instruments used for gear measurements of involute, helix, pilix, pitch and tooth space runout by using the gear shape artifacts.

Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts

ANSI/NFSI B101.0-2012 走道滑动阻力测量用走道表面审计规程

This standard provides the technical procedures for walkway auditing and measuring the coefficient of friction (tribometry) of walkway surfaces in both public and private facilities.

Walkway Surface Auditing Procedure for the Measurement of Walkway Slip Resistance

DIN EN ISO 15530-3:2012 几何产品规格(GPS).坐标测量机(CMM):测量不确定度的测定技术.第3部分:校准工件或测量标准的使用(ISO 15530-3-2011).德文版 EN 15530-3-2011

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011

JJF 1326-2011 质量比较仪校准规范

本规范适用于各类质量比较仪（以下简称比较仪）的校准。

Calibration Specification for Mass Comparators

BS EN ISO 15530-3:2011 产品几何技术规范(GPS).三坐标测量机(CMM).判定测量不确定度的技术.校正工件或测量标准的使用

Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards

ISO 15530-3:2011 产品几何形状规范(GPS).坐标测量仪(CMM).测量结果不确定性测定法.第3部分:校准工件的使用或测量标准

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards

JJF 1313-2011 手持式测距仪型式评价大纲

本大纲适用于测量范围至100m的超声波测距仪和手持式激光测距仪的型式评价。

Program of Pattern Evaluation for Hand-held Distance Instruments

JJG 1071-2011 线加速度计检定装置（重力场法）检定规程

本规程适用于在重力场中基于精密分度法的线加速度计检定装置的首次检定、后续检定和使用中检查。

Verification Regulation of Verification Equipment of Linear Accelerometer by Earth's Gravitation

DIN EN ISO 10360-7:2011 产品几何技术规范(GPS).坐标测量机(CMM)的验收检测和复检检测.第7部分:装备成像探测系统的坐标测量机(ISO 10360-7-2011);德文版本EN ISO 10360-7-2011

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011

DIN EN ISO 8015:2011 产品几何量技术规范(GPS).原理.概念,原则和规则(ISO 8015-2011);德文版本EN ISO 8015-2011

Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011); German version EN ISO 8015:2011

BS EN ISO 9493:2010 产品几何技术规范(GPS).尺寸测量设备.刻度盘测试指示器(杠杆式).设计和计量学特征

This International Standard specifies the most important design and metrological characteristics of dial test indicators (lever type).

Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics

JJG 784-2010 深沟球轴承跳动量测量仪检定规程

Verification regulations for deep groove ball bearing runout measuring instrument

BS EN ISO 10360-7:2011 产品几何技术规范(GPS).坐标测量机(CMM)的验收和复检试验.装有影像探测系统的坐标测量机(CMM)

This part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMs using imaging probing systems of any type operating in the discrete-point probing mode. This part of ISO 10360 does not explicitly apply to: - non-Cartesian CMMs; however, parties may apply this part of ISO 10360 to non-Cartesian CMMs by mutual agreement; - CMMs using other types of optical probing; however, parties may apply this approach to other optical CMMs by mutual agreement; - CMMs using contact probing systems (see ISO 10360-2 for contact probing systems). This part of ISO 10360 specifies performance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for proving conformance, and applications for which the acceptance and reverification tests can be used.

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems

ISO 10360-7:2011 产品几何量技术规范(GPS).坐标测量机(CMM)的验收和重新验证试验.第7部分:配备成像探测系统的CMMs

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems

SN/T 0188.4-2011 进出口商品衡器鉴重规程.第4部分：轨道衡鉴重

本部分规定了进出口商品轨道衡鉴重的基本要求、鉴重方法和一般程序。 本部分适用于以铁路运输的进出口商品的静态轨道衡鉴重。

Rules for the weight survey by weighing instrumnet on import and export commodities.Part 4:Weight survey by rail-weighbridge

SN/T 0188.6-2011 进出口商品衡器鉴重规程.第6部分：天平鉴重

本部分规定了进出口商品天平鉴重的基本要求、鉴重方法和一般程序。 本部分适用于进出口商品天平鉴重。

Rules for the weight survey by weighing instrument on import and export commodities.Part 6:Weight survey by balance