N18 工业控制机与计算技术应用装置 标准查询与下载
共找到 1749 条与 工业控制机与计算技术应用装置 相关的标准，共 117 页
This part of IEC 62769 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure. Figure 1 - FDI architecture diagram
Field device integration (FDI) - Part 2: FDI Client
- ICS
- 25.040.40
- CCS
- N18
- 发布
- 2021-02-01
- 实施
Power systems management and associated information exchange. Data and communications security. Security for IEC 61850
- ICS
- CCS
- N18
- 发布
- 2020-12-09
- 实施
- 2020-12-09
Industrial-process measurement, control and automation. Digital factory framework. General principles
- ICS
- 25.040.40
- CCS
- N18
- 发布
- 2020-12-09
- 实施
- 2020-12-09
Specifies process requirements for the secure development of products used in industry automation and control systems. It defines a secure development life-cycle (SDL) including security requirements definition, secure design, secure implementation (including coding guidelines), verification and validation, defect management, patch management and product end-of-life. These requirements can be applied to new or existing processes for developing, maintaining and retiring hardware, software or firmware for new or existing products. These requirements apply to the developer and maintainer of the product, but not to the user of the product.
Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements (IEC 62443-4-1:2018); German version EN IEC 62443-4-1:2018
- ICS
- 25.040.40;35.030;35.240.50
- CCS
- N18
- 发布
- 2018-10-01
- 实施
- 2018-10-01
UL Standard for Safety Industrial Control Panels Relating to Hazardous (Classified) Locations (Fourth Edition)
- ICS
- CCS
- N18
- 发布
- 2018-08-21
- 实施
This part of IEC 61784-5 specifies the installation profiles for CPF 3 (PROFIBUS/PROFINET)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
This part of IEC 61784-5 specifies the installation profiles for CPF 6 (INTERBUS)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
This part of IEC 61784 specifies the installation profile for CPF 21 (FL-net1). The installation profile is specified in Annex A. The annex is read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
- 2018-09-01
This part of IEC 61784-5 specifies the installation profiles for CPF 8 (CC-Link1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
This part of IEC 61784 specifies the installation profiles for CPF 12 (EtherCATTM)1. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
- 2018-09-01
This part of IEC 61784-5 specifies the installation profiles for CPF 18 (SafetyNET p1). The installation profiles are specified in Annex A. This annex is read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
- 2018-09-01
This part of IEC 61784-5 specifies the installation profiles for CPF 2 (CIPTM1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
- 2018-09-01
This part of IEC 61784 specifies the installation profiles for CPF 20 (ADS-net1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.
Industrial communication networks - Profiles - Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20
- ICS
- 25.040.40;35.100.20;35.100.40;35.160;35.240.50
- CCS
- N18
- 发布
- 2018-08-01
- 实施
- 2018-09-01
This document specifies a set of key performance indicators in production planning, which allow comparison and monitoring of the production planning process in a standardized framework. As a first step, the utilization of the KPIs is elaborated in order to organize the indicators in a multi-level system taking different ranges of the planning process into account. This development of a multi-level system represents the core of this document. The scope of the planning processes discussed in this document is limited to production planning for products in series production. Only tasks carried out within the production planning process are considered in this approach. All key indicators presented are recommendations and can also be used in accordance with the general validity of the reference process from ISO 18828-2 and relate to the content described in this document.
Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 4: Key performance indicators (KPIs) in production planning processes
- ICS
- 25.040.40
- CCS
- N18
- 发布
- 2018-06-01
- 实施
Technical specifications for infrared scanning temperature monitoring system for industrial rotary kilns
- ICS
- 17.200.20
- CCS
- N18
- 发布
- 2018-04-30
- 实施
- 2018-12-01
This part of IEC 62443 specifies process requirements for the secure development of products used in industrial automation and control systems. It defines a secure development life-cycle (SDL) for the purpose of developing and maintaining secure products. This life-cycle includes security requirements definition, secure design, secure implementation (including coding guidelines), verification and validation, defect management, patch management and product end-of-life. These requirements can be applied to new or existing processes for developing, maintaining and retiring hardware, software or firmware for new or existing products. These requirements apply to the developer and maintainer of the product, but not to the integrator or user of the product. A summary list of the requirements in this document can be found in Annex B.
Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements
- ICS
- 25.040.40;35.030;35.240.50
- CCS
- N18
- 发布
- 2018-01-01
- 实施
This part of IEC 61131, which is a technical report, applies to the programming of program- mable controller systems using the programming languages defined in IEC 61131-3. The scope of IEC 61131-3 is applicable to this part. This document provides a) guidelines for the application of IEC 61131-3, b) guidelines for the implementation of IEC 61131-3 languages for programmable controller systems, c) programming and debugging tool (PADT) recommendations. For further information IEC 61131-4 describes other aspects of the application of programmable controller systems, e. g. electromagnetic compatibility or functional safety. NOTE Neither IEC 61131-3 nor this document explicitly addresses safety issues of programmable controller systems or their associated software. The various parts of IEC 61508 can be consulted for such considerations.
Industrial-process measurement and control - Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages
- ICS
- 25.040.40;35.060;35.240.50
- CCS
- N18
- 发布
- 2017-11-01
- 实施
Industrial automation systems and integration - JT file format specification for 3D visualization
- ICS
- 25.040.40
- CCS
- N18
- 发布
- 2017-11-01
- 实施
Industrial-process measurement and control. Data structures and elements in process equipment catalogues. List of properties (LOPs) of measuring equipment for electronic data exchange. Generic structures
- ICS
- 25.040.40;35.100.20
- CCS
- N18
- 发布
- 2017-07-25
- 实施
- 2017-07-31
This document addresses the modelling of the data collected from data acquisition systems at control level to be stored at the manufacturing management level and processed further at this level for any management purpose. The following are within the scope of this document: — quantitative or qualitative data collected from data acquisition systems at the control or management level to be stored at the management level and used later on to manage manufacturing; — time stamping and time measurement provided from data acquisition systems for control and management data. The following are outside the scope of this document: — any data only related to remote and real time measurement and management; — product definition data as modelled in the ISO 10303 series; — catalogue and library data as modelled in ISO 13584 and ISO 15926; — control data that are only used at the control level as well as those that are not used for manufacturing management.
Industrial automation systems and integration - Industrial manufacturing management data - Part 44: Information modelling for shop floor data acquisition
- ICS
- 25.040.40
- CCS
- N18
- 发布
- 2017-07-01
- 实施
