N30 光学仪器综合 标准查询与下载

DIN ISO 9022-11:2016 光学和光子学.环境试验方法.第11部分:霉菌生长(ISO 9022-11-2015)

Optics and photonics - Environmental test methods - Part 11: Mould growth (ISO 9022-11:2015)

DIN ISO 10109:2015 光学和光子学.环境试验的选择指南(ISO 10109-2015)

Optics and photonics - Guidance for the selection of environmental tests (ISO 10109:2015)

DIN ISO 9334:2015 光学和光子学.光学转移函数.定义和关系式(ISO 9334-2012)

Optics and photonics - Optical transfer function - Definitions and mathematical relationships (ISO 9334:2012)

DIN ISO 9335:2015 光学和光学仪器.光学传递函数.测量原理和程序(ISO 9335-2012)

Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)

BS ISO 14132-1:2015 光学和光子学. 远视系统词汇. 通用术语和ISO 14132中术语的字母索引

Optics and photonics. Vocabulary for telescopic systems. General terms and alphabetical indexes of terms in ISO 14132

NF S10-008-5*NF ISO 10110-5:2015 光学和光子学.光学元件和系统制图.第5部分:表面形状公差

Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances

NF S10-008-19*NF ISO 10110-19:2015 光学和光子学. 光学元件和系统用图纸的编制. 第19部分: 表面和部件的通用描述

Optics and photonics - Preparation of drawings for optical elements and systems - Part 19 : general description of surfaces and components

NF S10-008-6*NF ISO 10110-6:2015 光学和光子学.光学元件和系统用图纸制备.第6部分:定心公差

Optics and photonics - Preparation of drawings for optical elements and systems - Part 6 : centring tolerances

DIN 58197-1:2015 光学涂层.第1部分:抗反射涂层的最低要求;德文和英文版本

Optical coatings - Part 1: Minimum requirements for antireflecting coatings; Text in German and English

DIN 58197-2:2015 光学涂层.第2部分:反射涂层的最低要求;德文和英文版本

Optical coatings - Part 2: Minimum requirements for reflecting coatings; Text in German and English

DIN 58197-3:2015 光学涂膜.第3部分:中性分裂膜的最低要求;德文和英文版本

Optical coatings - Part 3: Minimum requirements for neutral beam splitting coatings; Text in German and English

BS ISO 10110-5:2015 光学和光子学 准备光学元件和系统的图纸 表面形状公差

Optics and photonics. Preparation of drawings for optical elements and systems. Surface form tolerances

DIN ISO 9022-6:2015 光学和光子学.环境试验方法.第6部分:尘埃试验(ISO 9022-6-2015)

Optics and photonics - Environmental test methods - Part 6: Dust (ISO 9022-6:2015)

ISO 10110-6:2015 光学和光子学.光学元件和系统制图准备 第6部分:中心公差

This International Standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. This part of ISO 10110 specifies rules for indicating centring tolerances for optical elements, subassemblies, and assemblies. This part of ISO 10110 applies to plano surfaces, rotationally invariant surfaces, circular cylindrical, noncircular cylindrical, and non-symmetrical surfaces (general surfaces). General surfaces are described using ISO 10110-19.

Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances

DIN ISO 9022-8:2015 光学和光子学.环境试验方法.第8部分:高压、低压及浸渍(ISO 9022-8-2015)

Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion (ISO 9022-8:2015)

DIN ISO 9022-7:2015 光学和光子学.环境试验方法.第7部分:耐雨滴落试验

Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain (ISO 9022-7:2015)

ISO 10110-5:2015 光学和光子学.光学元件和系统制图准备.第5部分:表面形状公差

This International Standard specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. This part of ISO 10110 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit “fringe spacings” is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated. This part of ISO 10110 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.

Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances

DIN ISO 9022-3:2015 光学和光子学.环境试验方法.第3部分:机械应力(ISO 9022-3:2015)

Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2015)

ISO 14999-4:2015 光学和光子学.光学元件和光学系统的干涉仪测量.第4部分:ISO 10110中指定公差的注释和评定

This part of ISO 14999 applies to the interpretation of interferometric data relating to the measurement of optical elements. This part of ISO 14999 gives definitions of the optical functions and values specified in the preparation of drawings for optical elements and systems, made in accordance with ISO 10110-5 and/or ISO 10110-14 for which the corresponding nomenclature, functions, and values are listed in ISO 10110-5, Annex B. It also provides guidance for their interferometric evaluation by visual analysis.

Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110

BS ISO 10110-19:2015 光学和光子学. 光学元件和系统用图纸的编制. 表面和部件的通用描述

Optics and photonics. Preparation of drawings for optical elements and systems. General description of surfaces and components