N30 光学仪器综合 标准查询与下载

JIS B 0090-9:2021 光学元件和系统图纸的准备. 第9部分: 表面处理和涂层

Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating

JIS C 6183-1:2019 光谱分析仪. 第1部分: 试验方法

Optical spectrum analyzers -- Part 1: Test methods

JIS C 5910-1:2019 非波长选择光学分路器. 第1部分: 通用规格

Non-wavelength-selective fiber optic branching devices -- Part 1: Generic specification

ISO 10110-14:2018 光学和光子学. 光学元件和系统的制图准备. 第14部分: 波阵面变形公差

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefront with respect to a given reference surface is excluded from this document. There is no requirement that a tolerance for wavefront deformation is indicated.

Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance

HG/T 5507-2018 光学功能薄膜 液晶显示背光模组用上扩散膜

Optical functional thin film liquid crystal display backlight module uses diffusion film

ISO 9211-1:2018 光学和光电学. 光学涂层. 第1部分: 词汇

This document defines terms relevant to optical coatings. These terms are grouped in four classes: Terms and definitions, definition of coatings by function, definitions of common coating imperfections and other definitions. This document identifies surface treatments of components and substrates excluding ophthalmic optics (spectacles) by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods whenever necessary, but is not intended to define the process method.

Optics and photonics - Optical coatings - Part 1: Vocabulary

DIN 58774:2018 光学工程生产.真空吸盘打孔尺寸

This document specifies the dimensions and Diameters of punctures for vaccum chucks. The vacuum chucks are used in the production in optical Engineering for fixation of workpieces with planar bearing surface. The punctures are intended to distribute a vacuum upon a surface by opening and closure of drillings.

Production in optical engineering - Dimensions for punctures of vacuum chucks

DIN ISO 10110-7:2018 光学和光子学.光学元件和系统的制图准备.第7部分:表面缺陷(ISO 10110-7-2017)

ISO 10110 (all parts) specifies the presentation of design and functional requirements for single optical elements and for optical assemblies in technical drawings used for their manufacture and inspection. This document specifies the indication of the level of acceptability of surface imperfections within a test region on individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches. The acceptance level for imperfections is specified, taking into account functional effects (affecting image formation or durability of the optical element), as well as cosmetic (appearance) effects. This document applies to transmitting and reflecting surfaces of finished optical elements, whether or not they are coated, and to optical assemblies. It allows permissible imperfections to be specified according to the area affected by imperfections, or alternatively by the visibility of imperfections, on components or in optical assemblies.

Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections (ISO 10110-7:2017)

JB/T 13358-2018 光学薄膜带通干涉滤光片

Optical thin film bandpass interference filter

JB/T 13360-2018 荧光检测分析用干涉滤光片

Interference filters for fluorescence detection and analysis

JB/T 13361-2018 紫外、可见和近红外光学滤光片

UV, visible and near-infrared optical filters

DB35/T 1714-2017 验光配镜企业质量技术服务管理规范

本标准规定了福建省验配眼镜企业的验配资源配置、验光配镜操作流程控制、质量管理和顾客服务管理以及企业等级划分。 本标准适用于眼镜验光配镜企业（包含个体工商户）质量技术服务与管理。

Optometry enterprise quality technical service management specification

BS ISO 14997:2017 光学和光子学 光学元件表面缺陷的测试方法

Optics and photonics. Test methods for surface imperfections of optical elements

BS ISO 9849:2017 光学和光学仪器 大地测量和测量仪器 词汇

Optics and optical instruments. Geodetic and surveying instruments. Vocabulary

BS ISO 10110-7:2017 光学和光子学 准备光学元件和系统的图纸 表面瑕疵

Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfections

BS ISO 16331-1:2017 光学和光学仪器 测试测量和施工仪器的实验室程序 手持式激光测距仪的性能

Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters

ISO 20711:2017 光学和光子学.环境要求.远焦系统

Optics and photonics - Environmental requirements - Test requirements for telescopic systems

ISO 16331-1:2017 光学和光学仪器.试验调查和建筑仪器用实验室规程.第1部分:手持型激光测距仪性能

Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters

DIN ISO 9022-23:2016 光学和光子学.环境试验方法.第23部分:寒冷环境温度,干热和湿热条件下的低压(ISO 9022-23-2016)

Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat (ISO 9022-23:2016)

DIN ISO 10110-9:2016 光学和光子学.光学元件和系统制图准备.第9部分:表面处理和镀层(ISO 10110-9-2016)

Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:2016)