共找到 42 条与 光学设备 相关的标准,共 3 页
Optics and photonics - Specification of reference dictionary - General overview on organization and structure
Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006, Corrigendum to DIN EN 62129:2007-01; German version CENELEC-Cor. :2006 to EN 62129:2006
Fundamental standards for optics - Determination of focal length
This International Standard specifies methods of determining distortion in optical systems for the purposes of quality evaluation. It applies to optical imaging systems in the optical spectral range from 100 nm to 15 000 nm which, by their design, aim at a rotationally symmetric image geometry. It is applicable to electro- optical imaging systems provided that adequate rotational symmetry of the image is guaranteed. It does not, therefore, apply to anamorphic and fibre optic systems.
Optics and photonics - Quality evaluation of optical systems - Determination of distortion (ISO 9039:2008)
This International Standard applies to night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night such as rescue actions under low light conditions, urgent repairs in the dark and night time surveillance. The International Standard does not cover thermal imaging technology.
Optics and photonics - Telescopic systems - Specifications for night vision devices
Production equipment for microsystems - Specification for an X-Ray Lithography Mask Support Ring
This part of ISO 14999 applies to the interpretation of interferometric data relating to the measurement of optical elements. This part of ISO 14999 gives definitions of the optical functions specified in the preparation of drawings for optical elements and systems,made in accordance with ISO 10110-5 and/or ISO 10110-14 as well as guidance for their interferometric evaluation with visual analysis.
Optics and photonics - Interferometric measurement of optical elements and optical systems - Interpretation and evaluation of tolerances specified in ISO 10110
This part of ISO 19012 specifies the use of the marking, “Plan”, on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. This part of ISO 19012 applies to visual observation using the combination of objective lens, tube lens and eyepiece as specified by the manufacturer. This marking is consistent with ISO 8578.
Optics and photonics - Designation of microscope objectives - Part 1: Flatness of field/Plan
This part of ISO 14490 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2005);English version of DIN ISO 14490-5:2007-06
This International Standard specifies the division of optical radiation into spectral bands for optics and photonics. It does not apply to lighting or telecommunication applications or to protection against hazards from optical radiation in occupational areas.
Optics and photonics - Spectral bands
Optics and photonics - Preparation of drawings for optical elements and systems - Part 1 : general.
이 규격은 현미경 대물렌즈 및 접안렌즈의 광학 특성에 대한 데이터 및 관련 표시 위치에
Optics and optical instruments-Microscopes-Marking of objectives and eyepieces
Production in optical engineering - Magazin-discs
The document contains tools and workpiece chucks with fitting dimensions.
Production in optical engineering - Fitting dimensions for tools and workpiece chucks with cylindrical fitting
本标准规定了纤维直径光学分析仪的基本参数、技术要求、试验方法、检验规则和抽样、标志、包装运输和贮存。 本标准适用于投影显微镜法、采用计算机数字图像处理技术的带有或不带有目视观察系统的纤维直径光学分析仪(以下简称仪器)。
Optical fibre diameter analyser
Optics and photonics - Preparation of drawings for optical elements and systems - Part 10 : table representing data of optical elements and cemented assemblies.
Optical amplifier test methods - Part 11-1 : polarization mode dispersion - Jones matrix eigenanalysis method (JME).
Standalone wide-screen polarized stereo motion-picture projection deflecting mirror - Technical specifications
This performance specification covers one type of common module with three changeable models; Optical Imager, SU-97/üA, SU-97A/UA, and SU-97BRJA.
OPTICAL IMAGER, SU-97/UA, SU-97A/UA, AND SU-97B/UA
This performance specification covers one type of common module, Optical Imager SU-103AJA and SU-l03A/UA.
OPTICAL IMAGER, SU-103/UA AND SU-103A/UA
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号