N61 实验室基础设备 标准查询与下载
共找到 237 条与 实验室基础设备 相关的标准，共 16 页
This part of ISO 10648 applies to enclosures or enclosure lines intended to be used for work on: — radioactive and/or toxic products where containment is required for protection of personnel and environment, — sensitive products requiring a special atmosphere and/or a sterile medium. This part of ISO 10648 deals with three types of containment enclosure: — glove boxes, — tong boxes, and — containment enclosures with larger dimensions, used with remote manipulators mounted behind independent shielding. Some dimensions of the last two types will be given in a subsequent International Standard dealing with the mounting of tongs and manipulators. The following enclosures have been deliberately excluded from the scope of this part of ISO 10648: — pressurized vessels, — ventilated hoods, — shielded enclosures, manufactured from concrete only, with or without cladding, or from lead only, — sealed sources, — transport packaging for radioactive materials, — enclosures, primary circuits and vessels of nuclear reactors. This part of ISO 10648 describes the use and principles of design for containment enclosures chosen as reference examples of the three following types: — plastic enclosures, — metal-framed enclosures, — hot-worked metal enclosures. The last two types can be mounted behind shielding or can have directly attached shielding. Where standard dimensions are not suitable, other dimensions may be chosen but the containment enclosure shall comply with this part of ISO 10648 in design principles, mounting and assembly. It shall also comply with relevant safety standards and regulations. Examples of various seals available and the assembly of containment enclosures are shown in annexes A and B. ISO 10648-2 gives the classification of containment enclosures according to their leak tightness and associated checking methods. Associated equipment will be detailed in future International Standards.
Containment enclosures - Part 1: Design principles
- ICS
- 13.280;71.040.10
- CCS
- N61
- 发布
- 1997-05
- 实施
The document describes constructional and functional features of laboratory centrifuges together with relevant tests. It is intended to put the user into the position to compare these features with the claims made by the manufacturer.
Laboratory centrifuges - Part 1: Definitions, testing, marking
- ICS
- 71.040.20;01.040.71
- CCS
- N61
- 发布
- 1996-03
- 实施
Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051 : particular requirements for laboratory equipment for mechanical mixing and stirring.
- ICS
- 71.040.20
- CCS
- N61
- 发布
- 1996-01-01
- 实施
- 1996-01-20
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
- ICS
- 11.080.10
- CCS
- N61
- 发布
- 1995-12
- 实施
This document defines requirements and tolerances of dimensions for large size cantilever laboratory bench tops from all materials. Nominal dimensions are no longer defined, in contradiction to the preceeding edition of the standard. The requirements concern among others the load-carrying capacity and the processibility of the tiles.#,,#
Laboratory furniture - Large size tiles for laboratory bench tops
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1995-10
- 实施
This document describes requirements and tests for ductless filtering fume enclosures in laboratories. After filtering the foul air of the fume enclosure is conducted back into the laboratory room. Application fields and precautions are defined and distinguished from fume cupboards according DIN 12924-1.
Laboratory furniture - Ductless filtering fume enclosures - Requirements, test
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1995-10
- 实施
- 1995-10-01
Stands. Demountable stands. Materials. Resistance requirements. Tests. Typical file.
- ICS
- 91.040.10;91.090;97.220.10
- CCS
- N61
- 发布
- 1995-07-01
- 实施
- 1995-07-20
本标准规定了空气热老化试验箱的型式、基本参数、技术要求、试验方法、检验规则、标志、包装与储存等要求。 本标准适用于自然对流式和强制对流式的老化箱。
Air heat-up ageing tests box
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1994-09-08
- 实施
- 1995-05-01
本标准规定了电子天平产品型号编制方法。 本标准适用于电子天平。 本标准不适用于真空天平、热天平等专用天平、自动天平及协议制造的出口天平。
Method of designations of electronic balance products
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1994-09-08
- 实施
- 1995-05-01
本标准规定了实验室离心机系列产品的基本参数与型号编制方法。 本标准适用于离心机型号的编制。
Basic parameter of laboratory centrifuge and method of type designations
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1994-09-08
- 实施
- 1995-05-01
1.1 This specification covers the performance requirements for general-purpose air ovens ordinarily used in testing operations, which have a testing chamber up to 0.6 m3 (25 ft3) in volume. It is applicable to gravity-convection ovens designed to operate over all or part of the temperature range from 20176;C above ambient temperature to 200176;C and to forced-ventilation ovens designed to operate over all or part of the temperature range from 20176;C above ambient temperature to 500176;C. Note 18212;Ovens are designed for maximum operating temperatures of about 200176;C, 300176;C, and 500176;C, the thermal insulation and cost of the oven being dependent on the maximum temperature required.1.2 This specification does not include safety requirements that are essential for ovens used in the presence of combustible vapors or gases.1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.
Standard Specification for Gravity-Convection And Forced-Ventilation Ovens
- ICS
- 71.040.10 (Chemical laboratories. Laboratory equip
- CCS
- N61
- 发布
- 1994
- 实施
This standard provides a mechanism for promoting confidence in calibration laboratories and measuring and test equipment when it can be shown that they are operated in compliance with its requirements. The intent of this Standard is that laboratories meeting its requirements comply, for calibration activities, with the relevant requirements of the ANSI/ASQC Q90 series of standards, including those of the model described in ANSI/ASQC Q92 when they are acting as suppliers producing calibration results. This Standard includes the requirements relevant to calibration laboratories of ISO/IEC Guide 25 (1990) and requirements relevant to the quality assurance of measuring and test equipment derived from MI-Std 45662A.
Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements
- ICS
- 17.020;03.120.20
- CCS
- N61
- 发布
- 1994
- 实施
1.1 This specification covers the performance requirements for general-purpose air ovens ordinarily used in testing operations, which have a testing chamber up to 0.6 m3 (25 ft3) in volume. It is applicable to gravity-convection ovens designed to operate over all or part of the temperature range from 20176;C above ambient temperature to 200176;C and to forced-ventilation ovens designed to operate over all or part of the temperature range from 20176;C above ambient temperature to 500176;C. Note 18212;Ovens are designed for maximum operating temperatures of about 200176;C, 300176;C, and 500176;C, the thermal insulation and cost of the oven being dependent on the maximum temperature required.1.2 This specification does not include safety requirements that are essential for ovens used in the presence of combustible vapors or gases.1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
- ICS
- 71.040.10 (Chemical laboratories. Laboratory equip
- CCS
- N61
- 发布
- 1994
- 实施
1.1 This specification covers the performance requirements for general purpose air incubators ordinarily used for incubating procedures, which have an incubating chamber up to 0.6 m3 (25 ft3) in volume. It is applicable to gravity and forced ventilation incubators designed to operate over all or part of the temperature range from 5176;C above ambient to 75176;C.1.2 This specification does not include any requirements for the safe handling of harmful or disease bearing organisms.The following precautionary caveat pertains only to the test method portions, Sections 4, 5, and 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Gravity Convection and Forced Ventilation Incubators
- ICS
- 07.080 ; 11.220
- CCS
- N61
- 发布
- 1994
- 实施
Use of autoclaves other than of material contaminated with Hazard Group 4 organisms.
Autoclaves for sterilization in laboratories - Guide to safe use and operation
- ICS
- 11.080.10;71.040.10
- CCS
- N61
- 发布
- 1993-12-15
- 实施
- 1993-12-15
Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
- ICS
- 71.040.20
- CCS
- N61
- 发布
- 1993-09-15
- 实施
- 1993-09-15
本标准规定了生物人工气候箱的产品分类、技术要求、试验方法、检验规则及标志、包装、贮存等要求。 本标准适用于采用人工光源的生物箱。
Specification for artificial bioclimatic climate chamber
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1993-07-09
- 实施
- 1994-01-01
本标准规定了实验室离心机的机械安全要求。 本标准适用于电力驱动、金属离心腔体的离心机。 本标准不适用于只能同连续分离旋转组件(转头和转头附件的总称)一起使用的离心机；不适用于整体壳由铸铁制造的离心机。
Mechanic safety requirement for laboratory centrifuge
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1993-07-09
- 实施
- 1994-01-01
本标准规定了实验室高压釜有关的产品名称、技术参数、零部件及附件、测量方法和原理与设计方面的术语。 本标准适用于实验室高压釜的科研、设计、制造、标准制订、技术文件编制和文件翻译等。
Terminology of laboratory high pressure kier
- ICS
- 71.040.10
- CCS
- N61
- 发布
- 1993-07-09
- 实施
- 1994-01-01
