N61 实验室基础设备 标准查询与下载

DLA A-A-50752 A-2001 渗透性测试包

his commercial item description (CID) establishes government acquisition requirements for a penetrant test kit, which contains the components necessary for testing new and in-use penetrant materials to determine the degree of contamination/degradation of these materials. The process control inspection verifies the performance characteristics of the materials and their

TEST KIT, PENETRANT

DLA A-A-50060 B-2001 实验室配盘天平

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BALANCES, TRIP, LABORATORY

ISO/IEC 17025:1999 检测和校准实验室能力的一般要求

General requirements for the competence of testing and calibration laboratories

JB/T 9508-1999 实验室高速离心机转头 型号及参数系列

本标准规定了实验室高速离心机及高速冷冻离心机转头的型号及参数系列。 本标准适用于实验室高速离心机及高速冷冻离心机转头的设计、制造，不适用于台式高速离心机及台式高速冷冻离心机转头。

Type and parameter series for laboratory high speed centrifuge rotors

JB/T 9511-1999 天平包装 技术条件

本标准规定了天平的包装材料和包装方法。 本标准适用于最大秤量1g～50kg天平的出厂包装。对出口天平的包装除符合本标准外，还应符合GB/T 15464的规定。

Balance-packing requirements

JB/T 9512-1999 气候环境试验设备与试验箱 噪声声功率级的测定

本标准规定了气候环境试验设备与试验箱噪声声功级的测定方法，测量环境的鉴定方法。 本标准适用于各类试验箱在空载稳定运行时的噪声测量。 本标准不适用于由建筑或建筑设计建成的气候试验室。

Climate environmental testing equipment and cabinet - Determination of sound power level of noise emitted

JB/T 9513-1999 具有光学放大器天平影屏、标尺、影像 技术条件

本标准规定了具有光学放大器天平影屏、标尺、影像的技术要求和检验方法。 本标准适用于天平影屏、标尺、影像的设计、制造和修理。

Balance with optical amplifiers-screen scale picture - Requirement

JB/T 9514-1999 数显热量计

本标准规定了数显热量计的基本参数、技术要求、试验方法、检验规则与标志、包装、贮存。 本标准适用于恒温式和绝热式数显热量计的设计制造、使用与修理。

Digital calorimeter

JB/T 9515-1999 质量法油耗测量装置 技术条件

本标准规定了质量法油耗测量装置的定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于定质量测时间或定时间测质量的非挥发性燃油耗测量装置，不适用于对易挥发性燃油油耗的测量装置。

Fuel consumption measuring equipment with mass method - Specification

JB/T 9509.2-1999 永磁旋转搅拌高压釜 控制器

本标准规定了永磁旋转搅拌高压釜控制器的技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于最大容积不大于101，最大设计压力不大于31MPa的奥氏体不锈钢制高压釜控制器。 本标准与JB/T 9509.1-1999《永磁旋转搅拌高压釜 釜体》配套使用。

High pressure autoclave with permanent rotary stirrer - Controller

JB/T 9505-1999 真空干燥箱

本标准规定了真空干燥箱的型式、技术要求、试验方法、检验规则、标志、包装与贮存。 本标准适用于物料在真空状态下进行加热干燥处理用的真空干燥箱。

Vacuum drying chamber

JB/T 9507-1999 氧弹热量计

本标准规定了恒温式和绝热式氧弹热量计的基本参数、技术要求、试验方法、检验规则、标志、包装、贮存。 本标准适用于恒温式和绝热式氧弹热量计。

Oxygen bomb calorimeter

JB/T 9509.1-1999 永磁旋转搅拌高压釜 釜体

本标准规定了永磁旋转搅拌高压釜釜体的定义、产品分类、型式与基本参数、技术要求、试验方法、包装、运输和贮存。 本标准适用于最大容积不大于10L，最大设计压力不大于31MPa的奥氏体不锈钢制高压釜釜体。 本标准不适用于焊接制造的高压釜釜体。 本标准与JB/T 9509.2-1999《永磁旋转搅拌高压釜控制器》配套使用。

High pressure autoclave with permanent stirrer - Body

JB/T 9510-1999 托盘扭力天平

本标准规定了托盘扭力天平的基本参数、技术要求、试验规则、标志、包装及贮存。 本标准适用于零读法托盘扭力天平。 本标准不适用于其他天平。

Table torsion balance

JB/T 9520-1999 上皿光学天平

本标准规定了上皿光学天平的基本参数、技术要求、试验方法及检验规则、标志、包装。 本标准适用于上皿光学天平。

Upper Dish Optical Balance

JB/T 9525-1999 滑环型电信号传递器

本标准规定了滑环型电信号传递器的基本参数、技术要求、试验方法、检验规则、标志、包装及贮存。 本标准适用于传递旋转体上的动态电阻应变信号的滑环型电信号传递器。

Slip type transmitter for electrical signal

ASTM E128-99(2011) 实验室用刚性多孔过滤器最大孔径和渗透率的标准试验方法

1.1 This test method covers the determination of maximum pore diameter and permeability of rigid porous filters used in the laboratory for filtration or diffusion. They are applicable to filters made of sintered glass, ceramic, metal, or plastic. This test method establishes a uniform designation for maximum pore diameter and also provides a means of detecting and measuring changes which occur through continued use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

ASTM E416-98 光谱化学实验室的计划和安全操作的标准实施规程

1.1 This practice covers the general planning of a spectrochemical laboratory, the equipment necessary for efficient operation of such a laboratory, and recommended safety precautions to be considered. Principal equipment housed in such a laboratory may include optical emission spectrographs, vacuum and air-path optical emission spectrometers, plasma emission spectrometers, X-ray emission spectrometers, X-ray diffractometers, and atomic absorption and flame emission spectrophotometers. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory

UL 3101-2-20-1997 实验室用电气设备.第2部分:实验室离心机

This clause of Part 1 is applicable except as foIlows 1 1 Scope Replacement： This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES 1 1 1 AsDects excluded from the scope —additional precautions which may need tO be obsewed when centrifuging materials which are flammable or explosive(see 5 4 1 01)： 一additional precautions which may need to be obsewed when centrifuging materials that chemically react vigorously(see 5．4 101) 1 1 2 Equipmenf excluded from scope —rotating electrical machinery within the scope of IEC 34 一CENTRIFUGES(used in explosive atmospheres) 1 2 Object Addition： 一contact with moving parts fsee 7．2)． 一CENTRIFUGE movement during any DISRUPTION(see 7 3 1 01)． 一expelled parts(see 7 5)： 一sinail particles from ROTOR ASSEMBLIES，expelled in air exhaust systems(see 7 5 104) 一high energy chemicaI reaction after ROTOR DISRUPTION(see 7 5 1 05)． 一lneffectiveness of BIOSEALS(see 1 3 1 01) 1 4 Environmenta，conditions Modifythethira dash asfollows： 一temperature+2。C to+40。C CopyrighL by the UndenEiLers LaboraLories]nc Sun Sep 05 15：36：10 2004

UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition

DIN 12894:1997 金属实验仪器.三脚架固定夹

The document defines dimensions, materials and design for clamps used to fit laboratory devices at tripods.#,,#

Metal laboratory ware - Clamps