P00 标准化、质量管理 标准查询与下载

NB/T 31030-2012 陆地和海上风电场工程地质勘察规范

本标准规定了风电场工程地质勘察的程序和工作深度,明确各设计阶段勘察工作的任务、内容和技术要求。本标准适用于并网型风电场工程地质勘察。

Specifications for engineering geological investigation of wind power projects

NB/T 31031-2012 海上风电场工程预可行性研究报告编制规程

本标准规定了海上风电场工程预可行性研究报告编制的原则、程序、内容、深度,以及报告的编写要求。本标准适用于新建、扩建的潮间带和潮下带滩涂、近海风电场工程预可行性研究报告的编制,深海风电场工程可参照执行。

Code for preparation of offshore wind power projects pre-feasibility study report

NB/T 31032-2012 海上风电场工程可行性研究报告编制规程

本标准规定了海上风电场工程可行性研究报告编制的原则、程序、内容、深度,以及报告的编写要求。本标准适用于新建、扩建的潮间带和潮下带滩涂风电场、近海风电场工程可行性研究报告的编制,深海风电场工程可参照执行。

Code for preparation of offshore wind power projects feasibility study report

NB/T 31033-2012 海上风电场工程施工组织设计技术规定

本标准适用于海上风电场中的潮间带和潮下带滩涂风电场、近海风电场。本标准规定了海上风电场施工组织设计应遵循的设计原则、设计方法和技术要求。本标准适用于编制新建、扩建的海上风电场工程可行性研究阶段的施工组织设计。编制海上风电场工程预可行性研究阶段、招标及施工设计阶段的施工组织设计文件可参照执行。

Code for construction planning of offshore wind power projects

DB11/T 894.1-2012 地下管线信息分类、交换、共享技术规范 第1部分 数据分类与定义

Underground pipeline information classification, exchange and sharing technical specifications Part 1 Data classification and definition

NB/T 31026-2012 风电场工程电气设计规范

本标准规定了风电场工程电气设计的内容、方法和要求。本标准适用于新建并网型风电场工程的电气设计,扩建并网型风电场工程的电气设计参照执行。本标准附录A中提供了风电场大规模脱网的电气设计措施,可结合工程实际情况予以参考应用。

Electric design code for windpower projects

DB34/T 1663-2012 安徽省高速公路工地标准化建设指南

为规范安徽省高速公路工地建设，促进施工管理的标准化、规范化、精细化，加强施工现场管理，创建文明、标准化工地，消除安全隐患，确保施工质量，特制定本指南。 本指南适用于安徽省新建、改建、扩建高速公路，一级公路及其它等级公路项目可参照执行。

Guidelines for Standardized Construction of Expressway Construction Sites in Anhui Province

JGJ/T 246-2012 房屋代码编码标准

本标准适用于房屋代码的编制。

Standard for house coding

JGJ/T 222-2011 建筑工程可持续性评价标准

本标准适用于建筑工程的可持续性评价，包括对建筑工程物化阶段、运行维护阶段、拆除处置阶段的环境影响进行定量测算和评价。

Standard for sustainability assessment of building project

ASTM D3740-11 对从事工程设计及施工中所用岩土的检测和/或检验工作的机构的最低要求的执业规程

This practice provides the basic minimum criteria for use in evaluating the qualifications of a testing or inspection agency, or both, for soil and rock. The criteria may be supplemented by more specific criteria and requirements. An individual user can also use it to judge the qualification of an agency. The existence of a formal accrediting body such as a federal, state, or independent agency is not necessary for the use of this standard. Note 18212;Users of this practice should be aware that certain of these requirements may not be achievable and/or applicable to work performed outside of the U.S.A. In such cases, users should ensure that all necessary modifications are made to these requirements such as to render them appropriate to each specific set of circumstances. The intent of this practice is to provide a consensus basis for evaluating a testing or inspection agency, or both, with respect to that agency''s capability to objectively and competently provide the specific services needed by the user. This practice may be used as a basis for accreditation. To qualify for accreditation to this standard, the agency must include at least five standards relating to testing methods, inspection methods, or both, from the standards covered under the jurisdictions of Committee D18, in its certificate of accreditation. The users of an accredited agency must review the agency''s scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.1.1 This practice establishes minimum qualifications for agencies engaged in the testing and inspection of soil and rock. Minimum requirements for field and laboratory personnel are defined. The practice also covers the establishment and maintenance of a quality system. 1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on soil and rock, and for establishing essential characteristics pertaining to an agency''s organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects. 1.3 This practice can be used as a basis to evaluate testing and inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of soil and rock as used in engineering design and construction. 1.4 This practice is applicable to all standards which include a reference to Practice D3740. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project''s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

ASTM E329-11 从事施工检查,特殊检查,或施工用材料试验的机构的标准规范

The testing and inspection of construction and the materials in construction is an important element in obtaining quality construction in general compliance to the contract documents. A Construction inspection, Special Inspection or testing agency, or both, must be selected with care after a comprehensive evaluation of their competency to perform the services properly and in compliance with the applicable building code. This standard provides basic minimum criteria for use in evaluating the qualifications of technically oriented Construction Inspection, Special Inspection or testing agency. The criteria may be supplemented by more specific criteria and requirements for particular classes of testing or types of inspection agencies. An individual user can also use it to judge the competency of an agency. The intent of this standard is to provide a consensus system standardized basis for requirements for a technically oriented Construction Inspection, Special Inspection or testing agency, with respect to the agency''s capability to objectively and competently provide the specific services without prejudice. Typically, assessing an agency involves the following three essential sequential phases: Submittal of basic information in accordance with the criteria of this specification to the evaluator by an agency desiring to be qualified to this standard, Assessing the agency-submitted information from the accreditation body, and On-site assessment of the agency by the accreditation body.1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel engaged in: a. Construction Inspection of construction and materials used in construction. b. Special Inspection of construction and materials used in construction. c. Testing of materials used in construction. 1.2 Criteria is provided for evaluating the competence of an agency to properly perform designated tests, inspections, or Special Inspection services, and establishes essential characteristics pertaining to the organization, management, personnel, facilities, quality systems, responsibilities, duties, test and inspection methods, records, and reports of the agency. This specification may be supplemented by more specific criteria and requirements if required. 1.2.1 This specification specifically addresses factors relevant to an agency’s ability to produce precise, accurate test data or determine the conformity of construction and materials used in construction with regulations, codes, standards, or specifications containing the requirements against which the test or inspection will be performed, or both. Specific or general requirements include: 1.2.1.1 Technical competency of staff, 1.2.1.2 Validity and appropriateness of test and inspection methods and procedures, 1.2.1.3 Traceability of measurements and calibrations to national standards, 1.2.1.4 Suitability, calibration, and maintenance of test equipment, 1.2.1.5 Sampling, handling, and transportation of test items, 1.2.1.6 Quality assurance of test and inspection data, 1.2.1.7 Reporting of test and inspection data or findings, and 1.2.1.8 Non Conformance Report (NCR) management and records. 1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying or accrediting, or both, agencies, public or private, engaged in the testing of materials and Construction or Special inspection of construction and materials used in construction. These inspection services include but are not limited to reinforced concrete, precast concrete, structural ste......

Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction

ASTM E329-11a 从事施工检查,特殊检查,或施工用材料试验的机构的标准规范

The testing and inspection of construction and the materials in construction is an important element in obtaining quality construction in general compliance to the contract documents. A construction inspection, Special Inspection or testing agency, or both, must be selected with care after a comprehensive evaluation of their competency to perform the services properly and in compliance with the applicable building code. This specification provides basic minimum criteria for use in evaluating the qualifications of technically oriented construction inspection, Special Inspection, or testing agency. The criteria may be supplemented by more specific criteria and requirements for particular classes of testing or types of inspection agencies. An individual user can also use it to judge the competency of an agency. The intent of this specification is to provide a consensus system standardized basis for requirements for a technically oriented construction inspection, Special Inspection, or testing agency, with respect to the agency''s capability to objectively and competently provide the specific services without prejudice. Typically, assessing an agency involves the following three essential sequential phases: Submittal of basic information in accordance with the criteria of this specification to the evaluator by an agency desiring to be qualified to this specification, Assessing the agency-submitted information from the accreditation body, and On-site assessment of the agency by the accreditation body.1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel engaged in: a. Construction Inspection of construction and materials used in construction. b. Special Inspection of construction and materials used in construction. c. Testing of materials used in construction. 1.2 Criteria is provided for evaluating the competence of an agency to properly perform designated tests, inspections, or Special Inspection services, and establishes essential characteristics pertaining to the organization, management, personnel, facilities, quality systems, responsibilities, duties, test and inspection methods, records, and reports of the agency. This specification may be supplemented by more specific criteria and requirements if required. 1.2.1 This specification specifically addresses factors relevant to an agency’s ability to produce precise, accurate test data or determine the conformity of construction and materials used in construction with regulations, codes, standards, or specifications containing the requirements against which the test or inspection will be performed, or both. Specific or general requirements include: 1.2.1.1 Technical competency of staff, 1.2.1.2 Validity and appropriateness of test and inspection methods and procedures, 1.2.1.3 Traceability of measurements and calibrations to national standards, 1.2.1.4 Suitability, calibration, and maintenance of test equipment, 1.2.1.5 Sampling, handling, and transportation of test items, 1.2.1.6 Quality assurance of test and inspection data, 1.2.1.7 Reporting of test and inspection data or findings, and 1.2.1.8 Non Conformance Report (NCR) management and records. 1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying or accrediting, or both, agencies, public or private, engaged in the testing of materials and Construction or Special inspection of construction and materials used in construction. These inspection services include but are not limited to reinforced concrete, precast concrete......

Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

DB64/ 680-2010 建筑工程安全管理规程

Construction Engineering Safety Management Regulations

JGJ/T 198-2010 施工企业工程建设技术标准化管理规范

本规范适用于施工企业开展工程建设技术标准化的管理活动。

Code for management of technical standardization of project construction of construction enterprises

ASTM E329-10 从事施工检查,特殊检查,或施工中材料试验的机构的标准规范

The testing and inspection of construction materials is an important element in obtaining quality construction. A testing and inspection agency must be selected with care after a comprehensive evaluation of its competency to perform the work properly. This standard provides basic minimum criteria for use in evaluating the qualifications of technically oriented testing or inspection agencies, or both. The criteria may be supplemented by more specific criteria and requirements for particular classes of testing or types of inspection agencies. An individual user can also use it to judge the competency of an agency. The intent of this standard is to provide a consensus system standardized basis for requirements for a technically oriented testing or inspection agency, with respect to the agency''s capability to objectively and competently provide the specific services needed by the user without prejudice. Typically, evaluating an agency involves the following three essential sequential phases: Submittal of basic information in accordance with the criteria of this specification to the evaluator by an agency desiring to be qualified to this standard, Evaluation of the agency-submitted information, and On-site verification of the agency-submitted information by the user or a qualified national authority.1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection of construction and materials used in construction. 1.2 Criteria is provided for evaluating the capability of agency to properly perform designated tests on construction materials, and establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency. This specification may be supplemented by more specific criteria and requirements for particular projects. 1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying and/or accrediting agencies, public or private, engaged in the testing and inspection of construction and materials. Building officials can use Specification E329 as a tool in the qualification and establishment of competency of inspection and testing agencies in the fields covered by Specification E329. 1.4 A certificate of accreditation, including the scope of accreditation, is required to comply with this standard. 1.5 The users of an accredited agency must review the agency''s scope of accreditation to ensure the agency has been accredited for its technical competence to perform the specific tests or inspections requested by the user.

Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction

ASTM E541-10 建造建筑物的系统分析和符合性保证从业机构资质的标准规范

1.1 This specification was initiated to meet the needs of regulatory programs for the certification of manufactured building. The various statutes differ somewhat in the responsibilities assigned to the administrative agency responsible for implementing the rules and regulations for manufactured building. The administrative agency may utilize the services and facilities of building-evaluation agencies in carrying out its responsibilities for evaluating manufactured building systems. By providing criteria for evaluating these agencies, this specification''s objective is to (1) utilize the voluntary standards system to provide a common base for the various regulatory approaches employed by the authorities having jurisdiction, and (2) make provision for varying degrees of optional technical support for the certification of manufactured building. 1.2 To establish an appropriate degree of intra- and inter-state credibility regarding building system evaluations made through governmental or private agencies, the authorities having jurisdiction may wish to utilize an accreditation program for such agencies. 1.3 Building-evaluation organizations examined under this specification may include both governmental and private agencies qualified to act on behalf of the public as designee agents (that is, agencies) of the government office having jurisdiction. 1.4 This specification covers criteria by which the technical resources of agencies, both governmental and private, may be evaluated for their capability to perform the system analysis or compliance assurance function, or combination thereof, in the evaluation and inspection (certification) of manufactured building. Practice E651/E651M may be used for the evaluation of such agencies. 1.5 These criteria set forth the minimum personnel requirements and the technical and organizational procedures required for agencies engaged in evaluating manufactured building. Other criteria such as independence, financial stability, and objectivity may need to be considered. 1.6 Criteria are included for agencies evaluating innovative as well as conventional building systems, against applicable requirements. 1.7 Agencies involved in testing, quality assurance and evaluating building components can be evaluated by using Practice E699. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

ASTM E329-09 建筑用材料的试验和/或检查机构的标准规范

The testing and inspection of construction materials is an important element in obtaining quality construction. A testing and inspection agency must be selected with care after a comprehensive evaluation of its competency to perform the work properly. This standard provides basic minimum criteria for use in evaluating the qualifications of technically oriented testing or inspection agencies, or both. The criteria may be supplemented by more specific criteria and requirements for particular classes of testing or types of inspection agencies. An individual user can also use it to judge the competency of an agency. The intent of this standard is to provide a consensus system standardized basis for requirements for a technically oriented testing or inspection agency, with respect to the agency''s capability to objectively and competently provide the specific services needed by the user without prejudice. Typically, evaluating an agency involves the following three essential sequential phases: Submittal of basic information in accordance with the criteria of this specification to the evaluator by an agency desiring to be qualified to this standard, Evaluation of the agency-submitted information, and On-site verification of the agency-submitted information by the user or a qualified national authority.1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection of construction and materials used in construction. 1.2 Criteria is provided for evaluating the capability of agency to properly perform designated tests on construction materials, and establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency. This specification may be supplemented by more specific criteria and requirements for particular projects. 1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying and/or accrediting agencies, public or private, engaged in the testing and inspection of construction and materials. Building officials can use Specification E329 as a tool in the qualification and establishment of competency of inspection and testing agencies in the fields covered by Specification E329. 1.4 A certificate of accreditation, including the scope of accreditation, is required to comply with this standard. 1.5 The users of an accredited agency must review the agency''s scope of accreditation to ensure the agency has been accredited for its technical competence to perform the specific tests or inspections requested by the user.

Standard Specification for Agencies Engaged in Construction Inspection and/or Testing

ASTM E699-09 对从事检验、质量保证和评定建筑物构件的机构进行评价的标准实施规范

This practice provides basic criteria for evaluating the qualifications of agencies utilizing the test methods promulgated by ASTM in Section 4, Construction, of the Annual Book of ASTM Standards. The existence of a formal accrediting authority such as a federal, state, municipal, or nongovernmental body is not necessary for the use of this practice. These criteria may be supplemented by more specific criteria for particular classes of testing, quality assurance, and evaluative agencies. Specification E 329 can be used for on-site construction projects. The intent of this practice is to provide a “consensus-system” standardized basis for evaluating a testing, quality assurance, or evaluating agency with respect to its capability to provide the specific service(s) needed by the user without prejudice to the agency offering other services or being affiliated with other agencies or organizations. In those situations where a strict literal interpretation of the phrase “shall be made available,” as used in this practice, would be inordinately burdensome to an agency, it will generally be sufficient that the agency concerned has the information available for “on-site” review. The criteria of this practice are described in terms of the basic information necessary for an accrediting authority to evaluate the capability, with respect to objectivity, and competency of a testing, quality assurance, and evaluating agency regarding common characteristics pertaining to the organization, human resources, material resources, and quality systems employed by the agency in performing the services offered. Typically, accreditation of an agency involves the following three essential phases: Submittal, to an involved accrediting authority, of basic information in accordance with the criteria of this practice by an interested agency. Evaluation of the agency-submitted information by the involved accrediting authority. Verification, “on-site,” of the agency-submitted information by the respresentative(s) of the involved accrediting authority. Although three categories are presented, an agency may provide one or any combination of these categories for which it can qualify. An agency requesting qualification under more than one category must satisfy the criteria for each category for which acceptability is desired. The criteria set forth herein represent areas upon which agreement can be reached. There may be other areas to be given consideration which may be of importance to the user. The user should include such other areas as a part of its own criteria. This practice represents minimum criteria necessary to perform, monitor, or evaluate the test results of those standards promulgated by ASTM Committee E-6. It is anticipated that the ultimate user of this practice will have the expertise necessary to exercise good judgment in the areas of human resources, physical resources, and quality systems of the agency being evaluated. Note 18212;For example, when judging the qualifications of the various individuals in a particular agency, related factors or alternative resources (such as mechanical, electrical, or electronic equipment used to aid, control, or monitor the work of the personnel) should be considered when assessing the overall qualifications of such individuals. The job experience and the reliability of the individual should also be considered in the judgment, where applicable. When assessing the organization and the resources of a particular agency, the ju......

Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

SANS 2001-BS1:2008 建设工程.第BS1部分:场地清理

Establishes construction requirements for the removal of vegetation and surface and subsurface obstructions from any construction site, the clearing out of existing hydraulic structures and the improvement of sight distances on roadways.

Construction works Part BS1: Site clearance

SANS 2001-BE1:2008 建设工程.第BE1部分:土木工程(普通)

Establishes construction requirements for the excavation, filling, compaction and finishing of general excavations for buildings, bridges and structures, terracing, landscaping and private railway sidings, carried out with heavy construction equipment or

Construction works Part BE1: Earthworks (general)