P10 工程勘察与岩土工程综合 标准查询与下载



共找到 137 条与 工程勘察与岩土工程综合 相关的标准,共 10

Technical specification for pre-stressed concrete pipe pile foundation

ICS
93.020
CCS
P10
发布
2008-08-11
实施
2008-10-01

本标准规定了水电水利工程岩体应力的测试方法和技术要求。 本标准适用于水电水利工程地基、围岩、边坡的岩体应力状态测试。

Code for rock mass stress measurements of hydroelectric and water conservancy engineering

ICS
27.140
CCS
P10
发布
2007-07-20
实施
2007-12-01

本标准规定了水电水利工程岩体基本性质试验的方法和技术要求。 本标准适用于水电水利工程测定地基、围岩、边坡、填筑料等岩体基本性质的室内和现场试验,以及对施工质量的控制和检验。

Code for rock tests of hydroelectric and water conservancy engineering

ICS
27.140
CCS
P10
发布
2007-07-20
实施
2007-12-01

本标准规定了水电水利工程岩体观测的方法和技术要求。 本标准适用于水电水利工程地基、围岩、边坡的岩体位移、 变形、应变、压力和锚杆观测,以及岩体中地下水渗透压力的观测。 本标准适用于前期阶段岩体观测、施工期安全监测、运行期长期观测。

Code for rock mass observations of hydroelectric and water conservancy engineering

ICS
27.140
CCS
P10
发布
2007-07-20
实施
2007-12-01

本标准规定了岩土化学成分分析和矿物成分分析的试验方法。 本标准适用于水电水利工程中岩石和土的化学成分和矿物成分的分析,以及岩石和土对水工建筑物腐蚀性的检验。

Code for chemical analysis tests of rock and soil for hydropower and water conservancy engineering

ICS
27.140
CCS
P10
发布
2006-12-17
实施
2007-05-01

本规程适用于岩土体的剪切试验,可分为在垂直压应力作用下的抗剪断试验和残余抗剪试验。

Specification for field direct shear test of rock and soil mass

ICS
93.020
CCS
P10
发布
2006-10-04
实施
2007-04-01

本标准规定了水电水利工程水库区及规划移民区工程地质勘察的内容、方法和技术要求。 本标准适用于大型水电水利工程水库区的工程地质勘察。水库区地质条件复杂的中型水电工程可参照执行。

Technical code of reservoir area engineering geological investigation for hydropower and water resources peoject

ICS
27.140
CCS
P10
发布
2006-05-06
实施
2006-10-01

本标准规定了水电水利工程区域构造稳定性勘察的内容、技术要求和评价标准。 本标准适用于大型水电水利工程的区域构造稳定性勘察工作。区域构造复杂的中型水电工程可参照执行。

Technical code of regional tectonic stability investigation for hydropower and water resources projtct

ICS
27.140
CCS
P10
发布
2006-05-06
实施
2006-10-01

本标准规定了水电水利工程边坡工程地质勘察的内容、技术要求和方法。 本标准适用于大型水电水利工程边坡工程地质勘察。地质条件复杂的中型水电水利工程边坡的工程地质勘察可参照执行。

Technical code for engineering geological investigation of slope for hudropower and water resources project

ICS
27.140
CCS
P10
发布
2006-05-06
实施
2006-10-01

本标准规定了水电水利工程喀斯特工程地质勘察的内容、技术要求和方法。 本标准适用于碳酸盐喀斯特地区的大型水电水利工程的工程地质勘察,不包括硫酸盐岩、卤素岩喀斯特的工程地质勘察。地质条件复杂的碳酸盐岩喀斯特地区中型水电水利工程可参照执行。

Technical code of karst engineering geological investigation for hydropower and water resources project

ICS
27.140
CCS
P10
发布
2006-05-06
实施
2006-10-01

This part of ISO 14688, together with ISO 14688-1, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. The relevant characteristics may vary and therefore, for particular projects or materials, more detailed subdivisions of the descriptive and classification terms may be appropriate. Identification and description of soil are covered by ISO 14688-1. The classification principles established in this part of ISO 14688 permit soils to be grouped into classes of similar composition and geotechnical properties and, with respect to their suitability for geotechnical engineering purposes, such as — foundations, — ground improvements, — roads, — embankments, — dams, and — drainage systems. This part of ISO 14688 is applicable to natural soil and similar man-made material in situ and redeposited, but it is not a classification of soil by itself. Identification and description of rock are covered by ISO 14689-1.

Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification

ICS
93.020
CCS
P10
发布
2004-07
实施

本标准适用于油气田和管道工程可行性研究勘察、初步勘察、详细勘察各阶段的岩土工程勘察文件的编制;在进行其他行业的勘察时,应符合现行国家标准的规定。未涉及部分,应执行相关行业标准。

Charting standard for investigation of geotechnical engineering

ICS
93.020
CCS
P10
发布
2003-03-18
实施
2003-08-01

Geotechnical investigation and testing - Identification and classification of soil - Identification and description

ICS
13.080.05;93.020
CCS
P10
发布
2002-09-30
实施
2002-09-30

Roches - Détermination de la vitesse de propagation des ondes ultrasonores en laboratoire - Méthode par transparence

ICS
93.020
CCS
P10
发布
2002-04-01
实施
2002-04-05

この規格は,オランダ式二重管コーン貫入試験機を用いて,原位置における土の硬軟,締まり具合又は土層の構成を判定するためのコーン貫入抵抗を求めろ貫入試験方法について規定する。

Method for Dutch double-tube cone penetration test

ICS
13.080.20;93.020
CCS
P10
发布
2001-06-12
实施

この規格は,原位置の±のCBRを求める試験方法について規定する。また,この試験は,安定処理した±にも適用できる。

Test method for the California Bearing Ratio (CBR) of soils in place

ICS
13.080.20;93.020
CCS
P10
发布
2001-06-12
实施

This British Standard describes a method for determining the concentration of coal tar-derived phenols, namely catechol, resorcinol, phenol, cresols (ortho-, meta-, para-), xylenols (2,3; 2,4; 2,5; 2,6; 3,4 and 3,5); 2-isopropylphenol, 1-naphthol and 2,3,5 trimethylphenol. It is applicable to all types of soil containing concentrations of phenols in the approximate range 0.02 mg/kg to 10 mg/kg soil. Some performance characteristics of the method are summarized in annex A. The method is not applicable to the determination of halogenated phenols. The range can be extended by suitable dilution of the extracts as required.

Soil analysis - Method for determination of coal tar-derived phenolic compounds

ICS
13.080.10
CCS
P10
发布
2000-04-15
实施
2000-04-15

In general this test method is adapted from tests developed for woven fabrics (previously designated as Test Method D 1388). The cantilever test method may not be suitable for testing products that are very limp or have a marked tendency to curl or twist at a cut edge.1.1 This test method covers the determination of the stiffness of geosynthetics used as Turf Reinforcement Mats (TRM).1.2 The method is applicable to TRMs of any fiber content and any number of components.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

ICS
65.020.20 (Plant growing)
CCS
P10
发布
2000
实施

1.1 This test method is described for determining the stiffness of geosynthetics used as Turf Reinforcement Mats (TRM).1.2 The method is applicable to TRMs of any fiber content and any number of components.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM''s)

ICS
65.020.20 (Plant growing)
CCS
P10
发布
2000
实施

Technical rule of data processing for investigation of geotechnical engineering for fossil fuel power plants

ICS
93.020
CCS
P10
发布
1999-08-02
实施
1999-10-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号