P27 组合结构工程 标准查询与下载

JTS 153-2-2012 海港工程钢筋混凝土结构电化学防腐蚀技术规范

1.0.1为统一海港工程钢筋混凝土结构电化学防腐蚀设计、施工、检验和维护的技术要求,提高钢筋混凝土结构的耐久性,制定本规范。1.0.2本规范适用于海港工程钢筋混凝土结构的阴极保护、电化学脱盐和电沉积等电化学防腐蚀的设计、施工、检验和维护。1.0.3海港工程钢筋混凝土结构的电化学防腐蚀设计、施工、检验和维护除应符合本规范规定外,尚应符合国家现行有关标准的规定。

Technical Specification for Electrochemical Anticorrosion of Reinforcement Concrete Structures in Harbour and Marine Engineering

JGJ/T 273-2012 钢丝网架混凝土复合板结构技术规程

本规程适用于8度及8度以下抗震设防区以及非抗震设防区的多层民用建筑。

Technical specification for wire grids concrete composite slab structure

JGJ/T 219-2010 混凝土结构用钢筋间隔件应用技术规程

本规程适用于建筑工程与市政工程混凝土结构中使用的钢筋间隔件的制作、运输、储存和安放。

Technical specification for application of reinforcement spacings used in concrete structures

DIN EN 1994-1-2:2010 欧洲规范4:复合钢和混凝土结构的设计.第1-2部分:一般规则.结构防火设计;德文版本EN 1994-1-2-2005 + AC-2008

This part 1-2 of EN 1994 deals with the design of composite steel and concrete structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1994-1-1 and EN 1991-2-2. This Part 1-2 only identifies differences from, or supplements to, normal temperature design.

Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1994-1-2:2005 + AC:2008

DIN EN 1994-1-1/NA:2010 国家附录.国家制定参数.欧洲法规4:复合钢和混凝土结构的设计.第1-1部分:一般规则和建筑物规则

National Annex - Nationally determined parameters - Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings

DIN EN 1994-1-2/NA:2010 国家附录.国家制定参数.欧洲法规4:复合钢和混凝土结构的设计.第1-2部分:一般规则.防火结构设计

National Annex - Nationally determined parameters - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design

DIN EN 1994-1-1:2010 欧洲法规4:复合钢和混凝土结构的设计.第1-1部分:一般规则和建筑物规则.德文版本EN 1994-1-1-2004 + AC-2009

Eurocode 4 applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceabiltiy of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.

Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004 + AC:2009

DIN EN 1994-2:2010 欧洲法规4:复合钢和混凝土结构的设计.第2部分:通用规则和桥用规则.德文版本EN 1994-2-2005 + AC-2008

Eurocode 4 applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceability of strucures, the basis of their design and verification that are given in EN 1990: 2002 - Basis of structural design.

Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005 + AC:2008

DIN EN 1994-2/NA:2010 国家附录.国家制定参数.欧洲规范4:复合钢和混凝土结构的设计.第2部分:一般规则和桥梁用规则

National Annex - Nationally determined parameters - Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges

CECS 52-2010 整体预应力装配式板柱结构技术规程

整体预应力装配式板柱结构,适用于成片开发的商住楼、民居,体型比较规则的写字楼、科研实验楼、商业楼、图书馆、餐厅、宾馆、展览厅,以及一般多层工业厂房、仓库及停车库等。

Technical specification for integral prefabricated prestressed concrete slab-column structure

JGJ/T 211-2010 建筑工程水泥-水玻璃双液注浆技术规程

本规程适用于以水泥-水玻璃(C-S)为注浆浆液,实施软弱地层加固、注浆堵水防渗等建筑工程双液注浆的设计、施工和验收。

Technical specification for cement-silicate grouting in building engineering

JGJ/T 199-2010 型钢水泥土搅拌墙技术规程

本规程适用于填土、淤泥质土、黏性土、粉土、砂性土、饱和黄土等地层建筑物(构筑物)和市政工程基坑支护中型钢水泥土搅拌墙的设计、施工和质量检查与验收。对淤泥、泥炭土、有机质土以及地下水具有腐蚀性和无工程经验的地区,必须通过现场试验确定其适用性。

Technical specification for soil mixed wall

ASTM C955-10 用于石膏板制品和金属熟石膏基板的螺钉用承重(横向及轴向)钢螺栓,滑槽(轨道),支撑件或搁栅撑的标准规格

1.1 This specification covers steel studs, runners (tracks), and bracing or bridging (with a base metal thickness range of not less than 0.0329 in. (0.836 mm)) for screw application of gypsum panel products and metal plaster bases in load-bearing (transverse and axial) construction assemblies. Steel of lesser thickness shall be permitted in additional engineered products. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

DIN EN 1994-1-1 Berichtigung 1:2009 欧洲法规4:复合钢和混凝土结构的设计.第1-1部分:建筑物用规则和一般规则.技术勘误DIN EN 1994-1-1-2006

Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004, Corrigendum to DIN EN 1994-1-1:2006-07; German version EN 1994-1-1:2004/AC:2009

NA to BS EN 1994-1-1-2004 欧洲法规4的英国国家附录.复合钢和混凝土结构的设计.通用规则和建筑物用规则

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1994-1-1:2004. • 2.4.1.1(1) • 2.4.1.2(5) • 2.4.1.2(6) • 2.4.1.2(7) • 3.1(4) • 3.5(2) • 6.4.3(1)(h) • 6.6.3.1(1) • 6.6.3.1(3) • 6.6.4.1(3) • 6.8.2(1) • 6.8.2(2) • 9.1.1(2) • 9.6(2) • 9.7.3(4) • 9.7.3(8) • 9.7.3(9) • B.2.5(1) • B.3.6(5) b) the UK decisions on the status of BS EN 1994-1-1:2004 informative annexes; and c) references to non-contradictory complementary information.

UK National Annex to Eurocode 4: Design of composite steel and concrete structures – Part 1-1: General rules and rules for buildings

NA to BS EN 1994-1-2-2005 欧洲法规4的英国国家附录.复合钢和混凝土结构的设计.通用规则.结构防火设计

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1994-1-2:2005. • 1.1(16) • 2.1.3(2) • 2.3(1)P • 2.3(2)P • 2.4.2(3) • 3.3.2(9) • 4.1(1)P • 4.3.5.1(10) b) the UK decisions on the status of BS EN 1994-1-2:2005 informative annexes; and c) references to non-contradictory complementary information.

UK National Annex to Eurocode 4: Design of composite steel and concrete structures – Part 1-2: General rules – Structural fire design

NA to BS EN 1994-2-2005 欧洲法规4的英国国家附录:复合钢和混凝土结构的设计.第2部分:通用规则和桥用规则

This National Annex has been prepared by BSI Subcommittee B/525/4, Composite structures. In the UK it is to be used in conjunction with BS EN 1994-2:2005.

UK National Annex to Eurocode 4: Design of composite steel and concrete structures – Part 2: General rules and rules for bridges

BS PD 6696-2:2007 BS EN 1994-2的背景文件和BS EN 1994-2的英国国家附录

This Published Document contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1994-2:2005 and its UK National Annex. This published document gives information and guidance on the design of components of composite steel and concrete bridges; it does not cover assessment. This Published Document does not fully cover cable-supported bridges. This Published Document does not cover the detailing of components for seismic design or the design of parapets, safety fences and other ancillary items.

Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2

DB13(J) 43-2006 CL结构设计规程

CL结构体系是一种新型的保温隔热复合钢筋混凝土剪力墙结 构体系，由CL墙板、实体剪力墙等组成。该体系具有保温节能、 自重轻、抗震性能好、经济合理、技术先进等优点。现已通过建 设部科技成果鉴定，其综合技术达国际先进水平。 本规程是在做了大量试验工作和在青岛、邯郸、石家庄、邢 台等地完成了近100万平方米住宅设计与施工的基础上，根据国家 新的建筑节能要求，对《CL结构设计规程》DB13(J)43-2003 进行了必要的补充和调整。其主要内容是对CL结构的材料、设计 理论、设计构造措施等分别作出了系统的规定。CL结构可用于非抗震设防区及8度和8度以下抗震设防地 区的住宅建筑和纵横墙较多的公共建筑。

CL Structural Design Regulations

BS 5400-2:2006 钢、混凝土和混合结构桥.荷载规范

1.1 General This Standard specifies the loading to be used for the design of highway and railway bridges and associated structures. Additional requirements for the design of highway structures are included in the Design Manual for Roads and Bridges, published by The Stationery Office Ltd. Any additional requirements are to be agreed with the relevant authority. 1.2 Documents comprising this British Standard This specification for loads forms a part of a series of standards that deal with the design, materials and workmanship of steel, concrete and composite bridges (see Foreword). 1.3 Loads and factors specified in this Part of BS 5400 This Part of BS 5400 specifies nominal loads and their application, together with the partial factors, ?fL, to be used in deriving design loads. The loads and load combinations specified are for highway, railway and foot/cycle track bridges in the United Kingdom. Where different loading standards apply, modifications might be necessary. 1.4 Wind and temperature Wind and temperature effects relate to conditions prevailing in the United Kingdom. If the requirements of this part of BS 5400 are applied outside this area, relevant local data should be adopted.

Steel, concrete and composite bridges - Specification for loads