P27 组合结构工程 标准查询与下载

BS 5400-5:2005 钢、混凝土及混合结构桥.混合结构桥设计规则

BS 5400-5 is part of a large series of standards concerning the design and construction of bridges. This part makes recommendations for design of bridges that use a composite construction (e.g. employing concrete slabs acting compositely with structural

Steel, concrete and composite bridges - Code of practice for design of composite bridges

DB13(J) 44-2003 CL结构工程施工质量验收规程

本规程是根据河北省建设厅冀建质[2003]54号文的要求，由河 北中原工程项目管理有限公司等单位编制的。 本规程在编制过程中，编制组进行了广泛、深人的调查研究， 总结了近年来CL结构工程施工质量验收的经验，坚持了“验评分 离、强化验收、完善手段、过程控制”的指导思想，广泛征求了有 关单位的意见，最后经审查定稿。 本规程编制依据为《建筑工程施工质量验收统一标准》GB50300 -2001和《混凝土结构工程施工质量验收规范》GB50204-20020 本规程仅就CL结构工程的特殊部分-CL墙体工程的施工 质量验收做了规定，内容主要包括:CL预制板制作，CL预制板安 装，CL墙体钢筋，CL墙体模板，CL墙体现浇混凝土等分项工程 施工质量验收的标准、内容和程序。本规程仅适用于CL结构建筑工程的特殊工程部分-CL墙 体工程的施工质量验收。其它部分，如:基础、普通混凝土结构、 砌体结构、屋面、装饰装修等工程，仍执行国家现行相应工程的施 工质量验收规范及标准。

CL Structural Engineering Construction Quality Acceptance Regulations

JG/T 161-2004 无粘结预应力钢绞线

Unbonded prestressing steel strand

JG 161-2004 无粘结预应力钢绞线

本标准规定了无粘结预应力钢绞线产品的标记、要求、测试方法、检验规则以及标志、包装、运输、贮存。 本标准适用于后张预应力混凝土结构中使用的无粘结预应力钢绞线。

Unbonded prestressing steel strand

ASTM C1504-04(2010) 涵洞和雨水管用预制钢筋混凝土三边结构制造的标准规范

1.1 This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2 A complete metric companion to Specification C1504 has been developedC1504M; therefore, no metric equivalents are presented in this specification. Note 18212;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the geometric section specified and provide for inspection at the construction site. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

ASTM C1504M-04(2010) 涵洞和雨水管用预制钢筋混凝土三边结构制造的标准规范［米制］

1.1 This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2 This specification is the metric counterpart of Specification C1504; therefore, no imperial equivalents are presented in this specification. Note 18212;This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that he must properly correlate the loading conditions and the field requirements with the geometric section specified and provide for inspection at the construction site. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

DD ENV 1994-2-2002 欧洲规程4:复合钢和混凝土结构设计.复合材料桥(结合英国国家应用文件一起使用)

To be read in conjunction with ENV 1994-2:1997

Eurocode 4: design of composite steel and concrete structures. Composite bridges (together with United Kingdom National Application Document)

JGJ 138-2001 型钢混凝土组合结构技术规程

Technical specification for steel reinforced concrete composite structures

BS 5400-3:2000 钢、混凝土及混合结构桥.钢桥设计的实施规程

This part of BS 5400 gives recommendations for the design of structural steelwork in bridges. After stating general recommendations, procedures are given for the design of steelwork components, assemblies and connections. Such procedures are applicable to steelwork which is to be fabricated and erected in accordance with BS 5400-6. Recommendations for design against fatigue are contained in BS 5400-10. Recommendations for design of concrete components and shear connectors for their interaction with steelwork are contained in BS 5400-5. The partial factors of safety given are appropriate only for bridges designed to this standard. Hybrid construction, using materials of different yield stress, is not generally within the scope of this part of BS 5400. Parapets, safety fences and other ancillary items are not within the scope of this part of BS 5400.

Steel, concrete and composite bridges - Code of practice for design of steel bridges

DL/T 5085-1999 钢-混凝土组合结构设计规程

Code for design of steel-concrete composite structure

JG/T 3060-1999 组合钢模板

本标准规定了组合钢模板的定义、分类、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于工业与民用建筑现浇混凝土用组合钢模板。

Composite steel formwork

DB50/T 5007-1999 钢丝网架水泥聚苯乙烯夹芯板工程施工及验收规程

为了在钢丝网架水泥聚苯乙烯夹芯板工程施工和验收中，做到技术先进、确保质量、安全适用、经济合理，特制定本规程。本规程适用于一般工业与民用建筑的非承重墙、屋面板的施工及验收。

Specification for construction and acceptance of steelwire-fabric cement polystyrene slab

ASCE 23-97-1999 结构钢梁规范

This SpeciJicatìon for Structural Steel Beams with Web Openings supplements the Load and Resistance Factor Design Specification for Sfructural Steel Buildings of the American Institute of Steel Construction. This Specification applies to both composite and noncomposite flexural members in which the steel section meets the requirements of a compact section.

Specification for Structural Steel Beams with Web Openings

JGJ/T 114-1997 钢筋焊接网混凝土结构技术规程

Technical Specification for Concrete Structures Reinforced with Welded Steel Fabric

CECS 88-1997 钢筋混凝土承台设计规程

本规程系根据国家标准《建筑结构设计统一标准》GBJ 68的基本原则制定，符号、计量单位和基本术语系按照国家标准《建筑结构设计通用符号、计量单位和基本术语》GBJ 83的规定采用。

Specification for design of reinforced concrete pile caps

DD ENV 1994-1-1-1994 欧洲法规4:复合钢和混凝土结构设计.总则和建筑物规则(含英国国家应用文件)

General basis for the design of composite structures and members for buildings and civil engineering works. Detailed rules for composite slabs, beams, columns and frames which are mainly applicable to bridges are also given.

Eurocode 4: design of composite steel and concrete structures. General rules and rules for buildings (together with United Kingdom National Application Document)

CECS 52-1993 整体预应力装配式板柱建筑技术规程

本规程适用于建筑高度不超过50m、抗震设防烈度不超过8度（Ⅰ、Ⅱ、Ⅲ类场地土）矩形柱网的整体预应力装配式板柱建筑。

TECHNICAL CODE FOR COLUMNSLAB BUILDING ASSEMBLED BY MONOLITHIC PRESTRESSING

CECS 43-1992 钢筋混凝土装配整体式框架结点与连接设计规程

本规程适用于非地震区及抗震设防烈度为6~8度地区的丙类及丙类以下的钢筋混凝土装配整体式房屋。

DESIGN SPECIFICATION FOR JOINTS AND CONNECTIONS OF PRECAST MONOLITHIC REINFORCED CONCRETE FRAMES

CECS 39-1992 钢筋混凝土深梁设计规程

本规程适用于工业与民用房屋和一般构筑物中以承受竖向静力荷载为主的深梁设计。水利、港口等工程结构中的深梁设计可参照使用。 本规程根据《建筑结构设计统一标准》GBJ 68-1984的原则和《建筑结构设计通用符号、计量单位和基本术语》GBJ 83-1985的规定编制。

SPECIFICATION FOR DESIGN OF REINFORCED CONCRETE DEEP BEAMS

BS 5400-4:1990 钢、混凝土及混合结构桥.第4部分:混凝土桥设计惯例

Objectives and requirements of design, and particular recommendations for reinforced concrete, prestressed concrete and composite concrete construction.

Steel, concrete and composite bridges - Code of practice for design of concrete bridges