P45 供热、供气、空调及制冷工程综合 标准查询与下载



共找到 220 条与 供热、供气、空调及制冷工程综合 相关的标准,共 15

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2008+A2:2012

ICS
01.040.27;27.080;27.200
CCS
P45
发布
2012-08
实施
2012-08-01

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovey; German version EN 378-4:2008+A1:2012

ICS
27.080;27.200
CCS
P45
发布
2012-08
实施
2012-08-01

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2008+A1:2012

ICS
27.080;27.200
CCS
P45
发布
2012-08
实施
2012-08-01

本标准规定了炊用燃气大锅灶的术语和定义,分类和型号,结构和材料,性能要求,试验方法,检验规则,标识、警示和说明书,包装、运输和贮存。 本标准适用于单个灶眼额定热负荷不大于80 kW、锅的公称直径不小于600 mm的炊用燃气大锅灶(以下简称大锅灶)。

Commercial gas oven for cooking

ICS
91.140
CCS
P45
发布
2012-02-29
实施
2012-08-01

本标准规定了家用燃气用具电子式燃气与空气比例调节装置的术语和定义、缩略语、结构和材料、要求、试验方法、检验规则、标识、安装和操作说明书以及包装、运输和贮存。 本标准适用于最大工作压力在10kPa以下、公称直径不大于DN50、使用GB/T 13611规定的城镇燃气器具用、闭环控制的能被单独测试或作为燃气用具(或燃烧器)部件进行测试的家用燃气用具电子式燃气与空气比例调节装置。

Electronic gas/air ratio adjustment devices for household gas appliances

ICS
91.140
CCS
P45
发布
2012-02-29
实施
2012-08-01

本标准规定了家用燃气器具旋塞阀总成(以下简称阀总成)的术语和定义,分类,要求,试验方法,检验规则,标识和使用说明,包装、运输和贮存。 本标准适用于标明最大工作压力在10 kPa以下,公称尺寸不大于DN25,使用GB/T 13611规定的城镇燃气器具上的旋塞阀总成。

Cock assembly for domestic gas appliance

ICS
91.140
CCS
P45
发布
2012-02-09
实施
2012-08-01

本标准规定了集成灶的术语和定义、分类和型号、要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于使用GB/T 13611规定燃气且单个燃烧器额定热负荷不大于5.23 kW带有排风装置的集成式燃气灶具。 本标准不适用于移动运输交通工具中使用的集成灶。

Integration cooking appliances

ICS
99.140
CCS
P45
发布
2012-02-08
实施
2012-05-01

Residential HVAC System Zoning

ICS
91.140.10;91.140.30
CCS
P45
发布
2012
实施

本标准规定了电热地暖系统安全与节能的范围、规范性引用文件、术语与定义、分类、安全要求、节能措施。 本标准适用于以电为热源,通过发热电缆、电热膜、碳纤维等电热产品将电能转换为热能后,实现冬季室内供暖的电热地暖系统。

Safety and Energy Saving Specifications for Electric Floor Heating System

ICS
91.140.01
CCS
P45
发布
2011/11/15
实施
2011/11/15

Refrigerating systems and heat pumps - Test method of equipments for recovery, recycling and reclaim of refrigerants used in refrigerating systems and heat pumps.

ICS
27.200
CCS
P45
发布
2011-09-01
实施
2011-09-30

Water based surface embedded heating and cooling systems - Part 1 : definitions and symbols.

ICS
01.040.91;01.075;91.140.10
CCS
P45
发布
2011-09-01
实施
2011-09-30

本规程适用于采暖通风与空气调节工程中基本技术参数性能指标测试,以及采暖、通风、空调、洁净、恒温恒湿工程的试验、试运行及调试的检测。

Technical specification for test of heating & ventilating and air-conditioning engineering

ICS
CCS
P45
发布
2011-08-29
实施
2012-04-01

Centralized air-conditioning (central air-conditioning) system energy-saving evaluation value and its calculation method

ICS
11
CCS
P45
发布
2011-04-11
实施
2011-04-11

This European Standard specifies the requirements relating to safety of persons and property (but not goods in storage) and the local and global environment for: a) stationary and mobile refrigerating systems of all sizes, including heat pumps; b) secondary cooling or heating systems; c) location of these refrigerating systems. This European Standard is not applicable to refrigerating systems with air or water as refrigerant. This European Standard is applicable to new refrigerating systems and modification of existing refrigerating systems in case the type of refrigerant changed or pressure vessels are replaced. The part dealing with maintenance, repair, operation, recovery, reuse and disposal also applies to existing systems. Parties responsible for existing refrigerating systems should consider the safety and environmental aspects of this European Standard and implement the more stringent requirements so far as they are reasonably practicable. Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2008+A1:2010

ICS
01.040.27;27.080;27.200
CCS
P45
发布
2011-03
实施
2011-03-01

本标准规定了城市轨道交通车辆空调、采暖及通风装置的使用环境、车辆空调、采暖性能、空调机组、新风及排气、紧急通风、采暖装置、控制及保护和系统的测试等要求。 本标准适用于城市轨道交通车辆空调、采暖及通风装置。

Technical specifications of heating ventilating and air conditioning for vehicles of urban rail transit vehicles

ICS
CCS
P45
发布
2010-10-21
实施
2011-05-01

本标准规定了混空轻烃燃气的要求、试验方法、检验规则。 本标准适用于城镇居民生活、商业和工业企业使用的混空轻烃燃气。

Air-light hydrocarbon mixing gas

ICS
75.160.30
CCS
P45
发布
2010-07-29
实施
2011-01-01

本标准规定了加热生活用水的冷凝式家用燃气快速热水器的分类和型号、材料和结构、要求、试验方法、验收规则及标志和说明书、包装、运输和贮存。 本标准适用于除人工煤气之外符合GB/T 13611规定燃气、额定热输入不大于70kW的强制排气式冷凝热水器、强制给排气式冷凝热水器和室外型冷凝热水器。

Condensing domestic gas instantaneous water heaters

ICS
91.140.99
CCS
P45
发布
2010-05-18
实施
2010-12-01

本标准规定了燃气用具连接用不锈钢波纹软管的产品分类、规格及型号编制、要求、试验方法、检验规则、标志、包装、运输、和贮存。 本标准适用于公称尺寸DN≤N32,公称压力PN≤0.01MPa固定安装的燃气灶具、燃气热水器和燃气表等与燃气管道连接用软管。

Stainless steel corrugated tubes for the connection of gas appliances

ICS
91.140.99
CCS
P45
发布
2010-05-18
实施
2010-12-01

This part 3 of EN 378 is applicable to the installation site (plant space, services and necessary personal protective equipment.) It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2008, Corrigendum to DIN EN 378-3:2008-06

ICS
27.080;27.200
CCS
P45
发布
2010-01
实施

This European Standard relates to safety and environmental requirements in the design, construction, manufacture, installation, operation, maintenance, repair and disposal of refrigerating systems and appliances in respect to the local and global environments, but not to the final destruction of the refrigerants.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2008, Corrigendum to DIN EN 378-1:2008-06

ICS
01.040.27;27.080;27.200
CCS
P45
发布
2010-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号