P96 作业设备与仪器仪表 标准查询与下载

JT/T 678-2007 车载式路面激光视频病害检测系统

本标准规定了车载式路面激光视频病害检测系统（以下简称激光视频病害检测系统）的工作原理与结构，技术要求，试验方法，检验规则，标志、包装、运输和贮存等内容。 本标准适用于应用激光技术、高速数字成像技术和计算机技术检测公路路面病害状况的激光视频病害检测系统的生产、检验和使用。

Vehicle bearing road laser video distress detecting system

JT/T 677-2007 车载式路面激光车辙仪

本标准规定了车载式路面激光车辙仪（以下简称激光车辙仪）的产品工作原理与结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术、高速数字成像技术和计算机技术检测公路路面车辙状况的激光车辙仪的生产、检验和使用。

Vehicle bearing road laser rut-meter

JT/T 676-2007 车载式路面激光平整度仪

本标准规定了车载式路面激光平整度仪（以下简称激光平整度仪）的产品工作原理与结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术和计算机技术检测公路路面平整度状况的激光平整度仪的生产、检验和使用。

Vehicle bearing road laser profilometer

BS EN 14975:2006+A1:2010 阁楼梯子.要求,标记和测试

This European Standard specifies terms and definitions, product requirements and test methods for the construction and performance of loft ladders.

Loft ladders. Requirements, marking and testing

ANSI A14.1-2007 梯子.木材.安全要求

This standard prescribes rules and establishes minimum requirements for the construction, testing, care and use of the common types of portable wood ladders described herein in order to ensure safety under normal conditions of usage. It does not cover st

Ladders - Wood - Safety Requirements

NF E85-200:2006 家用脚手架.最低安全要求

Domestics scaffoldings - Minimum safety requirements.

BS EN 74-1:2005 脚手架和支撑架用联接件、定位销和底板.第1部分:管用联接件.要求和试验方法

This European Standard specifies, for right angle couplers, swivel couplers, sleeve couplers and parallel couplers working by friction:  materials;  design requirements;  strength classes with different structural parameters including values for resistance and stiffness;  test procedures;  assessment; and gives  recommendations for ongoing production control. For testing, screw couplers are tightened to a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow.

Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures

JIS A 8960 ERRATUM 1:2006 勘误

ERRATUM

JT/T 658-2006 核子密湿度仪

本标准规定了核子密湿度仪（以下简称核子仪）的分类与结构、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于交通行业生产和使用的核子密湿度仪。

Nuclear density and moisture gauge

DIN 19555 Berichtigung 1:2006 单行安装的阶梯脚扣.镶嵌在混凝土中的阶梯脚扣.DIN 19555-2003的勘误

This document describes step for single-line installations, for setting in concrete, for example manholes of the canalization.

Step irons for single-line installation - Step irons for setting in concrete, Corrigenda to DIN 19555:2003-04

JT/T 653-2006 道路石油沥青针入度试验仪

本标准规定了道路石油沥青针入度试验仪（以下简称沥青针入度仪）的产品分类与结构、技术要求、实验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于测定道路石油沥青针入度指数的各种沥青针入度仪的生产和检验。

The penetration test apparatus of petroleum bituminous for road

DIN 4420-3:2006 作业防护脚手架. 第3部分: 选用的脚手架结构和其基本型式

Service and working scaffolds - Part 3: Selected types of scaffolding constructions and their basic versions

ASTM E2265-06 混凝土和砖石工程用锚固件和紧固件的标准术语

1.1 This document covers standard terminology for anchors and fasteners installed in structural members made of concrete or masonry.1.2 This terminology does not cover terms relating to the mechanical properties of the materials used for fabricating anchors, nor does it cover their use.1.3 The terms are listed alphabetically. Compound terms appear in the natural spoken order.

Standard Terminology for Anchors and Fasteners in Concrete and Masonry

ASME A120.1-2006 建筑物维护用动力升降工作台、移动梯和构架的安全要求

This Standard establishes safety requirements for powered platform (scaffolds) for buildings where window cleaning and related services are accomplished by means of suspended equipment at heights in excess of 35 ft (11 m) above a safe surface (e.g., grade, street, floor, or roof level). Additionally, this Standard establishes safety requirements for permanent traveling ladders and gantries (TLG). It pertains to either permanently installed or transportable equipment meeting the requirements of this Standard. Powered platforms and TLGs may be used or operated by one or more persons engaged in services such as normal building maintenance. The equipment may also be used for tasks such as caulking, metal polishing, reglazing, or other building repairs. This Standard does not apply to other suspended powered platforms used for remedial renovations or modifications to buildings. The safe use of these scaffolds is included in ANSI A10.8-2001, Safety Requirements for Scaffolding. This Standard does not relate to any service performed by persons supported by equipment covered by any of the ANSI A92 standards.

Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance

ASTM E2265-06a 混凝土和砖石工程用锚固件和紧固件的标准术语

1.1 This document covers standard terminology for anchors and fasteners installed in structural members made of concrete or masonry.1.2 This terminology does not cover terms relating to the mechanical properties of the materials used for fabricating anchors, nor does it cover their use.1.3 The terms are listed alphabetically. Compound terms appear in the natural spoken order.

Standard Terminology for Anchors and Fasteners in Concrete and Masonry

ASTM E2265-06b 混凝土和砖石工程用锚固件和紧固件的标准术语

1.1 This terminology covers standard terminology for anchors and fasteners installed in structural members made of concrete or masonry.1.2 This terminology does not cover terms relating to the mechanical properties of the materials used for fabricating anchors, nor does it cover their use.1.3 The terms are listed alphabetically. Compound terms appear in the natural spoken order.

Standard Terminology for Anchors and Fasteners in Concrete and Masonry

BS 1139-6:2005 金属脚手架.在BS EN 1004范围之外(但利用该系统部件)的预制塔式脚手架规范

This part of BS 1139 specifies requirements for prefabricated mobile tower systems conforming to BS EN 1004 in the assembly of: a) access towers outside the scope of BS EN 1004; b) other configurations that also incorporate components outside the scope of BS EN 1004. These comprise high clearance towers, high level towers, linked towers, room scaffolds, cantilevered platform structures and roof scaffolds, all intended, where appropriate, for both indoor and outdoor use.

Metal scaffolding - Specification for prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems

DIN 51308:2005 建筑中应用和测量力用辅助装置的验证.夹紧装置、液压缸、夹紧工具用功率计

The verification is undertaken to ensure, whether the auxiliary devices work properly and to determine the relation between indicated and really exerting forces.#,,#

Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim

SANS 550-2:2005 木制梯子．第2部分：单面和延伸式梯

Covers specific requirements for single and extension ladders.

Wooden ladders Part 2: Single and extension ladders

SANS 550-4:2005 木制梯子．第4部分：阶梯式竖梯、平台式竖梯和台式竖梯

Covers specific requirements for step-ladders, platform ladders and shelf ladders.

Wooden ladders Part 4: Step-ladders, platform ladders and shelf ladders