P96 作业设备与仪器仪表 标准查询与下载



共找到 409 条与 作业设备与仪器仪表 相关的标准,共 28

本标准规定了车载式路面激光平整度仪(以下简称激光平整度仪)的产品结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术和计算机技术检测公路路面平整度状况的激光平整度仪的生产、检验和使用。

Vehicle bearing road laser profilometer

ICS
93.080.99
CCS
P96
发布
2009-09-17
实施
2009-12-01

本标准规定了反光膜耐弯曲性能测定器的结构、技术要求、试验方法、检验规则以及标志、包装、运输与储存。 本标准适用于公路交通标志用反光膜耐弯曲性能测定器的生产、检验和使用。

Measure for flexibility of retroreflective sheeting

ICS
93.080.99
CCS
P96
发布
2009-09-17
实施
2009-12-01

本标准规定了车载式路面激光车辙仪(以下简称激光车辙仪)的分类与结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术、数字成像技术和计算机技术检测公路路面车辙状况的激光车辙仪的生产、检验和使用。

Vehicle bearing road laser rut-meter

ICS
93.080.99
CCS
P96
发布
2009-09-17
实施
2009-12-01

本标准规定了钢网架螺栓球节点的术语和定义、标记和规格、要求、试验方法、检验规则、验收、标志、包装、运输和贮存。 本标准适用于网架和双层网壳(曲面型网架)结构的螺栓球节点零、部件产品的质量控制。

Bolted spherical node of space grid structures

ICS
CCS
P96
发布
2009-09-16
实施
2010-03-01

本标准规定了钢网架焊接空心球节点的术语和定义、标记和规格、要求、试验方法、检验规则、验收、标志、包装、运输和贮存。 本标准适用于网架、单层网壳和双层网壳(曲面型网架)结构等空间网格结构的焊接空心球节点网架零、部件产品的质量控制。

Welded hollow spherical node of space grid structures

ICS
CCS
P96
发布
2009-09-16
实施
2010-03-01

本规程适用于高层、超高层建(构)筑物不带外模板的千斤顶式或油缸式液压升降整体脚手架的设计、制作、安装、检验、使用、拆除和管理。

Technical specification for safety of hydraulic lifting integral scaffold

ICS
CCS
P96
发布
2009-09-15
实施
2010-03-01

Masonry and stone cutting-off machines for job site - Safety.

ICS
91.220
CCS
P96
发布
2009-08-01
实施
2009-08-01

Masonry and stone cutting-off machines for job site - Safety.

ICS
91.220
CCS
P96
发布
2009-08-01
实施

本标准规定了水泥安定性试验用雷氏夹和雷氏夹膨胀测定仪的结构、技术要求、试验方法、检验规则、标志及包装。 本标准适用于JTG E30-2005和JTJ 270-1998中进行水泥安定性试验用雷氏夹及雷氏夹膨胀测定仪。

Le Chatelier,Tester for determining expansion of Le Chatelier needles

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

本标准规定了李氏密度瓶(以下简称李氏瓶)的结构及尺寸、技术要求、试验方法、检验规则、标志及包装。 本标准适用于JTG E30-2005中进行水泥密度测定方法(T 0503-2005 )用李氏瓶。

Le Chatelier flask for determining density of hydraulic cement

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

本规程适用于按JTG E30-2005进行水泥胶砂流动度测定方法(T 0507-2005)试验的水泥胶砂流动度测定仪(以下简称跳桌)的首次检定、后续检定和使用中检验。

Flow Table for Determination Cement Mortar Fluidity

ICS
CCS
P96
发布
2009-07-23
实施
2009-11-01

本标准规定了用混合式气压法测定水泥混凝土拌合物含气量测定仪(以下简称测定仪)的结构与原理、技术要求、试验方法、检验规则、标志及包装。 本标准适用于JTG E30-2005中采用混合式气压法测定水泥混凝土拌合物含气量试验(T 0526-2005)的测定仪。

Air entrainment meter of freshly mixed concrete by the volumetric method

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

本规程适用于按JTG E30-2005和JTJ 270一1998进行水泥安定性试验用雷氏夹及雷氏夹膨胀测定仪的首次检定、后续检定和使用中检验。

Le Chatelier,Tester for Determination Expansion of Le Chatelier Needles

ICS
CCS
P96
发布
2009-07-23
实施
2009-11-01

本规程适用于混合式气压法测定水泥混凝土拌合物含气量的测定仪(以下简称测定仪)的首次检定、后续检定和使用中检验。

Air Entrainment Meter of Freshly Mixed Concrete by The Volumetric Method

ICS
CCS
P96
发布
2009-07-23
实施
2009-11-01

本规程适用于混凝土贯入阻力测定仪(以下简称贯入仪)的首次检定、后续检定和使用中检验。

Apparatus for Time of Setting of Concrete Mixture by Penetration Resistance

ICS
CCS
P96
发布
2009-07-23
实施
2009-11-01

本标准规定了水泥胶砂流动度测定仪(以下简称跳桌)的产品结构、技术要求、试验方法、检验规则、标志与包装。 本标准适用于JTG E30-2005中进行水泥胶砂流动度测定方法(T 0507-2005)试验的跳桌。

Flow table for determine cement mortar fluidity

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

本标准规定了水泥胶砂及混凝土耐磨性试验机(以下简称试验机)的产品结构、技术要求、试验方法、检验规则、标志与包装。 本标准适用于JTG E30一2005中进行水泥胶砂耐磨性试验(T 0510-2005)和水泥混凝土耐磨性试验(T 0567-2005)的试验机。

Apparatus of abrasion resistance for cement motar and concrete

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

本标准规定了混凝土贯入阻力测定仪(以下简称贯入仪)的分类和组成、技术要求、试验方法、检验规则、标志与包装。 本标准适用于JTG E30-2005中进行水泥混凝土拌合物凝结时间试验(T 0527-2005 )的测定仪。

Apparatus for time of setting of concrete mixture by penetration resistance

ICS
93.080.99
CCS
P96
发布
2009-07-23
实施
2009-11-01

Mobile elevating work platforms - Symbols for operator controls and other displays

ICS
01.080.20;53.020.99
CCS
P96
发布
2009-07
实施

This British Standard specifies requirements for timber scaffold boards with a width of 225 mm and a thickness of either 38 mm or 63 mm. It covers board sizing, board construction, and timber quality and grading, for which it specifies: a) two grades for 38 mm thick scaffold boards, as follows: 1) 1.2 m support centre – a grade that is suitable for support at centres up to 1.2 m, which may be selected by visual or machine strength grading; 2) 1.5 m support centre – a grade that is suitable for support at centres up to 1.5 m, which may only be selected by machine strength grading. b) a single grade for 63 mm thick scaffold boards that is suitable for support at centres up to 2.5 m, which may be selected by visual or machine strength grading. This British Standard does not cover laminated or finger-jointed scaffold boards.

Specification for timber scaffold boards

ICS
91.220
CCS
P96
发布
2009-06-30
实施
2009-06-30



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号