P98 水利工程施工机械设备 标准查询与下载

SL/T 317-2023 泵站设备安装及验收规范

Pumping station equipment installation and acceptance specifications

DB45/T 2119-2020 钢套箱及钢吊箱围堰设计与施工技术规范

Technical specification for design and construction of steel box and steel hanging box cofferdam

DL/T 5181-2017 水电水利工程锚喷支护施工规范

Specifications for anchoring and shotcreting support in hydropower and water conservancy projects

DB44/T 2041-2017 渡槽安全鉴定规程

本标准规定了广东省已建渡槽安全鉴定的程序、内容和技术要求。 本标准适用于广东省已建1级～3级渡槽的安全鉴定，4级、5级渡槽的安全鉴定可参照执行。

Aqueduct Safety Appraisal Regulations

EN 280:2013+A1:2015 移动式提升工作平台.设计计算.稳定性标准.建造.安全性.检查和测试

This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis. NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs. This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards. It does not cover the hazards arising from: a) use in potentially explosive atmospheres; b) electromagnetic incompatibility; c) work from the platform on external live electric systems; d) use of compressed gases for load bearing components; e) getting on and off the work platform at changing levels; f) specific applications (e. g. railway, ships) covered by National or local regulations. This European Standard does not apply to: a) machinery serving fixed landings (see e. g. EN 81-1 and EN 81-2, EN 12159); b) fire-fighting and fire rescue appliances (see e. g. EN 1777); c) unguided work cages suspended from lifting appliances (see e. g. EN 1808); d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528); e) tail lifts (see EN 1756-1 and EN 1756-2); f) mast climbing work platforms (see EN 1495); g) fairground equipment; h) lifting tables (see EN 1570-1); i) aircraft ground support equipment (see e. g. EN 1915-1 and EN 1915-2); j) elevating operator positions on industrial trucks (see EN 1726-2). Classification: MEWPs are divided into two main groups: a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines. b) Group B: All other MEWPs. Relating to travelling, MEWPs are divided into three types: 1) Type 1: Travelling is only allowed with the MEWP in its transport configuration; 2) Type 2: Travelling with raised work platform is controlled from a point of control at the chassis; 3) Type 3: Travelling with raised work platform is controlled from a point of control at the work platform. NOTE Type 2 and type 3 can be combined.

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

EN 12050-4:2015 建筑物和施工场地的污水提升装置.第4部分:无粪便废水和含粪便废水的非回流阀

This European Standard applies to non-return valves used for faecal-free wastewater and wastewater containing faecal matter lifting plants. This Standard specifies general requirements, basic construction and testing principles together with information on materials and the relevant assessment and verification of constancy of performance.

Wastewater lifting plants for buildings and sites - Part 4: Nonreturn valves for faecal-free wastewater and wastewater containing faecal matter

EN 12050-3:2015 建筑物和施工场地的污水提升装置.第3部分:有限公司的起重设备

This European Standard applies to lifting plants for limited applications for domestic non-commercial wastewater containing or not containing faecal matter and located below flood level. NOTE Limited application means that the number of users is small and the plant is located in the same room as the sanitary appliance(s) served by it1) which are installed in accordance with EN 12056-1 and the layout and calculation are in accordance with EN 12056-4. This European Standard applies to lifting plants for limited applications designed for wastewater containing faecal matter, where there is another WC available above flood level, and the plants serve no more than a single WC to which it is directly connected (at a distance of max. 0,5 m) and one hand washbasin, one shower and one bidet provided no other sanitary appliance is directly or indirectly connected. This European Standard also applies to lifting plants for limited applications designed for faecal free wastewater, where a maximum of one hand washbasin or kitchen sink plus one further appliance such as a bathtub or a washing machine or a shower or a dish washer or an urinal are connected. No other sanitary appliance shall be directly or indirectly connected. This European Standard contains general requirements, basic construction and testing principles, together with information on materials. Construction and testing requirements for non-return valves used in wastewater lifting plants for limited applications are given in EN 12050-4. This European Standard does not apply for lifting plants for limited applications for wastewater containing faecal matter where WC flushing is carried out by pressure flush valve.

Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications

EN 12050-2:2015 建筑废水提升设备.建造原理和试验.第2部分:无渣废水的提升设备

This European Standard applies to lifting plants for faecal-free wastewater for drainage of locations below flood level in buildings and sites to prevent any backflow of wastewater into the building. These lifting plants may be prefabricated or delivered as prefabricated kits and assembled on site. This standard specifies general requirements, basic construction and testing principles, together with information on materials and assessment and verification of constancy of performance. Construction and testing requirements for non-return valves used in wastewater lifting plants are given in EN 12050-4. This European Standard does not apply for pumping installations for drain and sewer systems outside buildings for pumping of municipal wastewater according to EN 752:2008, Annex F. This European Standard applies also to lifting plants for faecal-free wastewater which are not prefabricated but composed of individual components purchased from different suppliers and put together on site.

Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater

EN 12050-1:2015 建筑物和施工场地废水提升装置.第1部分:含粪便废水提升装置

This European Standard applies to lifting plants for wastewater containing faecal matter (referred to as "faecal lifting plants" in this standard) for drainage of locations below flood level in buildings and sites to prevent any backflow of wastewater into the building. These lifting plants may be prefabricated or delivered as prefabricated kits and assembled on site. This standard specifies general requirements, basic construction and testing principles, together with information on materials and assessment and verification of constancy of performance. Construction and testing requirements for non-return valves used in wastewater lifting plants are given in EN 12050-4. This European Standard does not apply for pumping installations for drain and sewer systems outside buildings for pumping of municipal wastewater according to EN 752:2008, Annex F. NOTE Lifting plants for wastewater containing faecal matter can also be used for wastewater that does not contain faecal matter and for surface water. This European Standard applies also to lifting plants for wastewater containing faecal matter which are not prefabricated but composed of individual components purchased from different suppliers and put together on site.

Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter

SL 317-2015 泵站设备安装及验收规范

本标准适用于新建、扩建或改造的灌溉、排水、调(引)水及工业、城镇供排水的大中型泵站及安装有大中型主机组的小型泵站的设备安装及验收。

Specification of equipment installation and acceptance for pumping stations

SL/T 317-2105 泵站设备安装及验收规范

Pumping station equipment installation and acceptance specifications

SL 656-2014 泵站拍门技术导则

本导则适用于泵站水泵出水流(管)道出口断流用拍门的选择、设计、制造、安装、试验及验收。

Technical guides for the flap valve of pumping stations

SL/T 656-2014 泵站拍门技术导则

Technical Guidelines for Pumping Station Door Slams

SL 673-2014 水电站桥式起重机

本标准规定了水电站桥式起重机(以下简称起重机)的型式分类与基本参数，技术要求，试验方法，检验规则，标志、包装、运输及储存。本标准适用于额定起重量范围为20t~500t的水电站设备安装、检修用的单、双小车桥式起重机，其吊具为吊钩、吊叉或平衡吊梁或其中两者同时使用。对于额定起重量大于500t的起重机或其他桥式起重机的相同部分可参照执行。

Bridge crane for hydropower stations

SL 692-2014 小型水电站监控保护设备应用导则

本标准规定了小型水电站监控保护设备应用的一般原则、基本功能、配置原则、技术指标、接口、运行环境，及相关信息交互等要求。本标准适用于总装机容量50MW及以下，单台机组容量0.1MW及以上新建和改造水电站的设计、施工、验收和运行。

Application guidelines on control and protection equipment of small hydropower stations

SL/T 692-2014 小型水电站监控保护设备应用导则

Application Guidelines for Monitoring and Protection Equipment of Small Hydropower Stations

SL/T 673-2014 水电站桥式起重机

Hydropower station bridge crane

DL/T 5701-2014 水电水利工程施工机械安全操作规程 反井钻机

本标准适用于水电水利工程竖井和斜井工程使用的反井钻机。

Safety operation code for construction equipment of hydropower and water conservancy engineering raise-boring machine

DL/T 5702-2014 水电水利工程沉井施工技术规程

本规程适用于水电水利工程沉井施工。

Technology code for construction of open caisson of hydropower and water conservancy engineering

DL/T 5711-2014 水电水利工程施工机械安全操作规程 带式输送机

本标准适用于在水电水利工程中使用的带式输送机。

Safety operation code for construction equipment of hydroelectric and water conservancy engineering belt conveyer