Q12 水泥混合材与外加剂 标准查询与下载

JC/T 2380-2016 抹灰砂浆添加剂

Plastering mortar additives

DB53/T 739-2016 电厂煤粉炉粉煤灰（F类）

Power plant pulverized coal furnace fly ash (F class)

BS 7979:2016 与波特兰水泥一起使用的石灰石粉规范

Specification for limestone fines for use with Portland cement

GOST R 56836-2016 合格评定. 水泥认证规则

Conformity assessment. Rules for cements certification

JG/T 486-2015 混凝土用复合掺合料

本标准规定了混凝土用复合矿物掺合料的术语和定义、组分与材料、分类与标记、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于混凝土用复合矿物掺合料的生产和检验。

Compound mineral admixtures for concrete

JIS A 1404:2015 混凝土结构用水泥防水剂的试验方法

Method of test for waterproof agent of cement for concrete construction

JIS A 6203:2015 水泥调节剂用聚合物分散剂和可再分散的聚合物粉末

Polymer dispersions and redispersible polymer powders for cement modifiers

DB35/T 1467-2014 用于水泥和混凝土中的铅锌铁尾矿微粉

本标准规定了用于水泥和混凝土中的铅锌铁尾矿微粉的术语和定义、要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于水泥生产中作为混合材料及拌制混凝土和砂浆时作为掺合料的铅锌铁尾矿微粉。

Lead-zinc-iron tailings fine powder used in cement and concrete

JIS A 1404 AMD 1:2013 混凝土结构用水泥防水剂的试验方法(修改件1)

Method of test for waterproof agent of cement for concrete construction (Amendment 1)

ASTM C882/C882M-13a 斜切法测定混凝土用环氧树脂粘结剂的粘结强度的标准试验方法

5.1 The strength developed by a bonding system that joins two regions of concrete is its most important property. 1.1 This test method covers the determination of the bond strength of epoxy-resin-base bonding systems for use with portland-cement concrete. This test method covers bonding hardened concrete to hardened or freshly-mixed concrete. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 8. (Warning —Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to exposed skin and tissue upon prolonged exposure.2)

Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

ASTM C882/C882M-13 斜切法测定混凝土用环氧树脂粘结剂的粘结强度的标准试验方法

5.1 The strength developed by a bonding system that joins two regions of concrete is its most important property. 1.1 This test method covers the determination of the bond strength of epoxy-resin-base bonding systems for use with portland-cement concrete. This test method covers bonding hardened concrete to hardened or freshly-mixed concrete. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 8. (Warning —Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to exposed skin and tissue upon prolonged exposure.2)

Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

JC/T 507-2012 建筑装饰用水磨石

本标准规定了建筑装饰用水磨石（简称水磨石）的术语和定义、分类、规格和标记、原材料、技术要求、试验方法、检验规则以及标志、包装、运输、贮存、防护和保养等。 本标准适用于预制或现浇水磨石产品。

Terrazzo for building decoration

NF P18-341-3*NF EN 934-3+A1:2012 混凝土、灰浆和灌浆用外加剂.第3部分:圬工灰浆混合料 .定义、要求、合格和标志及标签

Admixtures for concrete, mortar and grout - Part 3 : admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling.

JG/T 377-2012 混凝土防冻泵送剂

本标准规定了混凝土防冻泵送剂的术语和定义、分类和标记、要求、试验方法、检验规则、产品说明书、包装、贮存和运输、退货。 本标准适用于规定温度为-5℃、-10℃、-15℃的混凝土防冻泵送剂。

Anti-freezing and pumping admixtures for concrete

ASTM C226-12 制造加气水凝水泥用加气剂的标准规格

1.1 This specification covers the requirements and methods for establishing the suitability of a material for use as an air-entraining addition to be interground with the clinker in the manufacture of air-entraining hydraulic cement conforming to Specifications C150, C595, and C1157. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning8212;Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure. )

Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

JIS A 6204:2011 混凝土用化学添加剂

This Japanese Industrial Standard specifies air-entraining admixture, high-range water-reducing admixture, accelerator, water-reducing admixture, air-entraining and water-reducing admixture, air-entraining and high-range water-reducing admixture and superplasticizer used for the chemical admixtures for concrete (hereafter referred to as “chemical admixtures”). No International Standard corresponding to this Standard has been established at this point.

Chemical admixtures for concrete

JC/T 2093-2011 后张法预应力混凝土孔道灌浆外加剂

本标准规定了后张法预应力混凝土孔道灌浆外加剂的术语和定义、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于后张法预应力混凝土孔道灌浆材料用外加剂。

Grouts admixture for post-tensioned pre-stressed concrete ducts

YB/T 4229-2010 用于水泥和混凝土中的硅锰渣粉

Silico-manganese slag powder used in cement and concrete

YB/T 4230-2010 用于水泥和混凝土中的锂渣粉

Lithium slag powder for cement and concrete

ASTM C1438-11 水凝水泥混凝土和砂浆的胶乳和粉状聚合物调节剂标准规范

1.1 This specification covers performance criteria for latexes and redispersible powders when used as modifiers in hydraulic cement concretes and mortars to improve adhesion and reduce permeability (see Note 1). Note 18212;For further information concerning theory, benefits, limitations, and applications of polymer-modified hydraulic cementitious mixtures, refer to ACI 548.3R-09. 1.2 The performance criteria are based on certain property changes that are achieved by use of the polymer modifier when compared to reference concrete or mortar (Test Methods C1439). 1.3 Prepackaged, proprietary mortar products are not included in this specification. Also, this specification covers only those materials contained in the reference or test mixtures listed in Test Methods C1439. 1.4 The values stated in SI units are to be regarded as standard. 1.5 The following precautionary statement pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar