Q21 石材制品 标准查询与下载

ASTM C1670/C1670M-17 粘附人造石贴面砌块的标准规格

1.1 This specification covers the minimum product requirements for adhered manufactured stone masonry veneer units applied as an adhered veneer to exterior and interior walls and structures suitable to receive units. 1.2 The property requirements of this specification apply at the time of delivery. This standard does not address the physical evaluation of installed units removed from service. 1.3 The units described by this specification are manufactured from a mixture of cement, normal or lightweight aggregates (or a combination of both), water, admixtures, other cementitious materials and other components which are wet-cast into shapes simulating the appearance of natural stone and other textures. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use of units. Note 1: When particular features are desired such as surface textures or color these features should be specified separately. Suppliers should be consulted as to the availability of units having the desired features. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

ASTM C1364-17 建筑用铸石的标准规格

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specification include both wet cast and vibratory dry tamp products. Production methods of cast stone can vary among manufacturers; many production methods are acceptable provided the delivered cast stone meets the requirements of this specification. 1.3 Surface textures, finish, color, special applications, or other features shall be specified by the purchaser. Slump, manufacturing method, and apparatus shall be selected by the manufacturer and not specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Architectural Cast Stone

JC/T 2385-2016 石材复合板工艺技术规范

Stone composite panel process technical specifications

JC/T 2386-2016 天然石材墙地砖

Natural stone wall and floor tiles

BS EN 14617-2:2016 结块的石头 测试方法 弯曲强度（弯曲）的测定

Agglomerated stone. Test methods. Determination of flexural strength (bending)

ASTM C1364-16 建筑用铸石的标准规格

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specification include both wet cast and vibratory dry tamp products. Production methods of cast stone can vary among manufacturers; many production methods are acceptable provided the delivered cast stone meets the requirements of this specification. 1.3 Surface textures, finish, color, special applications, or other features shall be specified by the purchaser. Slump, manufacturing method, and apparatus shall be selected by the manufacturer and not specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Architectural Cast Stone

ASTM C170/C170M-16 规格石料抗压强度的标准试验方法

4.1 This test method is useful in indicating the differences in compressive strength between the various dimension stones. This test method also provides one element in comparing stones of the same type. 1.1 This test method covers the sampling, preparation of specimens, and determination of the compressive strength of dimension stone. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Compressive Strength of Dimension Stone

ASTM C1364-16e1 建筑铸石的标准规范

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specification include both wet cast and vibratory dry tamp products. Production methods of cast stone can vary among manufacturers; many production methods are acceptable provided the delivered cast stone meets the requirements of this specification. 1.3 Surface textures, finish, color, special applications, or other features shall be specified by the purchaser. Slump, manufacturing method, and apparatus shall be selected by the manufacturer and not specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Architectural Cast Stone

DIN EN 771-5:2015 砌块产品规范.第5部分:人造石料砌块;德文版本EN 771-5-2011+A1-2015

Specification for masonry units - Part 5: Manufactured stone masonry units; German version EN 771-5:2011+A1:2015

DIN EN 771-6:2015 砌块规范.第6部分:天然石砌块;德文版本EN 771-6-2011+A1-2015

Specification for masonry units - Part 6: Natural stone masonry units; German version EN 771-6:2011+A1:2015

NF P12-121-6/IN1*NF EN 771-6/IN1:2015 砌筑块材规范.第6部分:天然石料砌块

Specification for masonry units - Part 6 : natural stone masonry units

JC/T 2325-2015 异型人造石制品

本标准规定了异型人造石制品的术语和定义，分类与标记，规则形体基本拼接块数，技术要求，试验方法，检验规则以及标志、包装、运输和贮存。本标准适用于以异型人造石石英石(下称异型石英石，包括无机石英石)、异型人造石岗石(下称异型岗石，包括无机岗石)和异型人造石实体面材(下称异型实体面材)加工而成的建筑装饰用规则形体和非规则形体的异型人造石制品。

Special type artificial stone products

DB44/T 1100.5-2015 人造石试验方法 第5部分 盐雾老化试验

本标准规定了人造石板材在中性盐雾中加速老化试验所用的试验溶液、仪器设备、试样、试验步骤、结果计算及试验报告。 本标准适用于以不饱和聚酯树脂(或高分子聚合物)或水硬性无机胶凝剂为主要粘合剂，经加工合成的具有一定规格尺寸和形状的人造石饰面板材(以下简称板材)。

Artificial stone test methods part 5 salt spray aging test

DB44/T 1100.6-2015 人造石试验方法 第6部分 氙灯老化测试

本标准规定了人造石在实验室氙灯光源的曝露下发生老化的试验方法和结果计算。 本标准适用于以不饱和聚酯树脂(或高分子聚合物)或水硬性无机胶凝剂为主要粘合剂，经加工合成的具有一定规格尺寸和形状的人造石饰面板材(以下简称板材)。

Artificial stone test methods part 6 xenon arc aging test

DB44/T 1601-2015 无机型人造石板材

本标准规定了无机型人造石板材的术语与定义、分类与等级、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以无机胶凝材料为主要粘合剂加工而成的人造石板材产品。

Inorganic type artificial stone plate

DIN EN 12058:2015 天然石材制品.地板和楼梯用板材.要求;德文版本EN 12058-2015

Natural stone products - Slabs for floors and stairs - Requirements; German version EN 12058:2015

DIN EN 1469:2015 天然石料制品.镶面用石板.要求;德文版本EN 1469-2015

Natural stone products - Slabs for cladding - Requirements; German version EN 1469:2015

DIN EN 12057:2015 天然石材制品.预制面砖.要求;德文版本EN 12057-2015

Natural stone products - Modular tiles - Requirements; German version EN 12057:2015

BS EN 12057:2015 天然石材制品 模块化瓷砖 要求

Natural stone products. Modular tiles. Requirements

BS EN 1469:2015 天然石材制品 用于覆层的板 要求

Natural stone products. Slabs for cladding. Requirements