Q21 石材制品 标准查询与下载
共找到 438 条与 石材制品 相关的标准，共 30 页
This European Standard specifies the requirements for masonry bed joint reinforcement for structural use (see 5.2.1) and for non-structural use (see 5.2.2). Where products are intended for use in cavity wall construction, this European Standard covers only the performance of the meshwork as reinforcement in bed joints and not its performance as wall ties across the cavity. This European Standard is not applicable to: a) products in the form of individual bars or rods; b) products formed from materials other than specified grades of austenitic stainless steel, austenitic ferritic stainless steel, zinc pre-coated steel sheet or zinc coated steel wire with or without organic coating. NOTE Annex ZA refers only to welded wire meshwork intended for structural use referred to in 5.2.1 as there are no known regulated requirements for products of this family for non-structural use.
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
- ICS
- 91.080.30
- CCS
- Q21
- 发布
- 2013-05-01
- 实施
Natural stone test methods - Determination of sensitivity to accidental staining; German version EN 16301:2013
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-05
- 实施
Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles; German version EN 16306:2013
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-05
- 实施
Agglomerated stone. Test methods. Determination of electrical resistivity
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-04-30
- 实施
- 2013-04-30
Natural stone test methods. Determination of resistance to ageing by thermal shock
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-04-30
- 实施
- 2013-04-30
Agglomerated stone. Test methods. Determination of apparent density and water absorption
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-04-30
- 实施
- 2013-04-30
Natural stone test methods - Determination of resistance to ageing by thermal shock
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-04-27
- 实施
- 2013-04-27
本标准规定了人造石(包括人造石实体面材、人造石石英石和人造石岗石等)的术语和定义、产品分类、规格尺寸、等级和标记、材料、要求、试验方法、检验规则以及包装、标志、运输和贮存等。本标准适用于台面、墙、地面、吊顶材料、装饰性面材和板线等使用人造石实体面材、人造石石英石和人造石岗石，其他种类和用途的人造石及其制成品(如洗面盆和浴缸等)也可参照釆用。
Artificial stone
- ICS
- 91.100.20
- CCS
- Q21
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了石雕石刻品(以下简称产品)的术语和定义、分类、命名和标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等、本标准适用于天然石材加工的产品、
Natural stone sculpture
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-04-05
- 实施
- 2013-09-01
This European Standard covers the determination of DC insulation resistance, surface resistance and resistivity, and the corresponding electrical conductance and conductivity of specimens of agglomerated stone products conforming to the definition reported in EN 14618. These products are usually made by stone aggregates bound via either resin and filler or cement and water (paste components), or a mixture of polymer/cement and related addition (such as reinforcing fibres, electrically insulating/conducting fillers, etc.). Resistivity/conductivity may also be used as an indirect measure of some properties of agglomerated stone products (see Annex A - informative). Volume resistance and resistivity test method and the corresponding electrical conductance and conductivity of specimens of agglomerated stone products are also included (see Annex C - informative).
Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-04-01
- 实施
- 2013-04-01
This European Standard specifies a method for determining the apparent density and water absorption of agglomerated stone products.
Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-04-01
- 实施
- 2013-04-01
Natural stone test methods. Determination of sensitivity to accidental staining
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-03-31
- 实施
- 2013-03-31
This European Standard specifies a method to assess possible changes of natural stones under the effect of sudden changes in temperature (thermal shock).
Natural stone test methods - Determination of resistance to ageing by thermal shock
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-03-01
- 实施
- 2013-03-01
Tests for chemical properties of aggregates - Part 1: Chemical analysis; German version EN 1744-1:2009+A1:2012
- ICS
- 91.100.15
- CCS
- Q21
- 发布
- 2013-03
- 实施
Kerbs of natural stone for external paving - Requirements and test methods; German version EN 1343:2012
- ICS
- 93.080.20
- CCS
- Q21
- 发布
- 2013-03
- 实施
Setts of natural stone for external paving - Requirements and test methods; German version EN 1342:2012
- ICS
- 93.080.20
- CCS
- Q21
- 发布
- 2013-03
- 实施
Slabs of natural stone for external paving - Requirements and test methods; German version EN 1341:2012
- ICS
- 93.080.20
- CCS
- Q21
- 发布
- 2013-03
- 实施
Setts of natural stone for external paving. Requirements and test methods
- ICS
- 93.080.20
- CCS
- Q21
- 发布
- 2013-02-28
- 实施
- 2013-02-28
Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
- ICS
- 73.020;91.100.15
- CCS
- Q21
- 发布
- 2013-02-28
- 实施
- 2013-02-28
Slabs of natural stone for external paving. Requirements and test methods
- ICS
- 93.080.20
- CCS
- Q21
- 发布
- 2013-02-28
- 实施
- 2013-02-28
