Q33 建筑玻璃 标准查询与下载

JC/T 1006-2018 釉面钢化及釉面半钢化玻璃

本标准规定了釉面钢化及釉面半钢化玻璃的术语和定义、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以平板玻璃为基片的釉面钢化及釉面半钢化玻璃。

Tempered and heat-strengthened enamelled glass

JC/T 1008-2018 玻璃用防发霉材料

本标准规定了玻璃用防发霉材料的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于防止玻璃原片及玻璃加工产品产生发霉的纸质、粉类、液态材料。

Prevent weathering of glass material used on glass

JC/T 2451-2018 硼硅酸盐平板玻璃

本标准规定了硼硅酸盐平板玻璃的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和储存。 本标准适用于建筑、家电和照明用无色硼硅酸盐平板玻璃。其他用途无色硼硅酸盐平板玻璃可参照使用。

Borosilicate flat glass

JC/T 2453-2018 中空玻璃间隔条 第3部分:暖边间隔条

本部分规定了中空玻璃暖边间隔条的术语和定义、分类和规格、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本部分适用于中空玻璃暖边间隔条。

Spacer for insulating glass unit.Part 3:Warm edge spacer

JC/T 2454-2018 超薄钢化玻璃

本标准规定了超薄钢化玻璃的分类、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于厚度小于3 mm(d＜3 mm)经物理钢化工艺制成的平面钢化玻璃。

Ultra-thin tempered glass

JC/T 2452-2018 中空玻璃间隔条 第2部分:不锈钢间隔条

本部分规定了中空玻璃不锈钢间隔条的术语和定义、材料和规格、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本部分适用于中空玻璃用不锈钢间隔条。

Spacer for insulating glass units.Part 2:Stainless steel spacer

BS 6262-7:2017 建筑物用门窗玻璃.信息提供的实施规则

Glazing for buildings. Code of practice for the provision of information

DIN EN 16477-1:2017 建筑用玻璃.内部使用彩色玻璃.第1部分:要求;德文版本EN 16477-1-2016

Glass in building - Painted glass for internal use - Part 1: Requirements; German version EN 16477-1:2016

DIN 1249-11:2017 建筑用玻璃.第11部分:玻璃边缘.边缘类别和精加工术语、定义与特性

Glass in building - Part 11: Glass edges - Terms and definitions, characteristics of edge types and finishes

JIS R 3223:2017 钢化防火玻璃

Tempered fire resistance glass

ISO 16293-3:2017 建筑用玻璃. 基本钠钙硅酸盐玻璃制品. 第3部分: 抛光夹丝玻璃

Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass

ISO 20657:2017 建筑玻璃.热浸钢化钠钙硅酸盐安全玻璃

This document specifies product definitions, product characteris tics, i.e. tolerances, flatness, edgework, etc., fracture characteris tics, including fragmentation, and the physical and mechanical characteristics of flat heat soaked tempered soda lime silicate safety glass for use in buildings . This documentdoes notcover curved (bent) glass accordingISO 11485.

Glass in building - Heat soaked tempered soda lime silicate safety glass

ISO 12540:2017 建筑用玻璃. 钠钙硅酸盐钢化安全玻璃

Glass in building - Tempered soda lime silicate safety glass

ISO 16293-2:2017 建筑用玻璃. 基本钠钙硅酸盐玻璃制品. 第2部分: 浮法玻璃

Glass in building - Basic soda lime silicate glass products - Part 2: Float glass

BS EN 15681-2:2017 建筑用玻璃. 基本铝硅酸盐玻璃制品. 产品标准

Glass in Building. Basic alumino silicate glass products. Product standard

DB32/T 3197-2017 工业气体空分单位产品综合电耗限额及计算方法

本标准规定了工业气体空分单位产品综合电耗限额的术语和定义、单位产品综合电耗限额、统计范围和计算原则、计算方法及主要节能管理措施。 本标准适用于深冷法生产空分产品（氧、氮、氩）电耗的计算、考核与评价。 本标准不适用于以蒸汽驱动的空分装置。

Comprehensive power consumption quota and calculation method of industrial gas air separation unit products

ASTM E3120-17 评价环境控制的动态玻璃加速老化性能的标准规格

1.1 This specification is applicable to environmentally controlled dynamic glazings (ECDG) whose visible light transmittance or near infrared light transmittance properties, or both, can be changed reversibly by exposure to changing environmental conditions such as temperature and sunlight intensity. This includes thermochromic and thermotropic glazing, but currently excludes photochromic glazings as neither Test Method E3119 nor this specification provide a procedure to access multiple states of photochromic glazing specimens. 1.2 This specification does not apply to other types of dynamic glazing which require an electrical stimulus to change light transmittance, such as electrochromic glazings. 1.3 This specification covers environmentally controlled dynamic glazing (ECDG) in monolithic glass, monolithic laminated glass, or pre-assembled, permanently sealed insulating glass units with one or more cavities in which at least one lite is an ECDG (which may be in the form of a laminated lite or a single pane with coatings or film applied). This specification is also applicable to ECDG devices in pre-assembled insulating glass units with capillary tubes intentionally left open. As applicable, this specification also requires conformance to Specification E2190. 1.4 This specification is applicable only to monolithic glass, monolithic laminated glass, and sealed insulating glass units that are constructed with glass and fabricated for vision glass areas for use in buildings, such as sliding doors, windows, skylights, and exterior wall systems. 1.5 Qualification under this specification is intended to provide a basis for evaluating the aging performance of environmentally controlled dynamic glazing in monolithic glass, monolithic laminated glass, and sealed insulating glass units. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings

ASTM E3119-17 环境控制的动态玻璃加速老化的标准试验方法

4.1 ECDG perform a number of important functions in a building envelope including: reducing the solar energy heat gain; providing a variable visual connection with the outside world; enhancing human comfort (heat gain), security, illumination, and glare control; providing for architectural expression, and (possibly) improving acoustical performance. It is therefore important to understand the relative serviceability of these glazings. 4.2 This test method is intended to provide a means for assessing the relative serviceability of ECDGs, as described in Section 1. 4.3 The test method is intended to simulate in-service use and accelerate aging of the environmentally controlled dynamic glazings. 4.4 Results from these tests cannot be used to predict the performance over time of in-service units unless actual corresponding in-service tests have been conducted and appropriate analyses have been conducted to show how performance can be predicted from the accelerated aging tests. 4.5 The procedure in this test method includes environmental test parameters that are typically used in weatherability tests by standards organizations and are realistic for the intended use of large-area ECDG units. 1.1 This test method covers the accelerated aging and monitoring of the time-dependent performance of environmentally controlled dynamic glazings such as thermochromic (TC) thermotropic, photochromic glazings. and combinations thereof. 1.2 The test method is applicable only for environmentally controlled dynamic glazings. These glazings may be either monolithic glass, monolithic laminated glass, or sealed insulating glass units fabricated for use in buildings, such as exterior doors, windows, skylights, and wall systems. 1.3 During use, the environmentally controlled dynamic glazings tested according to this method are exposed to environmental conditions, including solar radiation and are employed to control the amount of transmitted radiation by absorption and reflection and thus, limit the amount of solar radiation that is transmitted into a building. 1.4 The test method is not applicable to electronically controlled chromogenic devices, such as electrochromic devices. 1.5 The test method is not applicable to environmentally controlled dynamic glazings that are constructed from superstrate or substrate materials other than glass. 1.6 The test method referenced herein is a laboratory test conducted under specified conditions. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of t......

Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing

BS EN 16477-1:2016 建筑用玻璃. 内部使用彩色玻璃. 要求

Glass in building. Painted glass for internal use. Requirements

ISO 16293-5:2016 建筑用玻璃. 基本钠钙硅酸盐玻璃制品. 第5部分: 压花玻璃

Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass