Q33 建筑玻璃 标准查询与下载

ISO 1288-5:2016 建筑用玻璃. 玻璃抗弯强度的测定. 第5部分: 试验表面积较小的扁平样品的同轴双环试验

Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas

DB32/ 2863-2016 宾馆单位综合能耗限额及计算方法

本标准规定了宾馆经营过程中单位综合能源消耗（以下称能耗）限额的术语和定义、单位综合能耗限额、统计范围、计算方法及主要节能管理措施。 本标准适用于正在运行中的既有的三星级至五星级的宾馆能源消耗量的计算与评价。 本标准所指统计期为一年。

Comprehensive energy consumption quota and calculation method for hotel units

DB32/T 2867-2016 固定资产投资项目节能评估导则

本标准规定了固定资产投资项目节能评估的术语和定义、节能评估依据、节能评估文件内容、节能评估技术要点、能效指标计算方法、节能评估文件的编制要求。 本标准适用于新建、改建和扩建固定资产投资项目节能评估相关技术要求。

Guidelines for Energy Conservation Evaluation of Fixed Assets Investment Projects

EN 15681-1:2016 建筑玻璃.基本硅酸铝玻璃产品.第1部分:定义和一般的物理和机械性能

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults). This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use. This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties

ASTM C1036-16 平面玻璃的标准规格

1.1 This specification covers the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets. 1.2 This specification is applicable for laboratory and field evaluation only to the extent that such evaluation can be carried out in accordance with the test method(s) prescribed herein. 1.3 This specification covers the quality requirements of flat, transparent, clear, and tinted glass. This glass is intended to be used primarily for architectural glazing products including: coated glass, insulating glass units, laminated glass, mirrors, spandrel glass, or similar uses. Note 1: Reflective distortion is not addressed in this specification. 1.4 This specification covers the quality requirements of patterned or wired glasses intended to be used primarily for decorative and general glazing applications. 1.5 The values given in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Flat Glass

ISO 29584:2015 建筑物玻璃.安全玻璃摆锤撞击测试和分类

The purpose of this International Standard is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact. This International Standard examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves the reproducibility of test results and gives a common basis of classification. The aim is for the performance of glass products manufactured and tested in various countries to be better understood and more consistent. Two types of soft body impactors are defined. The traditional shot bag impactor is detailed both in terms of manufacture and maintenance in an attempt to overcome problems associated with such impactors becoming misshapen. The twin tyre impactor is also detailed. The test equipment, excluding the impactor, is also described. A method of calibrating the test frame is given. The benefit of calibrating the test equipment is the increased reproducibility of the test results. Classification of glass products is also detailed. The classification system allows information on the following to be given: a) the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass or toughened glass; c) the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass. b) the manner in which the glass would break, i.e. as toughened glass, laminated glass, annealed glass, irrespective of whether or not the glass was broken during the test; This International Standard does not specify the intended use of the products, but provides a method of classification in terms of the performance of the materials being tested. The impact energy used for the various levels of classification are designed to provide the intended user or the legislator with the information to assist in defining the level of safety and protection required relative to the intended location at which the selected safety glass is to be used.

Glass in building - Pendulum impact testing and classification of safety glass

DIN EN 12150-1:2015 建筑物用玻璃.热钢化硅酸盐安全玻璃.第1部分:定义和说明;德文版本EN 12150-1-2015

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 12150-1:2015

NF P78-470:2015 建筑用玻璃. 无日光防护的隔热玻璃组件使用部件温度和密封作用力的计算

Glass in building - Calculation of the temperatures of components and the forces in seals for insulating glass units without solar protection

NF P78-221-1:2015 建筑玻璃.热钢化钠钙安全玻璃.第1部分:定义和描述

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1 : definition and description

KS L 2521-2015 路面标志涂料用玻璃球

Glass beads for traffic paint

KS L 2100-2015 玻璃灯泡中汞的定量方法

Determination of mercury in glass bulb

KS L 2019-2015 玻璃六价铬的定量方法

Glass — Determination of hexavalent chromium

KS L 2402-2015 碳酸饮料玻璃瓶防碎裂性能试验方法

Testing methods for the fragment retention of carbonated beverage bottles

KS L 2018-2015 玻璃的铅和镉的定量方法

Glass — Determination of lead and cadmium — Inductively coupled plasma emission spectrometric method

SJ/T 11553-2015 93%氧化铝真空电子用陶瓷

本标准规定了真空电子器件专用93%氧化铝陶瓷的定义、性能要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于真空电子器件装置瓷体及装置零件等用的氧化铝质量分数为(93±0.5) %氧化铝陶瓷(93%氧化铝瓷)。其他领域使用的结构工程用93%氧化铝陶瓷可参照使用。

93% A1203 ceramics for vacuum electronic device

BS EN 12150-1:2015 建筑物用玻璃.热钢化钠钙安全玻璃.定义和说明

Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description

EN 12150-1:2015 建筑玻璃.热钢化安全玻璃.碱石灰玻璃.第1部分:定义和描述

This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings. Information on curved thermally toughened soda lime silicate safety glass is given in Annex A, but this product does not form part of this European Standard. Other requirements, not specified in this European Standard, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e. g. laminated glass or insulating glass units, or undergo an additional treatment, e. g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials. Surface finished glasses (e. g. sandblasted, acid etched) after toughening are not covered by this European Standard.

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description

GOST 33561-2015 玻璃和玻璃制品. 应用指南

Glass and glass products. Application guidelines

GOST 6943.14-2015 纺织玻璃. 纱线. 捻度平衡指数的测定方法

Textile glass. Yarns. Method for determination of twist balance index

PNST 70-2015 多功能软镀膜玻璃. 规格

Multifunction soft coating glass. Specifications