Q45 定型隔热耐火材料 标准查询与下载

JIS R 2302:1995 镁氧砖

この規格は，マグネンアれんがについて規定する。

Magnesia brick

JIS A 1432:1995 测定隔热管热性能的试验方法(热水循环程序)

この規格は，住宅などの暖房（冷房)又は給湯配管に用いられる，エ場で被覆材を取り付けた小口径管の流水試験方法による熱的性能について規定する。備考1.ここでいう熱的性能とは，被覆材付き配管の線熱損失率，線熱通過率，被覆材表面温度などをいう。 2.この規格の中で{ }を付けて示してある単位及び数値は，従来単位によるもので参考値である。

Method of testing to determine the thermal properties of insulated heating tubes (Hot water circulation procedure)

ASTM C134-95(2005) 耐火砖和绝热耐火砖的尺寸、尺寸测量和松装密度的标准试验方法

Refractory brick are used as modular units in furnace construction and should not deviate significantly from the intended configuration with respect to size, bulk density, flat surfaces, and right angles. These test methods are particularly suited for use under field conditions and provide a means to determine whether the brick meets the requirements considered necessary to assure a satisfactory refractory construction. 1.1 These test methods cover procedures for measuring size, dimensional measurement, bulk density, warpage, and squareness of rectangular dense refractory brick and rectangular insulating firebrick. More precise determination of bulk density of refractory brick can be made by Test Methods C 20. Stack height is generally determined only for dense refractories.Note 18212;Test Methods C 830 and Test Method C 914 are also used to determine bulk density of refractory brick, by different procedures.1.2 The test methods appear in the following order: SectionsSize and Bulk Density 4 through 7 Warpage of Refractory Brick 8 through 10 Squareness of Refractory Brick 11 through 14 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

ASTM C210-95(2007)e1 绝热耐火砖二次加热变化的标准试验方法

Insulating firebrick (IFB) are classified by their bulk density and reheat change (see Classification C 155). This test method defines thermal stability by measurement of IFBrsquo;reheat change following 24 h at a test temperature. Since this test exposes the entire sample to an isothermal temperature condition, the user should be aware that most applications for IFB involve a thermal gradient which may cause the IFBrsquo;dimensions to change differentially.1.1 This test method covers the determination of the permanent linear (and volume) change of insulating firebrick upon reheating under prescribed conditions.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Reheat Change of Insulating Firebrick

YB/T 386-1994 硅质隔热耐火砖

Siliceous insulating fire brick

ASTM C861-93(2010) 标准系列耐火砖和异型砖的公制尺寸的测定的标准实施规程

This practice is provided in the interest of facilitating the transition of dimensional practice for standard refractory brick and shapes from inch-pound units to metric (SI) units. The standard dimensions are based on a 38-mm module (taken as the equivalent to 1.5 in.) and are developed with the aim of preserving a modular relationship between the dimensions of the principal rectangular refractory shapes. 1.1 This practice covers dimensions in millimetres for standard series refractory brick and shapes of all compositions. 1.2 A standard method for converting all other dimensions of shaped refractory articles from inch-pound to SI units is included. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes

ASTM C202-93(2009)e1 耐火砖导热性的标准试验方法

The thermal conductivity of refractory brick is a property required for selecting their thermal transmission characteristics. Users select refractory brick to provide specified conditions of heat loss and cold face temperature, without exceeding the temperature limitation of the brick. This test method establishes placement of thermocouples and positioning of test specimens in the calorimeter. This procedure must be used with Test Method C 201 and requires a large thermal gradient and steady state conditions. The results are based upon a mean temperature. The data from this test method are suitable for specification acceptance, estimating heat loss and surface temperature, and design of multi-layer refractory construction. The use of these data requires consideration of the actual application environment and conditions. 1.1 This test method supplements Test Method C 201 and shall be used in conjunction with that test method to determine the thermal conductivity of refractory brick with the exception of insulating firebrick (use Test Method C 182), and carbon refractories. This test method is designed for refractories having a conductivity factor of not more than 200 Btu·in./h·ft2·°F (28.8 W/m·K). 1.2 Units8212;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 Exception8212;Certain flow and weight measurements are expressed in SI units only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Conductivity of Refractory Brick

ASTM C909-93(2010) 耐火砖和异型砖模数系列的尺寸规格标准实施规程

The dimensions listed in this practice represent the dimensions of rectangular and tapered refractory shapes manufactured and used in the United States. The modular concept of dimensions permits a versatile arrangement of bonding during the construction of masonry units. 1.1 This practice covers the dimensions for rectangular and tapered brick in common usage in the United States. 1.2 The dimensions are modular based on 38 mm as the basic module as described in Practice C861.

Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes

ASTM C202-93(2013) 耐火砖导热性的标准试验方法

3.1 The thermal conductivity of refractory brick is a property required for selecting their thermal transmission characteristics. Users select refractory brick to provide specified conditions of heat loss and cold face temperature, without exceeding the temperature limitation of the brick. This test method establishes placement of thermocouples and positioning of test specimens in the calorimeter. 3.2 This procedure must be used with Test Method C201 and requires a large thermal gradient and steady state conditions. The results are based upon a mean temperature. 3.3 The data from this test method are suitable for specification acceptance, estimating heat loss and surface temperature, and design of multi-layer refractory construction. 3.4 The use of these data requires consideration of the actual application environment and conditions. 1.1 This test method supplements Test Method C201 and shall be used in conjunction with that test method to determine the thermal conductivity of refractory brick with the exception of insulating firebrick (use Test Method C182), and carbon refractories. This test method is designed for refractories having a conductivity factor of not more than 200 Btu·in./h·ft2·°F (28.8 W/m·K). 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 Exception—Certain flow and weight measurements are expressed in SI units only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Conductivity of Refractory Brick

ASTM C202-93(2004) 耐火砖导热性的标准试验方法

The thermal conductivity of refractory brick is a property required for selecting their thermal transmission characteristics. Users select refractory brick to provide specified conditions of heat loss and cold face temperature, without exceeding the temperature limitation of the brick. This test method establishes placement of thermocouples and positioning of test specimens in the calorimeter. This procedure must be used with Test Method C 201 and requires a large thermal gradient and steady state conditions. The results are based upon a mean temperature. The data from this test method are suitable for specification acceptance, estimating heat loss and surface temperature, and design of multi-layer refractory construction. The use of these data requires consideration of the actual application environment and conditions. 1.1 This test method supplements Test Method C 201 and shall be used in conjunction with that test method to determine the thermal conductivity of refractory brick with the exception of insulating firebrick (use Test Method C 182), and carbon refractories. This test method is designed for refractories having a conductivity factor of not more than 200 Btuin./hft2176;F (28.8 W/mK). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thermal Conductivity of Refractory Brick

JIS R 2205:1992 耐火砖的表观孔隙率、吸水率比重的检测方法

この規格は，焼成した耐火れんがの次の各項の試験方法について規定する。

Testing method for apparent porosity, water absorption specific gravity of refractory bricks

JIS R 2611:1992 隔热耐火砖

Insulating fire bricks

BS 3056-7:1992 耐火砖尺寸.第7部分:炼钢用碱性砖规范

This Part of BS 3056 specifies the sizes of basic refractory bricks used in steel making. Bricks used in the construction of electric arc furnace roofs are excluded from this Part and are given in BS 3056 : Part 4. NOTE 1. The tolerances on the sizes are not specified in this British Standard, and may be the subject of agreement between the manufacturer and purchaser. NOTE 2. The titles of the publications referred to in this standard are given on the inside back cover.

Sizes of refractory bricks - Specification for basic bricks for steel making

JIS R 2204:1991 耐火砖耐火度的测试方法

Testing method for refractoriness of refractory brick

JIS R 2652:1991 可铸轻质耐火材料的粒度测试方法

この規格は，軽量キャスタプルの粒度試験方法について規定する。

Testing method for grain size of light weight castable refractories

JIS R 2206:1991 耐火砖的抗冷压碎强度的测试方法

この規格は，耐火れんがの圧縮強さの試験方法について規定する。

Testing method for cold crushing strength of refractory bricks

JIS R 2209:1991 耐火砖负载下耐火性能的测试方法

Testing method for refractoriness under load of refractory bricks

ISO 8841:1991 致密定型耐火制品 透气性的测定

The method specified takes account of the dynamic viscosity of the gas, and therefore the results obtained may not be directly comparable with those obtained by earlier methods. Describes the principle, the apparatus, the test pieces and procedure, the expression of results, and the contents of the test report.

Dense, shaped refractory products; determination of permeability to gases

ISO 10081-1:1991 碱性耐火制品 分类 第1部分:含残留碳小于7%的制品

Basic refractory products; classification; part 1: products containing less than 7 % residual carbon

YB 4033-1991 连铸中间包用硅质绝热板

Silicon insulation board for continuous casting tundish