Q62 石膏制品 标准查询与下载

ASTM C11-01a 石膏及相关建筑材料和系统的标准术语

1.1 This standard contains terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems

ASTM C471M-01 石膏和石膏制品的化学分析标准试验方法(米制)

1.1 These test methods cover the chemical analysis of gypsum and gypsum products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster and gypsum concrete. Note 18212;Gypsum reference standard materials, prepared by Domtar, Inc are available through Brammer Standards Company, Inc.1.2 The test methods appear in the following order:SectionsAlternative Procedure for Analysis for Calcium Sulfate by Ammonium Acetate Method17-22 Alternative Procedure for Analysis for Sodium Chloride by the Coulometric Method23-29 Complete Procedure5-6Determination of Sand in Set Plaster30-36Optional Procedure for Analysis for Sodium by Flame Photometry47-54Optional Procedure for Analysis for Sodium by the Atomic Absorption Method40-46 Preparation of Sample4Wood-Fiber Content in Wood-Fiber Gypsum Plaster37-391.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.1.4 The values stated in SI units are to be regarded as the standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]

ASTM C840-01 石膏板的加工和应用标准规范

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-Ply Gypsum Board to Wood Framing Members 8II Application of Two-Ply Gypsum Board to Wood Framing Members9III Application of Gypsum Board by Adhesive Nail-On to Wood Framing Members10IV Semi-Solid Gypsum Board Partitions11V Solid Gypsum Board Partitions12VI Application of Gypsum Board with Adhesives to Interior Masonry or Concrete Walls13VII Application of Gypsum Board to Rigid Foam Insulation14VIII Application of Gypsum Board to Steel Framing and Furring15IX Arches and Bending Radii16X Application of Gypsum Board to Receive Tile by Adhesive Application17XI Exterior Application of Gypsum Wallboard and Exterior Gypsum Soffit Board18XII Floating Interior Angles19XIII Control (Expansion) Joints20XIV Foil-Backed Gypsum Board21 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.7 The following precautionary caveat pertains only to Sections 6-23. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7.1 For specific precautionary statements, see 4.1.1 , 4.1.2 and 22.5.

Standard Specification for Application and Finishing of Gypsum Board

GA 221-2000 石膏板联合起垄的修复

Joint ridging, also called beading, is a uniform, fine line deformation occurring at gypsum board joints. It is usually caused by compression of the edges or ends of the finished and decorated gypsum board resulting from the edges or ends being forced together from exposure to alternating periods of high and low temperature and humidity extremes due to thermal or hygrometric expansion.

Repair of Gypsum Board Joint Ridging

ASTM C754-00 用螺钉安装石膏墙板的钢框构件安装的标准规范

1.1 This specification covers the minimum requirements for the installation of interior nonstructural steel framing and furring members designed to receive screw-attached gypsum panel products. The steel framing and furring members covered in this specification are limited to those complying with Specification C645. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only.

Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

ASTM C954-00 将厚度为0.033至0.112英寸(0.84至2.84mm)的石膏板或金属熟石膏基板安装在钢骨上所用的钻孔钢螺钉的标准规范

1.1 This specification covers minimum requirements for steel drill screws for use in fastening gypsum panel products or metal plaster bases to steel members from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in thickness. 1.2 This specification also covers physical properties and test methods for determining performance requirements. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

ASTM C318/C318M-00(2010) 石膏预制板的标准规格

1.1 This specification covers the minimum requirements for gypsum formboard designed for use as a permanent form for poured-in-place reinforced gypsum concrete roof decks. 1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined. 1.3 The text of this standard references notes which provide explanatory material. These notes shall not be considered requirements of the standard.

Standard Specification for Gypsum Formboard

ASTM C22/C22M-00(2010) 石膏标准规格

1.1 This specification covers gypsum, calcium sulfate combined with two molecules of water in crystalline form and having the approximate chemical formula CaSO4·2H2O. 1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined. 1.3 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

Standard Specification for Gypsum

ASTM C317/C317M-00(2010) 石膏混凝土的标准规格

1.1 This specification covers mill-mixed gypsum concrete, consisting essentially of calcined gypsum and suitable aggregate, requiring the addition of water only at the job site. Gypsum concrete is intended for use in the construction of poured-in-place roof decks or slabs. Two classes, based on the compressive strength and density, are covered. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

Standard Specification for Gypsum Concrete

ASTM C473-00 石膏板制品的标准物理试验方法

1.1 These test methods cover the physical testing of gypsum board products and gypsum lath. 1.2 The test methods appear in the following order: Sections Flexural Strength (Method A) 4 to 8 Core, End, and Edge Hardness (Method A) 9 to 17 Nail Pull Resistance (Method A) 18 to 23 Flexural Strength (Method B) 25 to 32 Core, End, and Edge Hardness (Method B) 33 to 40 Nail Pull Resistance (Method B) 41 to 48 Humidified Deflection 49 to 53 End Squareness 54 to 56 Nominal Thickness 57 to 61 Recessed- or Tapered-Edge Depth 62 to 66 Width 67 to 71 Length 72 to 76 Water Resistance of Core-Treated Water-Repellent Gypsum Boards 77 to 81 Surface Water Resistance of Gypsum Boards with Water- Repellent Face Paper 82 to 86 1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C59/C59M-00(2011) 石膏铸件和模型用灰泥的标准规范

1.1 This specification covers gypsum casting plaster and gypsum molding plaster materials consisting essentially of calcined gypsum. 1.2 The values stated in either inch-pound or SI (metric) units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard.

Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

ASTM C1467/C1467M-00(2006) 模制玻璃纤维增强石膏部件安装的标准规范

1.1 This specification covers the installation of molded glass fiber reinforced gypsum (GRG) parts.1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as the standard. Within the text, SI units are shown in brackets. The values stated in each shall be used independent of the other. Values from the two systems shall not be combined.1.3 All references to finishes, dimensions and tolerances shall refer to the finished surface of the part.1.4 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

ASTM C59/C59M-00(2006) 铸模石膏和造型石膏标准规范

1.1 This specification covers gypsum casting plaster and gypsum molding plaster materials consisting essentially of calcined gypsum.1.2 The values stated in either inch-pound or SI (metric) units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined.1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard.

Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

JIS R 9200:1999 关于石膏、石灰的术语汇编

この規格は，せっこう及び石灰に関運する工業において用いられる主な用語について規定する。

Glossary of terms related to gypsum and lime

GA 253-1999 应用石膏护套

This apecification describes the mininers quirenierts for ,and the methods of baoding , storage, and application of ,

Application of Gypsum Sheathing

NF P15-201-1/A2:1999 补充件2

Supplement 2

BOCA CHAPTER 25 NBC-1999 石膏板和石膏

This table, a nomogram, determines the distribution pipe or manifold length, hole or distribution pipe spacing, number of boles, dis?ibution discharge rate and hole diameter of pressure distribution systems by the placement of a straightedge between two

Gypsum Board and Plaster

ASTM C1280-99 石膏包覆板应用的标准规范

1.1 This specification covers the minimum requirements for, and methods of application of, gypsum sheathing for use as a substrate for exterior wall cladding. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the fire-rated construction. 1.3 Where sound control is required for a gypsum sheathing assembly, the details of construction shall be in accordance with the acoustical test report of an assembly that has met the required acoustical value(s). 1.3.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the sound-rated construction. 1.4 Where resistance to racking loads or shear is required for a gypsum sheathing assembly, the details of construction shall be in accordance with the racking or shear test report of an assembly that has met the required racking or shear value(s). 1.4.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the racking or shear-tested construction. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents of inch-pound units may be approximate. 1.6 The text of this standard references footnotes which provide explanatory material. These footnotes shall not be considered as requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Application of Gypsum Sheathing

ASTM C844-99 石膏饰面粉饰基底用石膏的应用的标准规范

1.1 This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters. Note 1-Gypsum veneer base shall not be used as a base for direct adhesive application of ceramic, metal, or plastic tile in areas exposed to abnormal moisture or humidity or temperature. 1.2 Where a specific degree of fire resistance is required for gypsum base and veneer plaster systems, a special resistant base may be required. Details of constructions to achieve the required fire resistance may be obtained from official reports of fire tests conducted at recognized fire testing laboratories in accordance with Test Methods E119. 1.3 Where a specific degree of sound control is required for veneer plaster assemblies and constructions, details of construction shall be in accordance with official reports of tests conducted in recognized sound testing laboratories in accordance with the applicable sound tests, Test Method C423, Test Method E90, or Test Method E492. 1.4 Where this specification is more stringent (size or thickness of framing; spacing of fasteners) than the fire-rated construction, this specification shall govern; otherwise, the construction described in the fire test report shall govern. 1.5 Unheated spaces above gypsum veneer base ceilings shall be properly ventilated (see Appendix X3). 1.6 General Information -The Appendixes give general information and also suggestions for inclusions to be made elsewhere by the specifier and are not a part of this specification. The work shall be properly coordinated with the work of other trades.

Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

ASTM C1047-99(2004) 石膏墙板和石膏层板基底用附件的标准规范

1.1 This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer plaster to protect edges and corners and to provide architectural features (see Fig. 1).1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units in parentheses are provided for information purposes only. The SI equivalents of inch-pound units may be approximate.

Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base