Q62 石膏制品 标准查询与下载

NF P72-203-1/A1:2003 DTU 25.41.建筑工程.石膏纤维板施工.石膏墙板.第1部分:技术规范

DTU 25.41 - Building works - Gypsum plasterboard works - Gypsum wallboards - Part 1 : technical specifications.

NF P72-203-2/A1:2003 DTU 25.41.建筑工程.专门合同.石膏纤维板施工.石膏墙板.第2部分:特殊条款

DTU 25.41 - Building works - Private contracts - Gypsum plasterboard works - Gypsum wallboards - Part 2 : special clauses.

GA 238-2003 防止霉菌生长于石膏板准则

Gypsum board does not generate or support the growth of mold when it is properly transported, stored, handled, installed, and maintained. However, mold spores are present everywhere and when conditions are favorable, mold can grow on practically any surface. Observing these guidelines will help minimize the potential for mold growth on gypsum board. GYPSUM BOARD MUST BE KEPT DRY to prevent the growth of mold.

GUIDELINES FOR PREVENTION OF MOLD GROWTH ON GYPSUM BOARD

GA 231-2003 水对石膏板损害评估

In general, gypsum board should not be exposed to elevated levels of moisture for extended periods. Examples of elevated levels of moisture include, but are not limited to, exposure to rain, condensation, water leakage, and standing water.

Assessing Water Damage to Gypsum Board

ASTM C955-03 螺钉安装石膏板及金属熟石膏基板用承重(横向及轴向)钢骨、导板、系杆或隔栅撑标准规范

1.1 This specification covers steel studs, runners (tracks), and bracing or bridging (with a base metal thickness range of not less than 0.0329 in. (0.836 mm)) for screw application of gypsum panel products and metal plaster bases in load-bearing (transverse and axial) construction assemblies. Steel of lesser thickness shall be permitted in additional engineered products.1.2 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are provided for information purposes only.1.3 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

ASTM C36/C36M-03 石膏墙板用标准规范

1.1 This specification covers gypsum wallboard which is designed to be used for walls, ceilings, or partitions and affords a surface suitable to receive decoration. Note 18212;Specification C 840 contains application procedures for gypsum wallboard.1.2 The values stated in either inch-pound or SI (metric) units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined.1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for Gypsum Wallboard

ASTM C840-03 石膏板的加工和应用的标准规范

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-Ply Gypsum Board to Wood Framing Members 8II Application of Two-Ply Gypsum Board to Wood Framing Members9III Application of Gypsum Board by Adhesive Nail-On to Wood Framing Members10IV Semi-Solid Gypsum Board Partitions11V Solid Gypsum Board Partitions12VI Application of Gypsum Board with Adhesives to Interior Masonry or Concrete Walls13VII Application of Gypsum Board to Rigid Foam Insulation14VIII Application of Gypsum Board to Steel Framing and Furring15IX Arches and Bending Radii16X Application of Gypsum Board to Receive Tile by Adhesive Application17XI Exterior Application of Gypsum Wallboard and Exterior Gypsum Soffit Board18XII Floating Interior Angles19XIII Control (Expansion) Joints20XIV Foil-Backed Gypsum Board21 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.7 The following precautionary caveat pertains only to Sections 6-23. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7.1 For specific precautionary statements, see 4.1.1, 4.1.2 and 22.5.

Standard Specification for Application and Finishing of Gypsum Board

ASTM C473-03 石膏板制品的标准物理试验方法

1.1 These test methods cover the physical testing of gypsum panel products.1.2 The test methods appear in the following order:SectionFlexural Strength (Method A)7Core, End and Edge Hardness (Method A)8Nail Pull Resistance (Method A)9Flexural Strength (Method B)11Core, End and Edge Hardness (Method B)12Nail Pull Resistance (Method B)13Humidified Deflection14End Squareness15Nominal Thickness16Recessed- or Tapered Edge Depth17Width18Length19Water Resistance of Core-Treated Water-Repellent Gypsum Panel Products20 Surface Water Resistance of Gypsum Panel Products with Water-Repellent Surfaces21 1.3 The text of these test methods references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of these test methods.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Testing of Gypsum Panel Products

GA 610-2002 石膏板保护膜的抗火功能

Dividing buildings into distinct fire-protected areas is typically accomplished by providing fireresistance rated separations between those areas. This type of separation is easily achieved by the use of gypsum board applied to either wood or steel framing members. These fire-rated separations are usually provided as total assemblies, consisting of the structural member, the gypsum board and structural flooring material (if a floor/ceiling assembly). Listings of many firerated assemblies or Designs are found in the GA- 600, UL Fire Resistance Directory, etc.

FIRE RESISTANCE PROVIDED BY GYPSUM BOARD MEMBRANE PROTECTION

ASTM C11-02 石膏及相关建筑材料和系统的标准术语

1.1 This standard contains terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems

ASTM C840-02 石膏板的加工和应用的标准规范

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-Ply Gypsum Board to Wood Framing Members 8II Application of Two-Ply Gypsum Board to Wood Framing Members9III Application of Gypsum Board by Adhesive Nail-On to Wood Framing Members10IV Semi-Solid Gypsum Board Partitions11V Solid Gypsum Board Partitions12VI Application of Gypsum Board with Adhesives to Interior Masonry or Concrete Walls13VII Application of Gypsum Board to Rigid Foam Insulation14VIII Application of Gypsum Board to Steel Framing and Furring15IX Arches and Bending Radii16X Application of Gypsum Board to Receive Tile by Adhesive Application17XI Exterior Application of Gypsum Wallboard and Exterior Gypsum Soffit Board18XII Floating Interior Angles19XIII Control (Expansion) Joints20XIV Foil-Backed Gypsum Board21 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.7 The following precautionary caveat pertains only to Sections 6-23. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7.1 For specific precautionary statements, see 4.1.1 , 4.1.2 and 22.5.

Standard Specification for Application and Finishing of Gypsum Board

ASTM C1546-02(2008)e1 隐蔽式天花板辐射加热系统中石膏制品安装的标准指南

The purpose of this guide is to provide information to gypsum product installers for the avoidance of hazards associated with the installation of gypsum products adjacent to, or surrounding, electric heating components and conductors; and to avoid damage to gypsum products when used in conjunction with a concealed radiant heating system. The information given in this guide is applicable to repair of existing cable heating systems and to new construction of radiant heating systems constructed from flexible radiant heating panels.1.1 This guide provides information for trades installing gypsum products in conjunction with a concealed radiant ceiling heating system constructed from thin sheet flexible radiant heating panels, and for the installation of gypsum products after repair of existing concealed radiant ceiling heating systems constructed from heating cable or thin sheet flexible radiant heating panels. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This guide does not purport to address any aspect of concealed radiant heating system design or performance, and is limited to the proper installation of gypsum products specified for use in a concealed radiant ceiling heating system. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.5 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard.

Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

ASTM C11-02a 石膏及相关建筑材料和系统的标准术语

1.1 This standard contains terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems

KS F 3514-2001 石膏板用钉子

이 규격은 석고판용 못(이하 못이라 한다.)에 대하여 규정한다.

Gypsum boards nails

NF P72-510*NF EN 12860:2001 石膏块材用石膏基胶粘剂.定义、要求和试验方法

Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods.

KS L 5313-2001 水泥用石膏

이 규격은 시멘트 응결 지연제로 사용하는 천연 석고(이하 석고라 한다.)에 대하여 규정한다

Gypsum for portland cement retarder

BS EN 12859:2001 石膏块材.定义、要求和试验方法

Characteristics of blocks for the construction of non-load bearing partitions, independent wall-linings, fire protection of columns, lift shafts etc.

Gypsum blocks - Definitions, requirements and test methods

BS EN 12860:2001 石膏块材用石膏基胶粘剂.定义、要求和试验方法

Characteristics and performance specifications of gypsum-based adhesives for assembling gypsum blocks/units.

Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods

GA 235-2001 石膏板典型的机械和物理性能

The properties described herein were either obtained from laboratory tests conducted under controlled test conditions as set forth in appropriate standards, compiled from manufacturers' literature, or taken from the minimum requirements of appropriate ASTM Standard Specifications. The values reported below are provided for information and convenience only. Consult manufacturer for more specific values.

GYPSUM BOARD TYPICAL MECHANICAL AND PHYSICAL PROPERTIES

ASTM C11-01 石膏及相关建筑材料和系统的标准术语

1.1 This standard contains terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems