Q71 木构配件 标准查询与下载

DIN EN 13226:2009 木地板.带舌和/或榫的实木拼花地板构件.英文版本DIN EN 13226-2009-09

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for which a separate standard is in course of preparation. This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues; English version of DIN EN 13226:2009-09

NF B53-655*NF EN 13226:2009 木质复合地板.有槽和/或榫舌的实木地板块

Wood flooring - Solid wood parquet elements with grooves and/or tongues.

DIN EN 409:2009 木材构件的试验方法.榫型紧固件屈服力矩的测定.英文版本DIN EN 409:2009-08

This European Standard specifies a method for determining the yield moment of dowel type fasteners.

Timber structures - Test methods - Determination of the yield moment of dowel type fasteners; English version of DIN EN 409:2009-08

SANS 545:2009 木门

Specifies the requirements for wooden doors of three exposure classes and three performance classes.

Wooden doors

BS EN 13226:2009 木地板.带舌和/或榫的实木拼花地板构件

This European Standard specifies the characteristics of solid parquet elements with grooves and/or tongues for internal use as flooring. This standard is not applicable to panels made from elements for which a separate standard is in course of preparation. This standard covers elements with or without surface treatment.

Wood flooring - Solid parquet elements with grooves and/or tongues

LY/T 1855-2009 木制百叶窗帘和百叶窗用叶片

本标准规定了木制百叶窗帘和百叶窗用叶片的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于木制百叶窗帘和百叶窗用叶片（简称叶片），本标准不适用于胶合板和纤维板等人造板制叶片。

Slats of wooden blind and shutter

ISO 27567:2009 单板层积材.尺寸规格与形状的测量.试验方法

This International Standard describes the methods for determining the thickness, length, width, spring, bow, twist and section squareness and cupping of test pieces of structural laminated veneer lumber (LVL), as specified in ISO 18776.

Laminated veneer lumber - Measurement of dimensions and shape - Method of test

NF P63-202-1-2:2009 镶木地板.胶合镶木地板.第1-2部分:材料选择用通用标准

Parquet - Parquet to be glued - Part 1-2 : general criteria for selection of materials.

NF P63-202-2:2009 镶木地板.胶合镶木地板.第2部分:特殊条款合同单

Parquet - Parquet to be glued - Part 2 : contract bill of special clauses.

NF P63-202-1-1:2009 镶木地板.胶合镶木地板.第1.1部分: 技术条款承包标书

Parquets - Parquets to be glued - Part 1-1 : contract bill of technical clauses.

NF B52-001/A1:2009 建筑木材的使用管理规则.建筑物中使用的法式针叶木材和阔叶锯材的目视分类

Regulations governing the use of timber in structure - Visual classification for the use of French coniferous and deciduous sawn timber in structures.

DIN EN 15644:2009 实心木制传统设计型预制楼梯 规范和要求

This European Standard gives specifications and requirements for prefabricated stairs made of solid wood, i.e. where the components contributing to the fulfilment of mechanical resistance and stability characteristics are made of solid wood. These stairs are traditionally designed. NOTE 1 If the filling of the guarding does not contribute to the mechanical stability and resistance, the used material is not relevant. NOTE 2 Examples of traditionally made/designed stairs are given in Annex E. This European Standard covers: stairs either pre-assembled, partly pre-assembled or in component form including balustrades and handrails for internal or external use. This European Standard does not consider the contribution of these elements to the overall structure design. The ability of a stair to contribute to the overall stability of the works or to the strength of the structure is not covered by this standard. Carpets on stairs are not covered by this Standard. i The surfaces of the wooden elements may be exposed or covered by finishes. Where stairs are supplied with a finish or covering, aesthetic or visual characteristics will not be covered by this Standard and references shall be made to the appropriate product standard (e.g. colour fastness of carpet finishes).

Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements; German version EN 15644:2008

BS 644:2009 木窗.各种类型的完全抛光工厂装配的窗户.规范

This British Standard specifies requirements for the design, construction and performance of fully finished and glazed factory?assembled timber windows of various types. This British Standard applies to windows that have been treated with either opaque or non?opaque finishes or that are designed to support an externally fixed covering of another material, and that have been factory-glazed. It does not apply to windows supplied as kits for site assembly. It applies to windows fabricated into frames in a factory, to be installed vertically (±15°) into the external face of buildings, as single or multi?light units, in coupled assemblies when appropriate, of the following types: hinged: side-hung (open in or out), top-hung a) (open out), bottom hung (open in), tilt and turn or turn before tilt; b) projecting: side-hung (open in or open out) and top-hung (open out); c) pivoted: horizontal and vertical (hung centrally or off?centre); d) sliding: horizontal and vertical; e) side-hung and top-hung (open out) fully reversible; f) fixed light; g) direct glazed frames.

Timber windows – Fully finished factory-assembled windows of various types – Specification

SANS 10043:2009 木材及层压地板安装

Deals with the general principles of the installation of solid wood as well as floating wood flooring.

The installation of wood and laminate flooring

NF B53-645*NF EN 13696:2009 木地板.弹性、抗磨损和抗冲击测定用试验方法

Wood Flooring - Test methods to determine elasticity and resistance to wear and impact resistance.

NF B54-178:2009 实木板材(SWP).要求

Solid wood panels (SWP) - Requirements.

DIN EN 13696:2009 木地板.弹性、抗磨损和抗冲击测定用试验方法

This European Standard specifies a test method to determine the resistance to wear of lacquered wood floorings, a method to test the elasticity of the lacquer and a method to determine resistance to impact of lacquered wood floorings.

Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance; English version of DIN EN 13696:2009-02

BS EN 13696:2008 木地板.耐磨损和冲击的弹性测定用试验方法

This European Standard specifies a test method to determine the resistance to wear of lacquered wood floorings, a method to test the elasticity of the lacquer and a method to determine resistance to impact of lacquered wood floorings.

Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance

NF P84-207-1-2:2008 建筑工程.带防水涂层的承重木材和木制板屋顶.第1-2部分:材料选择的通用标准(GCM)

Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 1-2 : general criteria for selection of materials (GCM).

NF P84-207-1-1:2008 建筑工程.带防水涂层的承重木材和木制板屋顶.第1-1部分:技术规范

Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 1-1 : technical specifications.