Q71 木构配件 标准查询与下载

NF P67-103-1-1:2007 活动地板(自由拼接).组成部件.实施.第1-1部分:技术规范

Raised access floor (free access) - Constituent components - Execution - Part 1-1 : technical specifications.

NF P67-103-1-2:2007 活动地板(自由拼接).组成部件.实施.第1-2部分:材料选择的一般标准

Raised access floor (free access) - Constituent components - Execution - Part 1-2 : general criteria for selection of materials.

NF P67-103:2007 活动地板(自由拼接).组成部件.实施.第1-1部分:技术规范.第1-2部分:材料选择的一般标准.实施.第2部分:特殊条款合同单

Raised access floor (free access) - Constituent components - Execution - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials - Execution - Part 2 : contract bill of special clauses.

DIN EN 13629 Berichtigung 1:2007 木地板.预安装实木硬木地板

Wood flooring - Solid pre-assembled hardwood board; German version EN 13629:2002, Corrigenda to DIN EN 13629:2003-06; German version EN 13629:2002/AC:2007

DIN EN 13227 Berichtigung 1:2007 木地板.实木拼花地板制品

Wood flooring - Solid lamparquet products; German version EN 13227:2002, Corrigenda to DIN EN 13227:2003-06; German version EN 13227:2002/AC:2007

DIN EN 13228 Berichtigung 1:2007 木地板.包括有联锁系统地板块的实木表层地板构件

Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system; German version EN 13228:2002, Corrigenda to DIN EN 13228:2003-06; German version EN 13228:2002/AC:2007

BS 4592-0:2006+A1:2012 工业用地板, 楼梯踏板和扶手. 第0部分: 安装的通用设计要求和建议

This part of BS 4592 specifies requirements for the design,manufacture,supply and installation of text deleted flooring and stair treads and handrails for industrial use for manufacturers and suppliers that are common to BS 4592 (all parts)

Flooring,stair treads and handrails for industrial use.Part 0:Common design requirements and recommendations for installation

BS EN 14673:2006 机械安全.钢和有色金属锻制的液压动力开模热锻锻压机的安全要求

This European Standard applies to: ? hydraulically powered open die forging presses for hot working; ? handling and cooling equipment connected with the control system of the forging line, e. g., manipulators, rotating type handling devices, die shifting devices, table devices and tool changing devices; ? handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, turnover or handling devices attached to fork lift trucks or cranes etc. It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal. This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment. This European Standard deals with all significant hazards, hazardous situations and events relevant to hydraulically powered hot forging presses when they are used as intended and under conditions foreseeable by the manufacturer (see Clause 4). This European Standard does not cover: ? hydraulically controlled closed die forging presses for hot working; ? mechanically powered hot forging presses; ? mobile manipulators as defined in 3.4.2; ? standard transport and lifting equipment modified for use with material manipulation devices, turnover and handling devices such as for fork lift trucks and cranes. This European Standard is not applicable to machinery which was manufactured before the date of publication of this standard by CEN.

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

BS 1722-11:2006 栅栏.预制木栅栏用规范

This part of BS 1722 specifies requirements for the materials, design, construction and installation of prefabricated wood panel fences constructed from softwood panels fixed between timber or concrete posts. This standard does not cover fences of a height greater than 2 m above ground level. This standard includes requirements for protective treatments. However, maintenance requirements of the fence after installation are outside the scope of this standard. It specifies requirements for the components that make up a fence and the way in which the fence should be constructed. The standard includes requirements for component dimensions, together with the permissible tolerances on size. These are minimum requirements and it will normally be acceptable to use larger sizes, except if this could adversely affect the fitting of components or if replacement parts are required to match with those already present.

Fences - Specification for prefabricated wood panel fences

BS 1722-7:2006 栏栅.木柱和栏栅用规范

This part of BS 1722 specifies requirements for wooden post and rail fences, using both sawn and cleft components. It includes requirements for the installation of the fencing at the specified location.

Fences - Specification for wooden post and rail fences

BS 1722-5:2006 栏栅.第5部分:鱼鳞板围栏和木质栅栏围篱的规范

This part of BS 1722 specifies requirements for close-boarded and wooden palisade fences. It includes requirements for the installation of the fencing at the specified location. This standard specifies requirements for protective treatments. However, maintenance, which is an important aspect of extending the service life of the fence, is outside the scope of this standard. This standard includes requirements for sizes of components, together with the permissible tolerances on size. These are minimum requirements and it will normally be acceptable to use larger sizes, except if this could adversely affect the fitting of components or if replacement parts are required to match with those already present.

Fences.Part 5:Specification for close-boarded fences and wooden palisade fences

BS EN 14221:2006 窗内、门框和内门扇用木材和木制材料.要求和规范

This European Standard specifes principle material requirements for timber and wood-based products in internal windows, doors and doorframes (with or without fixed parts), including appearance, biologicaldu rability and other physical characteristics. This European Standard applies to factory assembled internal windows, door leaves and doorframes uncoated or intended to be coated. If doors are covered by other decorative veneers or films the respective veneer or film Product Standard shall apply.

Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications

BS EN 14220:2006 窗内、外框和外门扇用木材和木制材料.要求和规范

This European Standard specifies principle material requirements for timber and wood-based products in external windows, external door leaves and external doorframes (with or without fixed parts), including those relating to appearance, biological durability and other physical characteristics. This European Standard applies to assembled windows, external door leaves and external doorframes uncoated or intended to be coated. If windows or doors are covered by other decorative veneers or films their respective veneer of film Product Standard shall apply.

Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications

NF B53-675:2006 实心木质镶板和贴面层.特性、合格评定和标记

Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking.

BS EN 14761:2006+A1:2008 木地板.实木拼花地板.垂直指针和模块砖

This European Standard specifies the characteristics of solid vertical and wide finger as well as Module brick including the laying units made of softwood or hardwood for internal use as flooring. This standard covers products without surface treatments. This standard covers also treated or untreated elements.

Wood flooring - Solid wood parquet - Vertical finger and module brick

WB/T 1024-2006 木质门

本标准规定了木质门的分类、规格、标记、材料、要求、检验与试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于室内用木质门的生产和检验。

Wood door

BS EN 14342:2005 木地板.特性、合格评估和标记

This document defines and specifies for wood and parquet flooring the relevant characteristics and the appropriate test methods to determine these characteristics for internal use as flooring. It also applies to wood veneer floor coverings. This document covers flooring defined in EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, prEN 14761 and EN 14354. It does not specify dimensional limits or tolerances, which are given by these same standards. It provides for the evaluation of conformity and the requirements for marking these products. This document does not apply to products sold as tactile surfaces or to aid visibility, e.g. products sold with tactile or visible strip applied.

Wood flooring — Characteristics, evaluation of conformity and marking

BS EN 14342:2005+A1:2008 木地板.特性、一致性评估和标记

This European Standard defines and specifies for wood and parquet flooring products the relevant characteristics, requirements and appropriate test methods to determine these characteristics when used as internal flooring, including enclosed public transport premises. It also applies to wood veneer floor coverings. This document covers flooring defined in EN 13226, EN 13227, EN 13228, EN 13488, EN 13489, EN 13990, EN 13629, EN 14761 and EN 14354. It does not specify dimensional limits or tolerances, which are given by these same standards. !This European Standard provides also for the evaluation of conformity and the requirements for marking these products. This document covers also the wood and parquet flooring products which may be treated to improve their reaction to fire performance. This European Standard does not apply to the wood and parquet flooring products with tactile surfaces or to aid visibility, e.g. products with tactile or visible strip applied.

Wood flooring - Characteristics, evaluation of conformity and marking

DIN EN 14081-1:2006 木结构.矩形截面的强度分级结构木材.第1部分:一般要求.德文版本EN 14081-1-2005

This European Standard lays down the requirements for visual and machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336. This standard identifies the characteristics for which, as a minimum, limits shall be given in visual grading rules.

Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements; English version of DIN EN 14081-1:2006-03

DIN EN 14081-3:2006 木结构.矩形截面强度分级结构木材.第2部分:机械分级.工厂生产控制的附加要求.德文版本 EN 14081-3-2005

This European Standard specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.

Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control; English version of DIN EN 14081-3:2006-03