Q73 金属构配件 标准查询与下载
共找到 430 条与 金属构配件 相关的标准，共 29 页
This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing. These profiled roof sheets are designed to keep wind, rain and snow out of the building, and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; English version of DIN EN 508-2:2009-07
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2009-07
- 实施
This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet; English version of DIN EN 506:2009-07
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2009-07
- 实施
This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from stainless steel sheet with or without additional metallic and/or organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; English version of DIN EN 508-3:2009-07
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2009-07
- 实施
This Japanese Industrial Standard specifies the single pipe of welded steel pipe piles (hereafter referred to as "piles")used in the foundation such as civil engineering works, architecture and the like.
Steel pipe piles
- ICS
- 77.140.75;93.020
- CCS
- Q73
- 发布
- 2009-06-20
- 实施
Partitions and wall linings with gypsum boards on metal framing - Part 1: Cladding with gypsum plasterboards
- ICS
- 91.060.10
- CCS
- Q73
- 发布
- 2009-05
- 实施
This British Standard specifies requirements for the design, construction and performance of aluminium alloy windows and glazed doorsets, solid or thermally improved, intended to be installed vertically (±15°), including constituent materials and glazing.
Aluminium alloy windows and doorsets – Specification
- ICS
- 91.060.50
- CCS
- Q73
- 发布
- 2009-02-28
- 实施
- 2009-02-28
Provides a reference to Supplement 1 to AISI S213-07 and a revision to the target reliability index for composite interior wall studs in Section F1.1 of the existing standard. The Supplement will also include errata.
Supplement No. 1 to the North American Specification for the Design of Cold-Formed Steel Structural Members, 2007 Edition
- ICS
- 91.080.10
- CCS
- Q73
- 发布
- 2009
- 实施
The formation of reproducible, durable adhesive bonds in structural units requires great care in the performance of the steps in the bonding process. Experience has shown that adhesive bonding carried out in accordance with this practice produces reproducible adhesive bonds. This practice is applicable to both the Type 1, 71°C (160°F), and Type 2, 93°C (200°F), elevated humidity service type of foam and beam shelter.1.1 This practice covers the materials, processes, and quality controls to be used in the manufacture of adhesive-bonded, aluminum-faced, foam core sandwich panels for tactical shelters. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
- ICS
- 83.180 (Adhesives)
- CCS
- Q73
- 发布
- 2009
- 实施
이 표준은 KS F 2297에 규정하는 시험 항목 중 창호의 단열성 시험방법에 대하여 규정
Test method of thermal resistance for windows and doors
- ICS
- 91.060.50
- CCS
- Q73
- 发布
- 2008-12-30
- 实施
- 2008-12-30
이 표준은 주로 철제문에 사용하는 피벗 힌지(이하 힌지라 한다.)에 대하여 규정한다.
Pivot hinge
- ICS
- 21.080;91.060.50
- CCS
- Q73
- 发布
- 2008-12-30
- 实施
- 2008-12-30
이 표준은 바닥 난방을 이용한 건축물에 있어 온돌 배관을 일정한 간격으로 배치 위하여 사용
Heating pipe metal objects for building
- ICS
- 91.06
- CCS
- Q73
- 发布
- 2008-12-30
- 实施
- 2008-12-30
Covers steel door frames (with or without fanlight frames) for walk-through doors.
Steel door frames
- ICS
- 77.140.70;91.060.50
- CCS
- Q73
- 发布
- 2008-12-12
- 实施
本标准规定了住宅轻钢装配式构件的分类与代号、要求、试验方法、检验规则、标志、包装、运输与贮存等。 本标准适用于冷弯薄壁型钢构件。
Steel members of assembled residential buildings with light-weight steel framing
- ICS
- CCS
- Q73
- 发布
- 2008-11-13
- 实施
- 2009-03-01
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1 : steel.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration. It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this EN. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.
Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods
- ICS
- 91.100.10
- CCS
- Q73
- 发布
- 2008-08-31
- 实施
- 2008-08-31
This standard specifies the adhesive films for glazing, to be used for windows entrances and exits in building( hereafter referred to as"films"). Organic glass is not included in the glass as referred to in this Standard.
Adhesive films for glazings
- ICS
- 83.140.10;91.100.99
- CCS
- Q73
- 发布
- 2008-06-20
- 实施
- 2008-06-20
