Q73 金属构配件 标准查询与下载

JG/T 307-2011 建筑用电动控制排烟侧窗

本标准规定了电动控制排烟侧窗的术语和定义、分类、代号和规格、材料、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于工业与民用建筑电动控制排烟侧窗。

Electrodynamic control smoke venting side-window for buildings

JG/T 308-2011 建筑门用提升推拉五金系统

本标准规定了建筑门用提升推拉五金系统的术语和定义、代号和标记、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑门用提升推拉五金系统。

Building hardware for doors.Lift and slide hardware system

JG 175-2011 建筑用隔热铝合金型材

本标准规定了建筑用隔热铝合金型材的术语、定义和符号、分类和标记、材料及一般要求、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑门窗、幕墙采用的穿条或浇注方式复合成的隔热型材。

Insulating aluminum alloy profiles with thermal barrier for building

ANSI/SDI C-2011 复合钢板楼面承接板-台面板标准

SDI-C-2011 is a revision of the existing ANSI/SDI-C1.0 standard. SDI-C-2011 is a standard for composite steel floor deck to be used by designers, specifiers, manufacturers, and installers of composite steel floor deck-slabs. The specification sets guidelines and requirements relating to quality assurance, materials, design, materials handling, and installation of composite steel floor deck. Non-mandatory user notes are included for further clarification and guidance.

Standard for Composite Steel Floor Deck-Slabs

ASME B31.9-2011 建筑结构用管

This document has rules for the piping in industrial, institutional, commercial, and public buildings, and multi-unit residences, which does not require the range of sizes, pressures, and temperatures covered in B31.1. This Code prescribes requirements for the design, materials, fabrication, installation, inspection, examination, and testing of piping systems for building services. It includes piping systems in the building or within the property limits.

Building Services Piping

ANSI A250.10-2011 钢质门和门框的钢表面的测试规程和验收标准

Prescribes the procedures to be followed in the selection of material, chemical preparation, painting, testing, and evaluation of prime painted steel surfaces for steel doors and frames.

Test Procedure and Acceptance Criteria for Prime Painted Steel Surfaces for Steel Doors and Frames

KS F 4538-2010 杯子用合页

이 표준은 주로 가구용 문에 사용하는 컵 힌지(이하 힌지라 한다.)에 대하여 규정한다.

Cup-hinges

NF A03-720-2:2010 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维.

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.

KS F 4536-2010 铝合金窗用纱窗

이 표준은 주로 KS F 3117에 규정하는 알루미늄 합금제 또는 강철제 창(이하 창이라

Screens for windows

JIS A 6517:2010 建筑物中墙和天花板用钢制罩面板条

Steel furrings for wall and ceiling in buildings

BS EN 1856-2:2009 烟囱.金属制烟囱要求.金属衬垫和连接烟道管

This document specifies the performance requirements for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports). Vitreous enamelled connecting flue pipes are also covered by this document. Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys. Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this document. This document also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Single wall and multi-wall system chimney products are covered by EN 1856-1.

Chimneys - Requirements for metal chimneys - Metal flue liners and connecting flue pipes

JG/T 138-2010 建筑玻璃点支承装置

本标准规定了建筑玻璃点支承装置的术语和定义、分类、命名和标记、要求、试验方法、检验规则、产品标志、产品合格证、产品使用说明书、包装、运输及贮存。 本标准适用于点支承玻璃幕墙、采光顶、雨篷和护栏等建筑用玻璃点支承装置,其他板材用点支承装置可参照使用。

Point supporting device for architectural glass

JG/T 268-2010 建筑用闭门器

本标准规定了建筑用闭门器的术语和定义、分类和标记、材料、要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于一般工业和民用建筑中门用闭门器。

Door closer for building

EN 14351-1:2006+A1:2010 窗户和门.产品标准,性能特点.第1部分:具无抗火和/或漏烟特点的门窗和外行人门

This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: Manually or power operated windows, French windows and screens for installation in vertical wall apertures and roof windows for installation in inclined roofs, complete with: related hardware, if any; weather stripping, if any; glazed apertures when intended to have glazed apertures; with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are; fully or partially glazed including any non-transparent infill; fixed or partly fixed or openable with one or more casements/sashes (e. g. hinged, projecting, pivoted, sliding). Manually operated external pedestrian doorsets with flush or panelled leaves, complete with: integral fanlights, if any; adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 16034 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 16034); rooflights according to EN 1873 and prEN 14963; curtain walling according to EN 13830; industrial, commercial and garage doors and gates according to EN 13241-1; internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance requirements given in clause 4 can be relevant for internal doors (see prEN 14351-2); revolving doorsets; windows for escape routes.

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

SANS 28:2010 空心墙用金属带

Covers the dimensional and material requirements of metal ties suitable for walls having cavity widths of up to the largest likely to be found in masonry walling constructed to dimensionally co-ordinated sizes.

Metal ties for cavity walls

ANSI/SJI CJ-2010 CJ系列合成钢横梁标准规范

General Revision

Standard Specifications for Composite Steel Joists, CJ-Series

DIN EN 508-1 Berichtigung 1:2009 金属板材屋面产品.自身技术规范.支持钢.铝或不锈钢板材产品.第1部分:钢,德文版本 EN 508-1:2008,DIN EN 508-1:2009-07勘误表

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2008, Corrigendum to DIN EN 508-1:2009-07

DIN EN 508-3 Berichtigung 1:2009 金属薄板屋面制品.钢,铝或不锈钢薄板制半支撑屋面制品规范.第3部分:不锈钢,德文版本 EN 508-3:2008,针对 DIN EN 508-3:2009-07的勘误表

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2008, Corrigendum to DIN EN 508-3:2009-07

JIS A 5526 ERRATUM 1:2009 勘误表

ERRATUM

DIN EN 508-1:2009 金属制屋面产品.钢,铝和不锈钢薄板材自撑式产品规范.第1部分:钢,DIN EN 508-1:2009-07的英文版本

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; English version of DIN EN 508-1:2009-07