Q82 供气器材设备 标准查询与下载

DIN ISO 16486-6:2015 气体燃料供给用塑料管道系统.带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统.第6部分:设计,操作和安装实施规程(ISO 16486-6-2012)

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation (ISO 16486-6:2012)

DIN ISO 16486-3:2015 气体燃料供给用塑料管道系统.带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统.第3部分:配件(ISO 16486-3-2012+AMD 1-2014)

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2012 + AMD 1:2014)

DIN EN 61207-7:2015 气体分析器性能表示.第7部分:可调谐半导体激光气体分析器(IEC 61207-7-2013);德文版本EN 61207-7-2013

Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (IEC 61207-7:2013); German version EN 61207-7:2013

DIN ISO 16486-1:2015 气体燃料供给用塑料管道系统.带有热熔接头和机械接头的不加增塑剂的聚酰胺(PA-U)管道系统.第1部分:总则(ISO 16486-1-2012+AMD 1-2014)

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)

BS EN 13611:2015 燃烧器和装置用气态和/或液态燃料的安全和控制设备. 通用要求

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements

JJF 1261.18-2015 交流接触器能源效率标识计量检测规则

本规范规定了额定频率50 Hz、额定工作电压为380 V (400 V)、额定工作电流6 A～630 A的直动式、三极机电式、控制回路输入电源为交流的整体式交流接触器的能源效率标识计量要求、计量检测程序、计量检测方法、计量检测结果评定准则和检测报告等内容。 本规范不适用于外加节电装置、家用和类似用途的接触器及半导体接触器(固态接触器)。 本规范适用于交流接触器能源效率标识计量监督检测，委托检测可参考本规范进行。生产和销售交流接触器产品的单位亦可参照本规范进行检测。 接受检测的交流接触器应是生产者自检合格的产品，或者是销售者进口、销售的商品。

Rules of Metrology Testing for Energy Efficiency Label of AC Contactors

EN 15502-1:2012+A1:2015 燃气式供热锅炉.第1部分:一般要求和测试

This European Standard specifies the common requirements and test methods concerning, in particular the construction, safety, fitness for purpose, and rational use of energy, as well as the classification, marking and energy labelling of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as "boilers". This European Standard is to be used in conjunction with the specific Parts 2 (Part 2-1 and following ones). This European Standard applies to boilers of types B and C. NOTE For further background information on appliance types see CEN/TR 1749:2014 [1]. a) that use one or more combustible gases of the three gas families at the pressures stated in EN 437; b) where the temperature of the heat transfer fluid does not exceed 105 °C during normal operation; c) where the maximum operating pressure in the water circuit does not exceed 6 bar; d) which can give rise to condensation under certain circumstances; e) which are declared in the installation instructions to be either a "condensing" boiler or a "low temperature boiler" or a "standard boiler" or an "other boiler". If no declaration is given the boiler is to be considered both a "standard boiler" and an "other boiler"; NOTE The Ecodesign Directive defines "other boilers", "low temperature boilers" and "condensing boilers". The Boiler Efficiency Directive defines "standard boilers", "low temperature boilers" and "condensing boilers". Depending on the legislation applied, a boiler can be both "a standard boiler" and an "other boiler". f) which are intended to be installed inside a building or in a partially protected place; g) which are intended to produce hot water either by the instantaneous or storage principle, the whole being marketed as a single unit. This European Standard applies to boilers designed for sealed water systems or for open water systems. This general standard and the specific standards (see Part 2) provide requirements for boilers with known constructions. For boilers with any alternative constructions, which might not fully be covered by this standard or a specific standard, the risk associated with this alternative construction will need to be assessed. An example of an assessment methodology, based upon risk assessment, is given in Clause 11. This European Standard is not intended to cover appliances intended for connection to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance.

Gas-fired heating boilers - Part 1: General requirements and tests

BS EN 26:2015 家用热水生产用燃气快热式热水器

Gas-fired instantaneous water heaters for the production of domestic hot water

BS EN 12007-3:2015 天然气基础设施 最大工作压力可达 16bar 的管道 钢材的具体功能要求

Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for steel

EN 26:2015 供应家用热水的燃气式瞬时水加热器

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called "water heaters". This European Standard applies to water heaters:- of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749; - fitted with atmospheric burners; - equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners; - using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437; - of nominal heat input not exceeding 70 kW; - with an ignition burner or with direct ignition of the main burner. In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi). This European Standard does not contain all the requirements necessary for; - boiling water appliances; - appliances intended to be connected to a mechanical means of evacuating the combustion products; - appliances which fulfil a dual role of space heating and heating water for sanitary use; - appliances making use of the heat of condensation of the water contained in the combustion products; - water heaters of types B21, B31, B41, B42, B43 and B51. This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance. This European Standard; - does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device; - takes account of the information given in Technical Report CR 1472:1994 with respect to marking. The main symbols used in this European Standard are summarized in Annex F.

Gas-fired instantaneous water heaters for the production of domestic hot water

EN 13203-2:2015 燃气家用电器生产热水.第2部分:能源消耗的评估

This European Standard is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage tank appliances; waters-heaters and combination boilers that have: a heat input not exceeding 70 kW; and a hot water storage tank capacity (if any) not exceeding 500 l. In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit. EN 13203-1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.

Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption

EN 89:2015 供应家用热水的燃气式储水加热器

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called "appliance". This European Standard applies to appliances:- of selected types B1, B2, B3, B5, C1, C2, C3, C4, C5, C6, C7, C8, C9 according to CEN/TR 1749; - fitted with atmospheric burners; - using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437; - of nominal heat input not exceeding 150 kW (net calorific value); - fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger.

Gas-fired storage water heaters for the production of domestic hot water

EN 12309-2:2015 燃气吸附设备加热和/或冷却的净热量输入不超过70千瓦.第2部分:安全性

EN 12309 series: Appliances covered by this European Standard include one or a combination of the following: gas fired sorption chiller; gas fired sorption chiller/heater; gas fired sorption heat pump. This European Standard applies to appliances only when used for space heating and cooling with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: integral burners under the control of fully automatic burner control systems; closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated; mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), the standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Installations used for heating and/or cooling of industrial processes are not within the scope of these standards. NOTE All the symbols given in this text are used regardless of the language used. This Part 2 to EN 12309: This part of EN 12309 deals with the safety of gas-driven sorption heat pumps as defined in EN 12309-1. Only types B12 for outdoor installations, B13 for outdoor installations, B22 for outdoor installations, B23 for outdoor installations, C12 and C13, C32 and C33 are covered in this European Standard.

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety

DIN EN 12480:2015 煤气表.旋转位移式煤气表

Gas meters - Rotary displacement gas meters; German version EN 12480:2015

BS ISO 4437-4:2015 供应气体燃料用塑料管系统. 聚乙烯 (PE). 阀门

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Valves

DB31/T 907-2015 工商燃气供应工程技术规程

本标准规定了工商燃气供应工程中燃气供应系统、计算方法、燃气设备、供气管道、燃具和用气设备、信息远传和自动控制系统和竣工验收与运行维护的要求。 本标准适用于以天然气和管道液化石油气为气源的工商燃气用户的燃气供应工程，包括用户调压器、过滤器、计量装置、预警和自动处置系统、直至燃具和用气设备等所有工商用户终端应用的燃气设施、以及其连接的管道系统和涉及安全、节能环保、卫生和公共利益的自动控制与远传监测系统。

Technical specification of gas supply for commercial and industrial purpose

BS EN 12480:2015 煤气表.旋转位移煤气表

Gas meters. Rotary displacement gas meters

BS EN 50465:2015 使用气体燃料的加热功率联合系统的欧洲产品标准

European product standard for combined heating power systems using gas fuel

BS 7967:2015 用于测量住宅内一氧化碳和家用燃气器具燃烧性能的便携式电子燃烧气体分析仪使用指南

1.1This standard provides guidance for gas operatives on: a)the general use of an electronic portable combustion gas analyser conforming to BS EN 50379-3 and BS 7927:1998 incorporating Amendment No.1:1999; NOTE 1 This standard assumes that a portable combustion gas analyser [often referred to colloquially as a "flue gas analyser" (FGA)J of the type specified in BS EN 50379-3 or BS 7927:1998 incorporating Amendment No. 1:1999 is available to the gas operative and the operative is competent in its use and the interpretation of any reading obtained. This competence can be demonstrated by satisfactory completion of the relevant ACS assessments,which cover the use of electronic portable combustion gas analysers. See Clause 4 for further information on competence. NOTE 2 BS EN 50379-3 superseded BS 7927:1998 incorporating Amendment No. 1:1999 on I March 2007. However,electronic portable combustion gas analysers conforming to BS 7927:1998 incorporating Amendment No. 1:1999 remain acceptable for the purposes of this standard. b)the use of such an electronic portable combustion gas analyser to determine ambient levels of carbon monoxide (CO) and, in certain circumstances (see Notes 4 and 5, and Commentary on 8.1), detect the presence of carbon dioxide (CO) in dwellings; NOTE 3 A definition of a dwelling is given in 3.7. NOTE 4 One of the main combustion products from gas appliances is CO, which is mainly regarded as an asphyxiant, but is also a toxic substancc which could be present in the air in sufficient quantity to prove harmful. For guidance on the occupational health considerations of CO, reference can be made to the HSE Guidance note on Workplace exposure limits,EH4012005 [8]. NOTE 5 Electronic portable combustion gas analysers that calculate CO levels from an oxygen (O) measurement are: ?well proven for calculating CO levels in combustion gases in the flue of an appliance; ?not suitable for measuring ambient levels of CO in dwellings; and ?able to detect increases in the ambient CO levels in ambient atmospheres and such increases in CO will provide an early indication of increasing build-up of products of combustion in the room (see Commentary on 8.1). c)the use of an electronic portable combustion gas analyser to measure CO and CO in combustion products from the following types of gas-fired appliances: 1)flueless appliances (type A appliances); 2)open-flue appliances (type B appliances); 3)room-sealed appliances (type C appliances); and 4)all appliances for which the gas appliance manufacturer has provided a purpose-designed sampling point or specific sampling instructions; NOTE 6 Type A, type B and type C classification of gas-fired appliances is described in PD CENITR 1749 and in 3.21. d)the use of an electronic portable combustion gas analyser as a diagnostic instrument to assist a gas operative: 1)in confirming safe and/or efficient operation at the time of commissioning, in accordance with gas appliance instructions; 2)in determining the level of servicing required for a gas-fired appliance;

Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances

BS PD CEN/TR 1749:2014 依照燃烧产物的排空方法（类型）对燃气器具分类的欧洲计划

European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)