Q84 城市交通设施 标准查询与下载

DB11/T 776.1-2011 道路智能化交通管理设施设置要求 第1部分：通用技术条件

Requirements for setting up road intelligent traffic management facilities Part 1: General technical conditions

GA/T 484-2010 LED道路交通诱导可变信息标志

本标准规定了LED道路交通诱导可变信息标志的分类、命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于道路交通诱导可变标志的设计、制造和验收。

LED variable message sign of road traffic inducement

DB61/T 506.2-2010 城市轨道交通自动售检票系统 第2部分：编码规则

本部分适用于城市轨道交通自动售检票系统的编码。

Urban Rail Transit Automatic Fare Collection System Part 2: Coding Rules

DB61/T 506.4-2010 城市轨道交通自动售检票系统 第4部分：通信数据接口规范

本标准适用于陕西省城市轨道交通自动售检票系统通信数据接口的管理和维护。

Urban Rail Transit Automatic Fare Collection System Part 4: Communication Data Interface Specification

DB61/T 506.3-2010 城市轨道交通自动售检票系统 第3部分：终端设备及票卡技术规范

本部分适用于城市轨道交通路网中的终端设备的设计、制造和运营管理，以及票卡的选用。

Urban Rail Transit Automatic Fare Collection System Part 3: Technical Specifications for Terminal Equipment and Ticket Cards

DB61/T 506.1-2010 城市轨道交通自动售检票系统 第1部分：总则

本部分适用于指导城市轨道交通自动售检票系统编码规则、设备终端及票卡、通信数据接口等技术规范的制定。

Urban Rail Transit Automatic Fare Collection System Part 1: General Rules

NF P98-440-3*NF EN 1317-3:2010 道路限制系统.第3部分:缓冲垫的性能分类,冲击试验的验收标准和试验方法.

Road restraint systems - Part 3 : performance classes, impact test acceptance criteria and test methods for crash cushions.

NF P98-440-2*NF EN 1317-2:2010 道路约束系统.第2部分安全栅栏包括车辆护栏用效能类别,冲击试验验收准则和试验方法.

Road restraint systems - Part 2 : performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets.

BS EN 1317-1:2010 道路防护系统.第1部分:试验方法术语和通用准则

This European Standard contains provisions for the measurement of performance of products for the road restraint systems, under impact and impact severity levels, and includes: ? Test site data; ? Definitions for road restraint systems; ? Vehicle specification (including loading requirements) for vehicles used in the impact tests; ? Instrumentation for the vehicles; ? Calculation procedures and methods of recording crash impact data including impact severity levels; ? VCDI. The modifications included in this standard are not a change of test criteria, in the sense of EN 1317-5-2007+A1-2008, ZA.3.

Road restraint systems. Part 1: Terminology and general criteria for test methods

NF P98-351:2010 人行道.残疾人设施综合.警示警报.盲人或弱视者地面脚感提醒装置的特性和试验

Footways - Integration of disabled people - caution warning - Characteristics, testing and rules for ground installation of pedotactile caution warning devices for blind or partially sighted persons.

DIN VDE 0832-100:2010 道路交通信号系统.德文版本HD 638 S1-2001 + A1-2006

Road traffic signal systems; German version HD 638 S1:2001 + A1:2006

DIN EN 12966-1:2010 道路垂直标志. 可变信息交通标志. 第1部分: 产品标准; 德文版本EN 12966-1: 2005+A1: 2009

This document specifies requirements and test methods for new Variable Message Signs (VMS). VMS comprise two types, continuous and discontinuous signs:- continuous signs are those that are similar to fixed signs, the only difference being that by some electro-mechanical means they can show various messages. NOTE 1 For example rotating prism signs, roller blinds.- discontinuous signs create messages using individual elements that can be in one of two states (or more) and can thereby create various messages on the same sign face. NOTE 2 For example fibre optic signs, LED signs. This document covers the performance requirements for Variable Message Signs used for the instruction and guidance of road users on public and private land, including tunnels. In this document a number of different performance requirements (visual performance, EMC, environmental performance, etc) are covered, as well as durability. The EMC, safety and environmental requirements for both types of VMS are included in this document together with the visual performance for the discontinuous types VMS. The visual performance for continuous signs and discontinuous signs which are externally illuminated is covered by EN 12899-1. This document defines performance limits and a range of performance classes for both sign assemblies without vertical support and assemblies complete with vertical support.

Road vertical signs - Variable message traffic signs - Part 1: Product standard; German version EN 12966-1:2005+A1:2009

DB11/T 776.2-2011 道路智能化交通管理设施设置要求 第2部分：城市道路

Requirements for setting up road intelligent traffic management facilities Part 2: Urban roads

EN 13422:2004+A1:2009 便携式变形预警设备和装置.便携式道路交通标志.圆锥体和圆柱体

This document specifies requirements for new traffic cones and new traffic cylinders with retroreflective properties. This document specifies minimum essential visual and physical performance characteristics; test methods for determination of product performance and the means by which this performance may be communicated to the user and the public including safety enforcement agencies. The document provides a series of categories or classes by which a traffic cone or traffic cylinder may be specified for use in different applications in accordance with best practice. In the case of physical properties, performance levels and indicative tests are provided for cold weather, stability, and impact resistance when dropped. Requirements for visual recognition properties, colour, retroreflectivity and luminance are provided. All of the tests contained in this document already exist in one or more national technical standard(s) of Member State(s), or in legislative requirement(s) or code(s) of practice of Member State(s). Provision for identification and marking to declared levels of performance is provided. There are other product shapes which perform similar functions. This document does not cover devices made in other shapes, or which do not meet the design requirements of this document.

Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders

DIN EN 14388 Berichtigung 1:2008 道路交通减噪装置.规范.技术勘误DIN EN 14388-2005

Road traffic noise reducing devices - Specifications; German version EN 14388:2005, Corrigendum to DIN EN 14388:2005-10; German version EN 14388:2005/AC:2008

BS EN 12899-1:2007 固定的立式道路交通标志.固定标志

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and luminaires). The main intended use of fixed signs is for the instruction and guidance of road users on public and private land. Matters not covered by this standard: a) sign gantry and cantilever structures; b) signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics; c) variable message signs; d) signs used for temporary purposes; e) foundations; f) tests for extremely low temperatures.

Fixed, vertical road traffic signs — Part 1: Fixed signs

BS EN 12899-2:2007 固定的立式道路交通标志.穿透照射交通标柱(TTB)

This Part 2 of EN 12899 specifies requirements for new transilluminated traffic bollards (TTBs) including their fixing, which may incorporate traffic signs (type 1 TTB) or may support traffic signs (type 2 TTB) to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties as well as luminance of transilluminated illuminated portions are specified taking into account CIE recommendations. Structural requirements for TTBs include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. Devices of similar function, but without transillumination or less than 600 mm in height, are not covered. NOTE Foundations are not specified in this standard but should be adequate to support the loads to be carried. Unless otherwise stated, clauses in this standard apply to both type 1 and type 2 TTBs.

Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB)

DIN EN 12899-5:2008 固定、立式道路交通标志.第5部分:初始型测试

This Part 5 of EN 12899 describes the requirements for initial type testing (ITT), of Parts 1, 2 and 3 of EN 12899.

Fixed, vertical road traffic signs - Part 5: Initial type testing; English version of DIN EN 12899-5:2008-02

DIN EN 12899-3:2008 固定、立式道路交通标志.第3部分:反光灯柱子和反光镜

This Part 3 of EN 12899 specifies requirements for new delineator posts and for new retroreflectors as separate products or combined together to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties are specified taking into account CIE recommendations. Structural requirements include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. To define durability this standard also includes performance levels to be maintained after natural weathering exposure. No requirements are given for the use of colours, dimensions and tolerances of delineator posts and retroreflectors.

Fixed vertical road traffic signs - Part 3: Delineator posts and retroreflectors; English version of DIN EN 12899-3:2008-02

DIN EN 12899-4:2008 固定、立式道路交通标志.第4部分:工厂生产控制

This Part of EN 12899 describes the requirements for Factory production control(FPC), for Parts 1,2 and 3 of EN 12899.

Fixed, vertical road traffic signs - Part 4: Factory production control; English version of DIN EN 12899-4:2008-02