Q84 城市交通设施 标准查询与下载

DIN EN 12899-2:2008 固定、立式道路交通信号.第2部分:透射交通柱

This Part 2 of EN 12899 specifies requirements for new transilluminated traffic bollards (TTBs) including their fixing, which may incorporate traffic signs (type 1 TTB) or may support traffic signs (type 2 TTB) to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retrorefiective properties as well as luminance of transilluminated illuminated portions are specified taking into account CIE recommendations. Structural requirements for TTBs include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. Devices of similar function, but without transillumination or less than 600 mm in height, are not covered. NOTE Foundations are not specified in this standard but should be adequate to support the loads to be carried. Unless otherwise stated, clauses in this standard apply to both type 1 and type 2 TTBs.

Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB); English version of DIN EN 12899-2:2008-02

DIN EN 12899-1:2008 固定、立式道路交通标志.第1部分:固定的标志

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retrorefiective sheeting, supports and luminaires). The main intended use of fixed signs is for the instruction and guidance of road users on public and private land. Matters not covered by this standard: a) sign gantry and cantilever structures; b) signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics; c) variable message signs; d) signs used for temporary purposes; e) foundations; f) tests for extremely low temperatures.

Fixed, vertical road traffic signs - Part 1: Fixed signs; English version of DIN EN 12899-1:2008-02

BS EN 14389-1:2007 道路交通减噪装置.长期效能评估程序.第1部分:声学特性

This European Standard defines the means for evaluating the acoustic durability of Road Traffic Noise Reducing Devices. In this European Standard, the sound absorption is characterised by the single-number rating of sound reflection DLRI as defined in CEN/TS 1793-5. The airborne sound insulation is characterised by single-number rating of airborne sound insulation DLSI as defined in CEN/TS 1793-5.

Road traffic noise reducing devices — Procedures for assessing long term performance — Part 1: Acoustical characteristics

DIN VDE 0832-100:2007 道路交通信号系统

Road traffic signal systems; German version HD 638 S1:2001 + A1:2006

CEN EN 12899-4-2007 固定、垂直道路交通标志.第4部分:工厂生产管制

This Part of EN 12899 describes the requirements for Factory production control (FPC), for Parts 1, 2 and 3 of EN 12899.

Fixed, vertical road traffic signs - Part 4: Factory production control

CEN EN 12899-5-2007_ 固定、垂直道路交通标志.第5部分:初始类型测试

This Part 5 of EN 12899 describes the requirements for initial type testing (ITT), of Parts 1, 2 and 3 of EN 12899.

Fixed, vertical road traffic signs — Part 5: Initial type testing

CEN EN 12899-4-2007_ 固定、垂直道路交通标志.第4部分:工厂生产管制

This Part of EN 12899 describes the requirements for Factory production control (FPC), for Parts 1, 2 and 3 of EN 12899.

Fixed, vertical road traffic signs — Part 4: Factory production control

CEN EN 12899-3-2007_ 固定、道路交通标志.第3部分:路线反光标记桩和反光镜

This Part 3 of EN 12899 specifies requirements for new delineator posts and for new retroreflectors as separate products or combined together to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties are specified taking into account CIE recommendations. Structural requirements include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. To define durability this standard also includes performance levels to be maintained after natural weathering exposure. No requirements are given for the use of colours, dimensions and tolerances of delineator posts and retroreflectors.

Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors

CEN EN 12899-1-2007_ 固定、垂直道路交通标志.第1部分:固定标志

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and luminaires). The main intended use of fixed signs is for the instruction and guidance of road users on public and private land. Matters not covered by this standard: a) sign gantry and cantilever structures; b) signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics; c) variable message signs; d) signs used for temporary purposes; e) foundations; f) tests for extremely low temperatures.

Fixed, vertical road traffic signs — Part 1: Fixed signs

CEN EN 12899-5-2007 固定、垂直道路交通标志.第5部分:初始类型测试

This Part 5 of EN 12899 describes the requirements for initial type testing (ITT), of Parts 1, 2 and 3 of EN 12899.

Fixed, vertical road traffic signs - Part 5: Initial type testing

CEN EN 12899-3-2007 固定、道路交通标志.第3部分:路线反光标记桩和反光镜

This Part 3 of EN 12899 specifies requirements for new delineator posts and for new retroreflectors as separate products or combined together to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties are specified taking into account CIE recommendations. Structural requirements include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. To define durability this standard also includes performance levels to be maintained after natural weathering exposure. No requirements are given for the use of colours, dimensions and tolerances of delineator posts and retroreflectors.

Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors

CEN EN 12899-1-2007 固定、垂直道路交通标志.第1部分:固定标志

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and luminaires). The main intended use of fixed signs is for the instruction and guidance of road users on public and private land. Matters not covered by this standard: a) sign gantry and cantilever structures; b) signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics; c) variable message signs; d) signs used for temporary purposes; e) foundations; f) tests for extremely low temperatures.

Fixed, vertical road traffic signs - Part 1: Fixed signs

SANS 1463-2:2007 路标材料．回复反射路钉．第2部分：道路试验性能规范

Describes a test method for carrying out road trials on retroreflecting road studs for use in both permanent and temporary applications. Specifications are given for test sites and for application patterns, and a recommendation is given for the presentat

Road marking materials - Retroreflecting road studs Part 2: Road test performance specifications

SANS 731-1:2006 道路标记．第1部分：单包装溶剂型涂料

This part of SABS 731 specifies requirements for conventional solvent-borne paints suitable for marking traffic-bearing bituminous or concrete road and runway surfaces, and makes provision for white, yellow and other colours.

Road markings Part 1: Single-pack solvent-borne paints

SANS 731-2:2006 道路标记．第2部分：单包装水性涂料

Specifies requirements for conventional water-borne paints suitable for marking traffic-bearing bituminous or concrete road surfaces, and makes provision for white, yellow and other colours.

Road markings Part 2: Single-pack water-borne paints

NF P98-572-1:2006 道路垂直标志.可变信息交通标志.第1部分:产品标准

Road vertical signs - Variable message traffic signs - Part 1 : product standard.

SANS 972-1:2005 街道或资产标记用标识．第1部分：反光标识

Covers requirements for signs that are retro-reflective and that are used for the identification of streets and properties.

Signs for street and property identification Part 1: Retro-reflective signs

GA/T 484-2004 LED道路交通诱导可变标志

本标准规定了LED道路交通诱导可变标志的分类、命名、技术要求、试验方法、检验规则、标识、包装、运输与贮存。 本标准适用于道路交通诱导可变标志的设计、制造和验收。

LED variable sign of road traffic guide

SANS 1519-2:2004 路标．第2部分：性能要求

Covers the performance requirements of retro-reflective and non-reflective road signs for use as regulatory, warning, information and guidance signs on public roads.

Road signs Part 2: Performance requirements for road signs

SANS 1459:2004 红绿灯

Covers electrically operated signal lights for the warning and regulation of vehicular traffic and pedestrian traffic. Two classes of vehicular traffic lights, depending on their photometric performance, i.e. normal intensity and high intensity, are cove

Traffic lights