共找到 247 条与 标准化、质量管理 相关的标准,共 17 页
Insert a note after Section 5.2 containing the following: This method may be used for the determination of the specific gravity of tars by use of an additional appropriate hydrometer.
Standard Method of Test for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
This method of test is intended to determine the density of cohesive soil in the natural state, compacted cohesive soil, and stabilized soil by measuring the weight and volume of undisturbed samples.
Standard Method of Test for Density of Soil In-Place by Block, Chunk, or Core Sampling
The method covers the compaction of test specimens of bituminous paving mixtures by means of a mechanical compactor that imparts a kneading action to the test specimens by a series of individual impressions made with a ram.
Standard Method of Test for Preparation of Test Specimens of Bituminous Mixtures by Means of California Kneading Compactor
These methods cover the reduction of large samples of aggregate to the appropriate size for testing employing techniques that are intended to minimize variations in measured characteristics between the test samples so selected and the large sample.
Standard Method of Test for Reducing Samples of Aggregate to Testing Size
These methods are designed to test the qualifications of the organic coating of corrosion-resistant dowel bars to withstand the effects of weathering, deicing chemicals, and the abrading and loading stresses experienced in field joints.
Standard Method of Test for Coated Dowel Bars
This method covers the determination of the resistance of concrete specimens to the penetration of chloride ion. It is intended for use in determining the effects of variations in the properties of concrete on the resistance of the concrete to chloride i
Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
The National Transportation Communications for ITS Protocol (NTCIP) family of standards defines protocols and profiles that are open, consensus-based data communications standards. When used for the remote control of roadside and other transportation m
National Transportation Communications for ITS Protocol - The NTCIP Guide - updated version 3 v03.02b; A Recommended Information Report of the Joint Committee on the NTCIP
The fare collection domain covers the data needs for the functions related to fare policies, and selling, collection, processing, and accounting of fares from passengers. The business area also includes data
Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Fare Collection (FC) Business Area Objects v01.01; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-FC
This method of test is intended for determining the relationship between the moisture content and density of soils when compacted in a given mold of a given size with a 4.54-kg (10-lb) rammer dropped from a height of 457 mm (18 in.). Four alternate pro
Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
This standard specifies requirements and procedures for a certification system that shall be applicable to all suppliers of performance-graded asphalt binder (PGAB). The requirements and procedures shall apply to materials that meet the requirements of
Standard Recommended Practice for Certifying Suppliers of Performance-Graded Asphalt Binders
1.1. These methods of test are intended for determining the relation between the moisture content and density of soils compacted in a mold of a given size with a 2.5-kg (5.5-lb) rammer dropped from a height of 305 mm (12 in.). Four alternate procedures
Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
This method covers the calibration of the force (or torque) transducer and associated instrumentation of a mounted test wheel by using a calibration platform. It is used for establishing correction factors for changes in transducer output due to changes
Standard Method of Test for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
This test method provides standards for measuring pavement surface deflections, directly under, or at locations radially outward (offset) from a known static, steady-state, or impulse load.
Standard Method of Test for Pavement Deflection Measurements
This method describes a procedure for adjusting the densities of soil and soil aggregate mixtures to compensate for differing percentages of coarse particles retained on either the 4.75-mm (No. 4) or 19.0-mm (3/4-in.) sieve. This is necessary to adjust e
Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
SPECIFICATIONS COMMENTARY shall be limited to 2.5 percent of the structure height; and b) under group I load combination (dead load only), the slope at the top of vertical supports with moment load applications shall be limited to 30 mm per meter (0
Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals Fourth Edition; Interim 2002; Interim 2003
This standard is applicable to transportation devices and management systems that must operate in Intelligent Transportation Systems. As an application profile, it specifies a set of protocols and standards applicable to the application, presentation, a
National Transportation Communications for ITS Protocol Simple Transportation Management Framework Application Profile v01.08; A Joint Standard of AASHTO, ITE, and NEMA
This standard is applicable to transportation devices and management systems that must operate in Intelligent Transportation Systems. As a transport profile, it specifies a set of protocols and standards applicable to the transport and network layers of
National Transportation Communications for ITS Protocol Internet (TCP/IP and UDP/IP) Transport Profile v01.05; A Joint Standard of AASHTO, ITE, and NEMA
This standard is applicable to transportation devices and management systems that must operate in Intelligent Transportation Systems. As a transport profile, it specifies a set of protocols and standards applicable to the transport and network layers of
National Transportation Communications for ITS Protocol - Point to Multi-Point Protocol Using RS-232 Subnetwork Profile v01.19; A Joint Standard of AASHTO, ITE, and NEMA
This publication was prepared by the NTCIP Profiles Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Trans
National Transportation Communications for ITS Protocol Profile Framework v01.08; A Joint Information Management Policy of AASHTO, ITE, and NEMA
This publication was prepared by the NTCIP Profiles Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Trans
National Transportation Communications for ITS Protocol File Transfer Protocol Application Profile V01.06; A Joint Standard of AASHTO, ITE, and NEMA
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号