S04 基础标准与通用方法 标准查询与下载

DIN EN 50155:2002 轨道交通.铁路车辆用电子设备; 德文版本 EN 50155:2001

Railway applications - Electronic equipment used on rolling stock; German version EN 50155:2001

IEC 62278:2002 轨道交通.可靠性、可用性、可维修性和安全性(RAMS)规范及示例

Provides Railway Authorities and railway support industry with a process which will enable the implementation of a consistent approach to the management of reliability, availability, maintainability and safety, denoted by the acronym RAMS. Processes for

Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS)

KS R 9146-2002 铁路车辆零配件耐冲击试验方法

이 규격은 철도 차량의 차체, 대차의 용수철 윗부분에 부착하는 기기 및 부품[이하 부품(1

Railway rolling stock parts－Test methods for shock

DIN VDE 0115-1:2002 铁路应用.一般构造和安全要求.第1部分:补充要求

Railways applications - General construction and safety requirements - Part 1: Additional requirements

TB/T 3050-2002 铁路沿线环境噪声测量技术规定

本标准规定了铁路沿线两侧噪声测量的原则、方法、内容和要求。 本标准适用于铁路沿线主要受铁路噪声影响区域的噪声测量。 本标准适用于铁路噪声监测和环境影响评价中的铁路噪声现状调查。

Technical regulations on environmental noise measurement along railway lines

TB/T 1913-2002 铁路一般劳动防护服

本标准规定了铁路一般劳动防护服的分类、面料、辅料及成品要求、试验方法、检验规则、标记、包装、运输和储存。 本标准适用于铁路系统的以织物为面料，采用缝制工艺制作的铁路一般防护服、铁路桔黄色标志服和铁路高可视性警示服。

Railway general protective clothing

TB/T 2001-2002 产品图样及设计文件 术语

本标准规定了铁道产品图样和设计文件，包括CAD图样和设计文件(以下简称图样及文件)相关术语及其定义。 本标准适用于铁道产品图样及文件的设计、使用和管理工作中的术语。

Terminology for Product Drawings and Design Documents

TB/T 1124-2002 机车车辆通用件图样编号办法

本标准规定了铁道机车车辆通用件的分类和图样编号办法。 本标准适用于内燃机车、电力机车、客车、货车通用件的图样编号。 其他产品通用件可参照执行。

Method for numbering drawings of common parts of rolling stock

TB/T 2004-2002 产品图样及设计文件 更改办法

本标准规定了铁道产品图样和设计文件，包括CAI〕图样及设计文件(以下简称图样及文件)的更改原则、更改方法、更改程序与更改管理等。 本标准适用于铁道产品图样及文件的更改。其他产品图样及文件的更改可参照执行。

Changes to product drawings and design documents

BS ISO 10326-2:2001 机械振动.评价车辆座椅振动的实验室方法.用于铁路车辆

This part of ISO 10326 defines specifications covering laboratory tests for seats designed for passengers and crew in railway tractive and trailer vehicles. It concerns tri-axial rectilinear vibration within the frequency range 0,5 Hz to 50 Hz. It specifies the input test vibration to be used at seat testing. This part of ISO 10326 makes it possible to characterize, in the form of frequency response functions, the manner in which vibration is transmitted to the seat occupant. However, this characterization is fully valid only when the man-seat system can be considered to be sufficiently linear.

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Application to railway vehicles

DIN EN 50124-1:2001 轨道交通.绝缘协调.第1部分:基本要求.所有电气和电子设备的余隙和蠕变距离

Railway applications - Insulation coordination - Part 1: Basic requirements; Clearances and creepage distances for all electrical and electronic equipment; German version EN 50124-1:2001

DIN EN 50124-2:2001 轨道交通.绝缘配合.第2部分:过电压和相应保护

Railway applications - Insulation coordination - Part 2: Overvoltages and related protection; German version EN 50124-2:2001

KS R 9111-2001 铁路车辆术语

이 규격은 보통 철도의 철도 차량에 관하여 사용되는, 주요한 일반 용어에 대하여 규정한다.

Glossary of terms for railway rolling stock(General)

PD R009-005-2001 轨道交通.在多点牵引操作下货运用牵引车辆的无线电遥控系统

Railway applications. Radio remote control system of traction vehicle for freight traffic in multiple traction operation

ISO 10056:2001 机械振动 有轨车辆中乘客和乘务员全身振动的测量和分析

This International Standard defines a method for measuring and analysing the mechanical vibration of railway vehicles during field tests. It deals with periodic, random and transient vibration over the range of frequencies from 0,5 Hz to 80 Hz which are transmitted to the whole human body. This International Standard covers standing and seating positions only. This International Standard is not applicable to vibration transmitted to the hand-arm system, nor to very-low-frequency lateral, vertical or rotational motion which may be associated with kinetosis (motion sickness). This International Standard does not propose methods for assessing the effects of vibration. This is covered by ISO 2631-1 and, for fixed guideway transport systems, by ISO 2631-4.

Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles

JIS E 4025:2001 外部铁道车辆噪声.试验方法

この規格は，鉄道車両(以下，車両という。)の外部での騒音試験方法(以下，試験という。)について規定する。

Noise of outside railway rolling stock -- Test methods

TB/T 1943-2001 中国铁路叙词表的编制与使用规则

本标准规定了《中国铁路叙词表》的叙词选词原则与范围、体系结构及使用规则，适用于《中国铁路叙词表》的编制与使用。

Rules for Compilation and Use of Chinese Railway Thesaurus

TB/T 122-2001 机车车辆产品图样及设计文件编号原则

本标准规定了铁道机车车辆产品图样及设计文件(以下简称图样和文件)编号的基本原则。 本标准适用于图样和文件的编号，各企业可参照本标准制定企业标准。

Numbering principles for drawings and design documents of rolling stock products

BS EN 50124-1:2001+A2:2005 轨道交通.绝缘协调.基本要求.所有电气和电子设备的余隙距离和爬电距离

The whole document deals with insulation coordination in railways. It applies to equipment for use in signalling, rolling stock and fixed installations up to 2 000 m above sea level. Insulation coordination is concerned with the selection, dimensioning and correlation of insulation both within and between items of equipment. In dimensioning insulation, electrical stresses and environmental conditions are taken into account. For the same conditions and stresses these dimensions are the same. An objective of insulation coordination is to avoid unnecessary overdimensioning of insulation. This standard specifies:

Railway applications - Insulation coordination - Basic requirements - Clearances and creepage distances for all electrical and electronic equipment

BS EN 50124-2:2001 轨道交通.绝缘协调.过电压和相应保护

This European Standard applies to: - fixed installations (downstream the secondary of the substation transformer) and rolling stock equipment linked to the contact line of one of the systems defined in EN 50163; - rolling stock equipment linked to a train line. This standard gives simulation and/or test requirements for protection against transient overvoltages of such equipment. Long-term overvoltages are not treated in this document.

Railway applications. Insulation coordination. Part 2: Overvoltages and related protection